// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License.

//! Defines kernels suitable to perform operations to primitive arrays.

use arrow_array::builder::BufferBuilder;
use arrow_array::types::ArrowDictionaryKeyType;
use arrow_array::*;
use arrow_buffer::buffer::NullBuffer;
use arrow_buffer::{Buffer, MutableBuffer};
use arrow_data::ArrayData;
use arrow_schema::ArrowError;
use std::sync::Arc;

/// See [`PrimitiveArray::unary`]
pub fn unary<I, F, O>(array: &PrimitiveArray<I>, op: F) -> PrimitiveArray<O>
where
    I: ArrowPrimitiveType,
    O: ArrowPrimitiveType,
    F: Fn(I::Native) -> O::Native,
{
    array.unary(op)
}

/// See [`PrimitiveArray::unary_mut`]
pub fn unary_mut<I, F>(
    array: PrimitiveArray<I>,
    op: F,
) -> Result<PrimitiveArray<I>, PrimitiveArray<I>>
where
    I: ArrowPrimitiveType,
    F: Fn(I::Native) -> I::Native,
{
    array.unary_mut(op)
}

/// See [`PrimitiveArray::try_unary`]
pub fn try_unary<I, F, O>(
    array: &PrimitiveArray<I>,
    op: F,
) -> Result<PrimitiveArray<O>, ArrowError>
where
    I: ArrowPrimitiveType,
    O: ArrowPrimitiveType,
    F: Fn(I::Native) -> Result<O::Native, ArrowError>,
{
    array.try_unary(op)
}

/// See [`PrimitiveArray::try_unary_mut`]
pub fn try_unary_mut<I, F>(
    array: PrimitiveArray<I>,
    op: F,
) -> Result<Result<PrimitiveArray<I>, ArrowError>, PrimitiveArray<I>>
where
    I: ArrowPrimitiveType,
    F: Fn(I::Native) -> Result<I::Native, ArrowError>,
{
    array.try_unary_mut(op)
}

/// A helper function that applies an infallible unary function to a dictionary array with primitive value type.
fn unary_dict<K, F, T>(array: &DictionaryArray<K>, op: F) -> Result<ArrayRef, ArrowError>
where
    K: ArrowDictionaryKeyType + ArrowNumericType,
    T: ArrowPrimitiveType,
    F: Fn(T::Native) -> T::Native,
{
    let dict_values = array.values().as_any().downcast_ref().unwrap();
    let values = unary::<T, F, T>(dict_values, op);
    Ok(Arc::new(array.with_values(Arc::new(values))))
}

/// A helper function that applies a fallible unary function to a dictionary array with primitive value type.
fn try_unary_dict<K, F, T>(
    array: &DictionaryArray<K>,
    op: F,
) -> Result<ArrayRef, ArrowError>
where
    K: ArrowDictionaryKeyType + ArrowNumericType,
    T: ArrowPrimitiveType,
    F: Fn(T::Native) -> Result<T::Native, ArrowError>,
{
    if !PrimitiveArray::<T>::is_compatible(&array.value_type()) {
        return Err(ArrowError::CastError(format!(
            "Cannot perform the unary operation of type {} on dictionary array of value type {}",
            T::DATA_TYPE,
            array.value_type()
        )));
    }

    let dict_values = array.values().as_any().downcast_ref().unwrap();
    let values = try_unary::<T, F, T>(dict_values, op)?;
    Ok(Arc::new(array.with_values(Arc::new(values))))
}

/// Applies an infallible unary function to an array with primitive values.
#[deprecated(note = "Use arrow_array::AnyDictionaryArray")]
pub fn unary_dyn<F, T>(array: &dyn Array, op: F) -> Result<ArrayRef, ArrowError>
where
    T: ArrowPrimitiveType,
    F: Fn(T::Native) -> T::Native,
{
    downcast_dictionary_array! {
        array => unary_dict::<_, F, T>(array, op),
        t => {
            if PrimitiveArray::<T>::is_compatible(t) {
                Ok(Arc::new(unary::<T, F, T>(
                    array.as_any().downcast_ref::<PrimitiveArray<T>>().unwrap(),
                    op,
                )))
            } else {
                Err(ArrowError::NotYetImplemented(format!(
                    "Cannot perform unary operation of type {} on array of type {}",
                    T::DATA_TYPE,
                    t
                )))
            }
        }
    }
}

