// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::put_key_policy::_put_key_policy_output::PutKeyPolicyOutputBuilder;

pub use crate::operation::put_key_policy::_put_key_policy_input::PutKeyPolicyInputBuilder;

impl PutKeyPolicyInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::put_key_policy::PutKeyPolicyOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::put_key_policy::PutKeyPolicyError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.put_key_policy();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `PutKeyPolicy`.
///
/// <p>Attaches a key policy to the specified KMS key.</p>
/// <p>For more information about key policies, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policies.html">Key Policies</a> in the <i>Key Management Service Developer Guide</i>. For help writing and formatting a JSON policy document, see the <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies.html">IAM JSON Policy Reference</a> in the <i> <i>Identity and Access Management User Guide</i> </i>. For examples of adding a key policy in multiple programming languages, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-key-policies.html#put-policy">Setting a key policy</a> in the <i>Key Management Service Developer Guide</i>.</p>
/// <p><b>Cross-account use</b>: No. You cannot perform this operation on a KMS key in a different Amazon Web Services account.</p>
/// <p><b>Required permissions</b>: <a href="https://docs.aws.amazon.com/kms/latest/developerguide/kms-api-permissions-reference.html">kms:PutKeyPolicy</a> (key policy)</p>
/// <p><b>Related operations</b>: <code>GetKeyPolicy</code></p>
/// <p><b>Eventual consistency</b>: The KMS API follows an eventual consistency model. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-eventual-consistency.html">KMS eventual consistency</a>.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct PutKeyPolicyFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::put_key_policy::builders::PutKeyPolicyInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::put_key_policy::PutKeyPolicyOutput,
        crate::operation::put_key_policy::PutKeyPolicyError,
    > for PutKeyPolicyFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::put_key_policy::PutKeyPolicyOutput,
            crate::operation::put_key_policy::PutKeyPolicyError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl PutKeyPolicyFluentBuilder {
    /// Creates a new `PutKeyPolicy`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the PutKeyPolicy as a reference.
    pub fn as_input(&self) -> &crate::operation::put_key_policy::builders::PutKeyPolicyInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::put_key_policy::PutKeyPolicyOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::put_key_policy::PutKeyPolicyError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::put_key_policy::PutKeyPolicy::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::put_key_policy::PutKeyPolicy::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::put_key_policy::PutKeyPolicyOutput,
        crate::operation::put_key_policy::PutKeyPolicyError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>Sets the key policy on the specified KMS key.</p>
    /// <p>Specify the key ID or key ARN of the KMS key.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>.</p>
    pub fn key_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.key_id(input.into());
        self
    }
    /// <p>Sets the key policy on the specified KMS key.</p>
    /// <p>Specify the key ID or key ARN of the KMS key.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>.</p>
    pub fn set_key_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_key_id(input);
        self
    }
    /// <p>Sets the key policy on the specified KMS key.</p>
    /// <p>Specify the key ID or key ARN of the KMS key.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>.</p>
    pub fn get_key_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_key_id()
    }
    /// <p>The name of the key policy. If no policy name is specified, the default value is <code>default</code>. The only valid value is <code>default</code>.</p>
    pub fn policy_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.policy_name(input.into());
        self
    }
    /// <p>The name of the key policy. If no policy name is specified, the default value is <code>default</code>. The only valid value is <code>default</code>.</p>
    pub fn set_policy_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_policy_name(input);
        self
    }
    /// <p>The name of the key policy. If no policy name is specified, the default value is <code>default</code>. The only valid value is <code>default</code>.</p>
    pub fn get_policy_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_policy_name()
    }
    /// <p>The key policy to attach to the KMS key.</p>
    /// <p>The key policy must meet the following criteria:</p>
    /// <ul>
    /// <li>
    /// <p>The key policy must allow the calling principal to make a subsequent <code>PutKeyPolicy</code> request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-default.html#prevent-unmanageable-key">Default key policy</a> in the <i>Key Management Service Developer Guide</i>. (To omit this condition, set <code>BypassPolicyLockoutSafetyCheck</code> to true.)</p></li>
    /// <li>
    /// <p>Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal, you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/troubleshoot_general.html#troubleshoot_general_eventual-consistency">Changes that I make are not always immediately visible</a> in the <i>Amazon Web Services Identity and Access Management User Guide</i>.</p></li>
    /// </ul>
    /// <p>A key policy document can include only the following characters:</p>
    /// <ul>
    /// <li>
    /// <p>Printable ASCII characters from the space character (<code>\u0020</code>) through the end of the ASCII character range.</p></li>
    /// <li>
    /// <p>Printable characters in the Basic Latin and Latin-1 Supplement character set (through <code>\u00FF</code>).</p></li>
    /// <li>
    /// <p>The tab (<code>\u0009</code>), line feed (<code>\u000A</code>), and carriage return (<code>\u000D</code>) special characters</p></li>
    /// </ul>
    /// <p>For information about key policies, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policies.html">Key policies in KMS</a> in the <i>Key Management Service Developer Guide</i>.For help writing and formatting a JSON policy document, see the <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies.html">IAM JSON Policy Reference</a> in the <i> <i>Identity and Access Management User Guide</i> </i>.</p>
    pub fn policy(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.policy(input.into());
        self
    }
    /// <p>The key policy to attach to the KMS key.</p>
