#[doc = "Register `TCCR4A` reader"]
pub struct R(crate::R<TCCR4A_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<TCCR4A_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<TCCR4A_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<TCCR4A_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `TCCR4A` writer"]
pub struct W(crate::W<TCCR4A_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<TCCR4A_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<TCCR4A_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<TCCR4A_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `PWM4B` reader - No Description."]
pub type PWM4B_R = crate::BitReader<bool>;
#[doc = "Field `PWM4B` writer - No Description."]
pub type PWM4B_W<'a, const O: u8> = crate::BitWriter<'a, u8, TCCR4A_SPEC, bool, O>;
#[doc = "Field `PWM4A` reader - No Description."]
pub type PWM4A_R = crate::BitReader<bool>;
#[doc = "Field `PWM4A` writer - No Description."]
pub type PWM4A_W<'a, const O: u8> = crate::BitWriter<'a, u8, TCCR4A_SPEC, bool, O>;
#[doc = "Field `FOC4B` writer - Force Output Compare Match 4B"]
pub type FOC4B_W<'a, const O: u8> = crate::BitWriter<'a, u8, TCCR4A_SPEC, bool, O>;
#[doc = "Field `FOC4A` writer - Force Output Compare Match 4A"]
pub type FOC4A_W<'a, const O: u8> = crate::BitWriter<'a, u8, TCCR4A_SPEC, bool, O>;
#[doc = "Field `COM4B` reader - Compare Output Mode 4B, bits"]
pub type COM4B_R = crate::FieldReader<u8, COM4B_A>;
#[doc = "Compare Output Mode 4B, bits\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum COM4B_A {
#[doc = "0: Normal port operation, OCix disconnected"]
DISCONNECTED = 0,
#[doc = "1: Toggle OCix on Compare Match (Might depend on WGM)"]
MATCH_TOGGLE = 1,
#[doc = "2: Clear OCix on Compare Match (If PWM is enabled, OCix is set at TOP)"]
MATCH_CLEAR = 2,
#[doc = "3: Set OCix on Compare Match (If PWM is enabled, OCix is cleared at TOP)"]
MATCH_SET = 3,
}
impl From<COM4B_A> for u8 {
#[inline(always)]
fn from(variant: COM4B_A) -> Self {
variant as _
}
}
impl COM4B_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> COM4B_A {
match self.bits {
0 => COM4B_A::DISCONNECTED,
1 => COM4B_A::MATCH_TOGGLE,
2 => COM4B_A::MATCH_CLEAR,
3 => COM4B_A::MATCH_SET,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISCONNECTED`"]
#[inline(always)]
pub fn is_disconnected(&self) -> bool {
*self == COM4B_A::DISCONNECTED
}
#[doc = "Checks if the value of the field is `MATCH_TOGGLE`"]
#[inline(always)]
pub fn is_match_toggle(&self) -> bool {
*self == COM4B_A::MATCH_TOGGLE
}
#[doc = "Checks if the value of the field is `MATCH_CLEAR`"]
#[inline(always)]
pub fn is_match_clear(&self) -> bool {
*self == COM4B_A::MATCH_CLEAR
}
#[doc = "Checks if the value of the field is `MATCH_SET`"]
#[inline(always)]
pub fn is_match_set(&self) -> bool {
*self == COM4B_A::MATCH_SET
}
}
#[doc = "Field `COM4B` writer - Compare Output Mode 4B, bits"]
pub type COM4B_W<'a, const O: u8> = crate::FieldWriterSafe<'a, u8, TCCR4A_SPEC, u8, COM4B_A, 2, O>;
impl<'a, const O: u8> COM4B_W<'a, O> {
#[doc = "Normal port operation, OCix disconnected"]
#[inline(always)]
pub fn disconnected(self) -> &'a mut W {
self.variant(COM4B_A::DISCONNECTED)
}
#[doc = "Toggle OCix on Compare Match (Might depend on WGM)"]
#[inline(always)]
pub fn match_toggle(self) -> &'a mut W {
self.variant(COM4B_A::MATCH_TOGGLE)
}
#[doc = "Clear OCix on Compare Match (If PWM is enabled, OCix is set at TOP)"]
#[inline(always)]
pub fn match_clear(self) -> &'a mut W {
self.variant(COM4B_A::MATCH_CLEAR)
}
#[doc = "Set OCix on Compare Match (If PWM is enabled, OCix is cleared at TOP)"]
#[inline(always)]
pub fn match_set(self) -> &'a mut W {
self.variant(COM4B_A::MATCH_SET)
}
}
#[doc = "Field `COM4A` reader - Compare Output Mode 1A, bits"]
pub use COM4B_R as COM4A_R;
#[doc = "Field `COM4A` writer - Compare Output Mode 1A, bits"]
pub use COM4B_W as COM4A_W;
impl R {
#[doc = "Bit 0 - No Description."]
#[inline(always)]
pub fn pwm4b(&self) -> PWM4B_R {
PWM4B_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - No Description."]
#[inline(always)]
pub fn pwm4a(&self) -> PWM4A_R {
PWM4A_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bits 4:5 - Compare Output Mode 4B, bits"]
#[inline(always)]
pub fn com4b(&self) -> COM4B_R {
COM4B_R::new((self.bits >> 4) & 3)
}
#[doc = "Bits 6:7 - Compare Output Mode 1A, bits"]
#[inline(always)]
pub fn com4a(&self) -> COM4A_R {
COM4A_R::new((self.bits >> 6) & 3)
}
}
impl W {
#[doc = "Bit 0 - No Description."]
#[inline(always)]
#[must_use]
pub fn pwm4b(&mut self) -> PWM4B_W<0> {
PWM4B_W::new(self)
}
#[doc = "Bit 1 - No Description."]
#[inline(always)]
#[must_use]
pub fn pwm4a(&mut self) -> PWM4A_W<1> {
PWM4A_W::new(self)
}
#[doc = "Bit 2 - Force Output Compare Match 4B"]
#[inline(always)]
#[must_use]
pub fn foc4b(&mut self) -> FOC4B_W<2> {
FOC4B_W::new(self)
}
#[doc = "Bit 3 - Force Output Compare Match 4A"]
#[inline(always)]
#[must_use]
pub fn foc4a(&mut self) -> FOC4A_W<3> {
FOC4A_W::new(self)
}
#[doc = "Bits 4:5 - Compare Output Mode 4B, bits"]
#[inline(always)]
#[must_use]
pub fn com4b(&mut self) -> COM4B_W<4> {
COM4B_W::new(self)
}
#[doc = "Bits 6:7 - Compare Output Mode 1A, bits"]
#[inline(always)]
#[must_use]
pub fn com4a(&mut self) -> COM4A_W<6> {
COM4A_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Timer/Counter4 Control Register A\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [tccr4a](index.html) module"]
pub struct TCCR4A_SPEC;
impl crate::RegisterSpec for TCCR4A_SPEC {
type Ux = u8;
}
#[doc = "`read()` method returns [tccr4a::R](R) reader structure"]
impl crate::Readable for TCCR4A_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [tccr4a::W](W) writer structure"]
impl crate::Writable for TCCR4A_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets TCCR4A to value 0"]
impl crate::Resettable for TCCR4A_SPEC {
const RESET_VALUE: Self::Ux = 0;
}