/// Applies a fallible unary function to an array with primitive values.
#[deprecated(note = "Use arrow_array::AnyDictionaryArray")]
pub fn try_unary_dyn<F, T>(array: &dyn Array, op: F) -> Result<ArrayRef, ArrowError>
where
    T: ArrowPrimitiveType,
    F: Fn(T::Native) -> Result<T::Native, ArrowError>,
{
    downcast_dictionary_array! {
        array => if array.values().data_type() == &T::DATA_TYPE {
            try_unary_dict::<_, F, T>(array, op)
        } else {
            Err(ArrowError::NotYetImplemented(format!(
                "Cannot perform unary operation on dictionary array of type {}",
                array.data_type()
            )))
        },
        t => {
            if PrimitiveArray::<T>::is_compatible(t) {
                Ok(Arc::new(try_unary::<T, F, T>(
                    array.as_any().downcast_ref::<PrimitiveArray<T>>().unwrap(),
                    op,
                )?))
            } else {
                Err(ArrowError::NotYetImplemented(format!(
                    "Cannot perform unary operation of type {} on array of type {}",
                    T::DATA_TYPE,
                    t
                )))
            }
        }
    }
}

/// Given two arrays of length `len`, calls `op(a[i], b[i])` for `i` in `0..len`, collecting
/// the results in a [`PrimitiveArray`]. If any index is null in either `a` or `b`, the
/// corresponding index in the result will also be null
///
/// Like [`unary`] the provided function is evaluated for every index, ignoring validity. This
/// is beneficial when the cost of the operation is low compared to the cost of branching, and
/// especially when the operation can be vectorised, however, requires `op` to be infallible
/// for all possible values of its inputs
///
/// # Error
///
/// This function gives error if the arrays have different lengths
pub fn binary<A, B, F, O>(
    a: &PrimitiveArray<A>,
    b: &PrimitiveArray<B>,
    op: F,
) -> Result<PrimitiveArray<O>, ArrowError>
where
    A: ArrowPrimitiveType,
    B: ArrowPrimitiveType,
    O: ArrowPrimitiveType,
    F: Fn(A::Native, B::Native) -> O::Native,
{
    if a.len() != b.len() {
        return Err(ArrowError::ComputeError(
            "Cannot perform binary operation on arrays of different length".to_string(),
        ));
    }

    if a.is_empty() {
        return Ok(PrimitiveArray::from(ArrayData::new_empty(&O::DATA_TYPE)));
    }

    let nulls = NullBuffer::union(a.logical_nulls().as_ref(), b.logical_nulls().as_ref());

    let values = a.values().iter().zip(b.values()).map(|(l, r)| op(*l, *r));
    // JUSTIFICATION
    //  Benefit
    //      ~60% speedup
    //  Soundness
    //      `values` is an iterator with a known size from a PrimitiveArray
    let buffer = unsafe { Buffer::from_trusted_len_iter(values) };
    Ok(PrimitiveArray::new(buffer.into(), nulls))
}