    /// <p>The key policy must meet the following criteria:</p>
    /// <ul>
    /// <li>
    /// <p>The key policy must allow the calling principal to make a subsequent <code>PutKeyPolicy</code> request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-default.html#prevent-unmanageable-key">Default key policy</a> in the <i>Key Management Service Developer Guide</i>. (To omit this condition, set <code>BypassPolicyLockoutSafetyCheck</code> to true.)</p></li>
    /// <li>
    /// <p>Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal, you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/troubleshoot_general.html#troubleshoot_general_eventual-consistency">Changes that I make are not always immediately visible</a> in the <i>Amazon Web Services Identity and Access Management User Guide</i>.</p></li>
    /// </ul>
    /// <p>A key policy document can include only the following characters:</p>
    /// <ul>
    /// <li>
    /// <p>Printable ASCII characters from the space character (<code>\u0020</code>) through the end of the ASCII character range.</p></li>
    /// <li>
    /// <p>Printable characters in the Basic Latin and Latin-1 Supplement character set (through <code>\u00FF</code>).</p></li>
    /// <li>
    /// <p>The tab (<code>\u0009</code>), line feed (<code>\u000A</code>), and carriage return (<code>\u000D</code>) special characters</p></li>
    /// </ul>
    /// <p>For information about key policies, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policies.html">Key policies in KMS</a> in the <i>Key Management Service Developer Guide</i>.For help writing and formatting a JSON policy document, see the <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies.html">IAM JSON Policy Reference</a> in the <i> <i>Identity and Access Management User Guide</i> </i>.</p>
    pub fn set_policy(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_policy(input);
        self
    }
    /// <p>The key policy to attach to the KMS key.</p>
    /// <p>The key policy must meet the following criteria:</p>
    /// <ul>
    /// <li>
    /// <p>The key policy must allow the calling principal to make a subsequent <code>PutKeyPolicy</code> request on the KMS key. This reduces the risk that the KMS key becomes unmanageable. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-default.html#prevent-unmanageable-key">Default key policy</a> in the <i>Key Management Service Developer Guide</i>. (To omit this condition, set <code>BypassPolicyLockoutSafetyCheck</code> to true.)</p></li>
    /// <li>
    /// <p>Each statement in the key policy must contain one or more principals. The principals in the key policy must exist and be visible to KMS. When you create a new Amazon Web Services principal, you might need to enforce a delay before including the new principal in a key policy because the new principal might not be immediately visible to KMS. For more information, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/troubleshoot_general.html#troubleshoot_general_eventual-consistency">Changes that I make are not always immediately visible</a> in the <i>Amazon Web Services Identity and Access Management User Guide</i>.</p></li>
    /// </ul>
    /// <p>A key policy document can include only the following characters:</p>
    /// <ul>
    /// <li>
    /// <p>Printable ASCII characters from the space character (<code>\u0020</code>) through the end of the ASCII character range.</p></li>
    /// <li>
    /// <p>Printable characters in the Basic Latin and Latin-1 Supplement character set (through <code>\u00FF</code>).</p></li>
    /// <li>
    /// <p>The tab (<code>\u0009</code>), line feed (<code>\u000A</code>), and carriage return (<code>\u000D</code>) special characters</p></li>
    /// </ul>
    /// <p>For information about key policies, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policies.html">Key policies in KMS</a> in the <i>Key Management Service Developer Guide</i>.For help writing and formatting a JSON policy document, see the <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies.html">IAM JSON Policy Reference</a> in the <i> <i>Identity and Access Management User Guide</i> </i>.</p>
    pub fn get_policy(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_policy()
    }
    /// <p>Skips ("bypasses") the key policy lockout safety check. The default value is false.</p><important>
    /// <p>Setting this value to true increases the risk that the KMS key becomes unmanageable. Do not set this value to true indiscriminately.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-default.html#prevent-unmanageable-key">Default key policy</a> in the <i>Key Management Service Developer Guide</i>.</p>
    /// </important>
    /// <p>Use this parameter only when you intend to prevent the principal that is making the request from making a subsequent <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_PutKeyPolicy.html">PutKeyPolicy</a> request on the KMS key.</p>
    pub fn bypass_policy_lockout_safety_check(mut self, input: bool) -> Self {
        self.inner = self.inner.bypass_policy_lockout_safety_check(input);
        self
    }
    /// <p>Skips ("bypasses") the key policy lockout safety check. The default value is false.</p><important>
    /// <p>Setting this value to true increases the risk that the KMS key becomes unmanageable. Do not set this value to true indiscriminately.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-default.html#prevent-unmanageable-key">Default key policy</a> in the <i>Key Management Service Developer Guide</i>.</p>
    /// </important>
    /// <p>Use this parameter only when you intend to prevent the principal that is making the request from making a subsequent <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_PutKeyPolicy.html">PutKeyPolicy</a> request on the KMS key.</p>
    pub fn set_bypass_policy_lockout_safety_check(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_bypass_policy_lockout_safety_check(input);
        self
    }
    /// <p>Skips ("bypasses") the key policy lockout safety check. The default value is false.</p><important>
    /// <p>Setting this value to true increases the risk that the KMS key becomes unmanageable. Do not set this value to true indiscriminately.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/key-policy-default.html#prevent-unmanageable-key">Default key policy</a> in the <i>Key Management Service Developer Guide</i>.</p>
    /// </important>
    /// <p>Use this parameter only when you intend to prevent the principal that is making the request from making a subsequent <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_PutKeyPolicy.html">PutKeyPolicy</a> request on the KMS key.</p>
    pub fn get_bypass_policy_lockout_safety_check(&self) -> &::std::option::Option<bool> {
        self.inner.get_bypass_policy_lockout_safety_check()
    }
}