/// Given two arrays of length `len`, calls `op(a[i], b[i])` for `i` in `0..len`, mutating
/// the mutable [`PrimitiveArray`] `a`. If any index is null in either `a` or `b`, the
/// corresponding index in the result will also be null.
///
/// Mutable primitive array means that the buffer is not shared with other arrays.
/// As a result, this mutates the buffer directly without allocating new buffer.
///
/// Like [`unary`] the provided function is evaluated for every index, ignoring validity. This
/// is beneficial when the cost of the operation is low compared to the cost of branching, and
/// especially when the operation can be vectorised, however, requires `op` to be infallible
/// for all possible values of its inputs
///
/// # Error
///
/// This function gives error if the arrays have different lengths.
/// This function gives error of original [`PrimitiveArray`] `a` if it is not a mutable
/// primitive array.
pub fn binary_mut<T, F>(
    a: PrimitiveArray<T>,
    b: &PrimitiveArray<T>,
    op: F,
) -> Result<Result<PrimitiveArray<T>, ArrowError>, PrimitiveArray<T>>
where
    T: ArrowPrimitiveType,
    F: Fn(T::Native, T::Native) -> T::Native,
{
    if a.len() != b.len() {
        return Ok(Err(ArrowError::ComputeError(
            "Cannot perform binary operation on arrays of different length".to_string(),
        )));
    }

    if a.is_empty() {
        return Ok(Ok(PrimitiveArray::from(ArrayData::new_empty(
            &T::DATA_TYPE,
        ))));
    }

    let nulls = NullBuffer::union(a.logical_nulls().as_ref(), b.logical_nulls().as_ref());

    let mut builder = a.into_builder()?;

    builder
        .values_slice_mut()
        .iter_mut()
        .zip(b.values())
        .for_each(|(l, r)| *l = op(*l, *r));

    let array_builder = builder.finish().into_data().into_builder().nulls(nulls);

    let array_data = unsafe { array_builder.build_unchecked() };
    Ok(Ok(PrimitiveArray::<T>::from(array_data)))
}

/// Applies the provided fallible binary operation across `a` and `b`, returning any error,
/// and collecting the results into a [`PrimitiveArray`]. If any index is null in either `a`
/// or `b`, the corresponding index in the result will also be null
///
/// Like [`try_unary`] the function is only evaluated for non-null indices
///
/// # Error
///
/// Return an error if the arrays have different lengths or
/// the operation is under erroneous
pub fn try_binary<A: ArrayAccessor, B: ArrayAccessor, F, O>(
    a: A,
    b: B,
    op: F,
) -> Result<PrimitiveArray<O>, ArrowError>
where
    O: ArrowPrimitiveType,
    F: Fn(A::Item, B::Item) -> Result<O::Native, ArrowError>,
{
    if a.len() != b.len() {
        return Err(ArrowError::ComputeError(
            "Cannot perform a binary operation on arrays of different length".to_string(),
        ));
    }
    if a.is_empty() {
        return Ok(PrimitiveArray::from(ArrayData::new_empty(&O::DATA_TYPE)));
    }
    let len = a.len();

    if a.null_count() == 0 && b.null_count() == 0 {
        try_binary_no_nulls(len, a, b, op)
    } else {
        let nulls =
            NullBuffer::union(a.logical_nulls().as_ref(), b.logical_nulls().as_ref())
                .unwrap();

        let mut buffer = BufferBuilder::<O::Native>::new(len);
        buffer.append_n_zeroed(len);
        let slice = buffer.as_slice_mut();

        nulls.try_for_each_valid_idx(|idx| {
            unsafe {
                *slice.get_unchecked_mut(idx) =
                    op(a.value_unchecked(idx), b.value_unchecked(idx))?
            };
            Ok::<_, ArrowError>(())
        })?;

        let values = buffer.finish().into();
        Ok(PrimitiveArray::new(values, Some(nulls)))
    }
}

/// Applies the provided fallible binary operation across `a` and `b` by mutating the mutable
/// [`PrimitiveArray`] `a` with the results, returning any error. If any index is null in
/// either `a` or `b`, the corresponding index in the result will also be null
///
/// Like [`try_unary`] the function is only evaluated for non-null indices
///
/// Mutable primitive array means that the buffer is not shared with other arrays.
/// As a result, this mutates the buffer directly without allocating new buffer.
///
/// # Error
///
/// Return an error if the arrays have different lengths or
/// the operation is under erroneous.
/// This function gives error of original [`PrimitiveArray`] `a` if it is not a mutable
/// primitive array.
pub fn try_binary_mut<T, F>(
    a: PrimitiveArray<T>,
    b: &PrimitiveArray<T>,
    op: F,
) -> Result<Result<PrimitiveArray<T>, ArrowError>, PrimitiveArray<T>>
where
    T: ArrowPrimitiveType,
    F: Fn(T::Native, T::Native) -> Result<T::Native, ArrowError>,
{
    if a.len() != b.len() {
        return Ok(Err(ArrowError::ComputeError(
            "Cannot perform binary operation on arrays of different length".to_string(),
        )));
    }
    let len = a.len();

    if a.is_empty() {
        return Ok(Ok(PrimitiveArray::from(ArrayData::new_empty(
            &T::DATA_TYPE,
        ))));
    }

    if a.null_count() == 0 && b.null_count() == 0 {
        try_binary_no_nulls_mut(len, a, b, op)
    } else {
        let nulls =
            NullBuffer::union(a.logical_nulls().as_ref(), b.logical_nulls().as_ref())
                .unwrap();

        let mut builder = a.into_builder()?;

        let slice = builder.values_slice_mut();

        match nulls.try_for_each_valid_idx(|idx| {
            unsafe {
                *slice.get_unchecked_mut(idx) =
                    op(*slice.get_unchecked(idx), b.value_unchecked(idx))?
            };
            Ok::<_, ArrowError>(())
        }) {
            Ok(_) => {}
            Err(err) => return Ok(Err(err)),
        };

        let array_builder = builder.finish().into_data().into_builder();
        let array_data = unsafe { array_builder.nulls(Some(nulls)).build_unchecked() };
        Ok(Ok(PrimitiveArray::<T>::from(array_data)))
    }
}

/// This intentional inline(never) attribute helps LLVM optimize the loop.
#[inline(never)]
fn try_binary_no_nulls<A: ArrayAccessor, B: ArrayAccessor, F, O>(
    len: usize,
    a: A,
    b: B,
    op: F,
) -> Result<PrimitiveArray<O>, ArrowError>
where
    O: ArrowPrimitiveType,
    F: Fn(A::Item, B::Item) -> Result<O::Native, ArrowError>,
{
    let mut buffer = MutableBuffer::new(len * O::get_byte_width());
    for idx in 0..len {
        unsafe {
            buffer.push_unchecked(op(a.value_unchecked(idx), b.value_unchecked(idx))?);
        };
    }
    Ok(PrimitiveArray::new(buffer.into(), None))
}

/// This intentional inline(never) attribute helps LLVM optimize the loop.
#[inline(never)]
fn try_binary_no_nulls_mut<T, F>(
    len: usize,
    a: PrimitiveArray<T>,
    b: &PrimitiveArray<T>,
    op: F,
) -> Result<Result<PrimitiveArray<T>, ArrowError>, PrimitiveArray<T>>
where
    T: ArrowPrimitiveType,
    F: Fn(T::Native, T::Native) -> Result<T::Native, ArrowError>,
{
    let mut builder = a.into_builder()?;
    let slice = builder.values_slice_mut();

    for idx in 0..len {
        unsafe {
            match op(*slice.get_unchecked(idx), b.value_unchecked(idx)) {
                Ok(value) => *slice.get_unchecked_mut(idx) = value,
                Err(err) => return Ok(Err(err)),
            };
        };
    }
    Ok(Ok(builder.finish()))
}

#[cfg(test)]
mod tests {
    use super::*;
    use arrow_array::builder::*;
    use arrow_array::types::*;

    #[test]
    #[allow(deprecated)]
    fn test_unary_f64_slice() {
        let input =
            Float64Array::from(vec![Some(5.1f64), None, Some(6.8), None, Some(7.2)]);
        let input_slice = input.slice(1, 4);
        let result = unary(&input_slice, |n| n.round());
        assert_eq!(
            result,
            Float64Array::from(vec![None, Some(7.0), None, Some(7.0)])
        );

        let result = unary_dyn::<_, Float64Type>(&input_slice, |n| n + 1.0).unwrap();

        assert_eq!(
            result.as_any().downcast_ref::<Float64Array>().unwrap(),
            &Float64Array::from(vec![None, Some(7.8), None, Some(8.2)])
        );
    }

    #[test]
    #[allow(deprecated)]
    fn test_unary_dict_and_unary_dyn() {
        let mut builder = PrimitiveDictionaryBuilder::<Int8Type, Int32Type>::new();
        builder.append(5).unwrap();
        builder.append(6).unwrap();
        builder.append(7).unwrap();
        builder.append(8).unwrap();
        builder.append_null();
        builder.append(9).unwrap();
        let dictionary_array = builder.finish();

        let mut builder = PrimitiveDictionaryBuilder::<Int8Type, Int32Type>::new();
        builder.append(6).unwrap();
        builder.append(7).unwrap();
        builder.append(8).unwrap();
        builder.append(9).unwrap();
        builder.append_null();
        builder.append(10).unwrap();
        let expected = builder.finish();

        let result = unary_dict::<_, _, Int32Type>(&dictionary_array, |n| n + 1).unwrap();
        assert_eq!(
            result
                .as_any()
                .downcast_ref::<DictionaryArray<Int8Type>>()
                .unwrap(),
            &expected
        );

        let result = unary_dyn::<_, Int32Type>(&dictionary_array, |n| n + 1).unwrap();
        assert_eq!(
            result
                .as_any()
                .downcast_ref::<DictionaryArray<Int8Type>>()
                .unwrap(),
            &expected
        );
    }

    #[test]
    fn test_binary_mut() {
        let a = Int32Array::from(vec![15, 14, 9, 8, 1]);
        let b = Int32Array::from(vec![Some(1), None, Some(3), None, Some(5)]);
        let c = binary_mut(a, &b, |l, r| l + r).unwrap().unwrap();

        let expected = Int32Array::from(vec![Some(16), None, Some(12), None, Some(6)]);
        assert_eq!(c, expected);
    }

    #[test]
    fn test_try_binary_mut() {
        let a = Int32Array::from(vec![15, 14, 9, 8, 1]);
        let b = Int32Array::from(vec![Some(1), None, Some(3), None, Some(5)]);
        let c = try_binary_mut(a, &b, |l, r| Ok(l + r)).unwrap().unwrap();

        let expected = Int32Array::from(vec![Some(16), None, Some(12), None, Some(6)]);
        assert_eq!(c, expected);

        let a = Int32Array::from(vec![15, 14, 9, 8, 1]);
        let b = Int32Array::from(vec![1, 2, 3, 4, 5]);
        let c = try_binary_mut(a, &b, |l, r| Ok(l + r)).unwrap().unwrap();
        let expected = Int32Array::from(vec![16, 16, 12, 12, 6]);
        assert_eq!(c, expected);

        let a = Int32Array::from(vec![15, 14, 9, 8, 1]);
        let b = Int32Array::from(vec![Some(1), None, Some(3), None, Some(5)]);
        let _ = try_binary_mut(a, &b, |l, r| {
            if l == 1 {
                Err(ArrowError::InvalidArgumentError(
                    "got error".parse().unwrap(),
                ))
            } else {
                Ok(l + r)
            }
        })
        .unwrap()
        .expect_err("should got error");
    }

    #[test]
    fn test_unary_dict_mut() {
        let values = Int32Array::from(vec![Some(10), Some(20), None]);
        let keys = Int8Array::from_iter_values([0, 0, 1, 2]);
        let dictionary = DictionaryArray::new(keys, Arc::new(values));

        let updated = dictionary.unary_mut::<_, Int32Type>(|x| x + 1).unwrap();
        let typed = updated.downcast_dict::<Int32Array>().unwrap();
        assert_eq!(typed.value(0), 11);
        assert_eq!(typed.value(1), 11);
        assert_eq!(typed.value(2), 21);

        let values = updated.values();
        assert!(values.is_null(2));
    }
}