aws_sdk_kms/operation/verify/

_verify_input.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq)]
pub struct VerifyInput {
    /// <p>Identifies the asymmetric KMS key that will be used to verify the signature. This must be the same KMS key that was used to generate the signature. If you specify a different KMS key, the signature verification fails.</p>
    /// <p>To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with <code>"alias/"</code>. To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Alias name: <code>alias/ExampleAlias</code></p></li>
    /// <li>
    /// <p>Alias ARN: <code>arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>. To get the alias name and alias ARN, use <code>ListAliases</code>.</p>
    pub key_id: ::std::option::Option<::std::string::String>,
    /// <p>Specifies the message that was signed. You can submit a raw message of up to 4096 bytes, or a hash digest of the message. If you submit a digest, use the <code>MessageType</code> parameter with a value of <code>DIGEST</code>.</p>
    /// <p>If the message specified here is different from the message that was signed, the signature verification fails. A message and its hash digest are considered to be the same message.</p>
    pub message: ::std::option::Option<::aws_smithy_types::Blob>,
    /// <p>Tells KMS whether the value of the <code>Message</code> parameter should be hashed as part of the signing algorithm. Use <code>RAW</code> for unhashed messages; use <code>DIGEST</code> for message digests, which are already hashed.</p>
    /// <p>When the value of <code>MessageType</code> is <code>RAW</code>, KMS uses the standard signing algorithm, which begins with a hash function. When the value is <code>DIGEST</code>, KMS skips the hashing step in the signing algorithm.</p><important>
    /// <p>Use the <code>DIGEST</code> value only when the value of the <code>Message</code> parameter is a message digest. If you use the <code>DIGEST</code> value with an unhashed message, the security of the verification operation can be compromised.</p>
    /// </important>
    /// <p>When the value of <code>MessageType</code>is <code>DIGEST</code>, the length of the <code>Message</code> value must match the length of hashed messages for the specified signing algorithm.</p>
    /// <p>You can submit a message digest and omit the <code>MessageType</code> or specify <code>RAW</code> so the digest is hashed again while signing. However, if the signed message is hashed once while signing, but twice while verifying, verification fails, even when the message hasn't changed.</p>
    /// <p>The hashing algorithm in that <code>Verify</code> uses is based on the <code>SigningAlgorithm</code> value.</p>
    /// <ul>
    /// <li>
    /// <p>Signing algorithms that end in SHA_256 use the SHA_256 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_384 use the SHA_384 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_512 use the SHA_512 hashing algorithm.</p></li>
    /// <li>
    /// <p>SM2DSA uses the SM3 hashing algorithm. For details, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/asymmetric-key-specs.html#key-spec-sm-offline-verification">Offline verification with SM2 key pairs</a>.</p></li>
    /// </ul>
    pub message_type: ::std::option::Option<crate::types::MessageType>,
    /// <p>The signature that the <code>Sign</code> operation generated.</p>
    pub signature: ::std::option::Option<::aws_smithy_types::Blob>,
    /// <p>The signing algorithm that was used to sign the message. If you submit a different algorithm, the signature verification fails.</p>
    pub signing_algorithm: ::std::option::Option<crate::types::SigningAlgorithmSpec>,
    /// <p>A list of grant tokens.</p>
    /// <p>Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved <i>eventual consistency</i>. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grants.html#grant_token">Grant token</a> and <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grant-manage.html#using-grant-token">Using a grant token</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub grant_tokens: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    /// <p>Checks if your request will succeed. <code>DryRun</code> is an optional parameter.</p>
    /// <p>To learn more about how to use this parameter, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-dryrun.html">Testing your KMS API calls</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub dry_run: ::std::option::Option<bool>,
}
impl VerifyInput {
    /// <p>Identifies the asymmetric KMS key that will be used to verify the signature. This must be the same KMS key that was used to generate the signature. If you specify a different KMS key, the signature verification fails.</p>
    /// <p>To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with <code>"alias/"</code>. To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Alias name: <code>alias/ExampleAlias</code></p></li>
    /// <li>
    /// <p>Alias ARN: <code>arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>. To get the alias name and alias ARN, use <code>ListAliases</code>.</p>
    pub fn key_id(&self) -> ::std::option::Option<&str> {
        self.key_id.as_deref()
    }
    /// <p>Specifies the message that was signed. You can submit a raw message of up to 4096 bytes, or a hash digest of the message. If you submit a digest, use the <code>MessageType</code> parameter with a value of <code>DIGEST</code>.</p>
    /// <p>If the message specified here is different from the message that was signed, the signature verification fails. A message and its hash digest are considered to be the same message.</p>
    pub fn message(&self) -> ::std::option::Option<&::aws_smithy_types::Blob> {
        self.message.as_ref()
    }
    /// <p>Tells KMS whether the value of the <code>Message</code> parameter should be hashed as part of the signing algorithm. Use <code>RAW</code> for unhashed messages; use <code>DIGEST</code> for message digests, which are already hashed.</p>
    /// <p>When the value of <code>MessageType</code> is <code>RAW</code>, KMS uses the standard signing algorithm, which begins with a hash function. When the value is <code>DIGEST</code>, KMS skips the hashing step in the signing algorithm.</p><important>
    /// <p>Use the <code>DIGEST</code> value only when the value of the <code>Message</code> parameter is a message digest. If you use the <code>DIGEST</code> value with an unhashed message, the security of the verification operation can be compromised.</p>
    /// </important>
    /// <p>When the value of <code>MessageType</code>is <code>DIGEST</code>, the length of the <code>Message</code> value must match the length of hashed messages for the specified signing algorithm.</p>
    /// <p>You can submit a message digest and omit the <code>MessageType</code> or specify <code>RAW</code> so the digest is hashed again while signing. However, if the signed message is hashed once while signing, but twice while verifying, verification fails, even when the message hasn't changed.</p>
    /// <p>The hashing algorithm in that <code>Verify</code> uses is based on the <code>SigningAlgorithm</code> value.</p>
    /// <ul>
    /// <li>
    /// <p>Signing algorithms that end in SHA_256 use the SHA_256 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_384 use the SHA_384 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_512 use the SHA_512 hashing algorithm.</p></li>
    /// <li>
    /// <p>SM2DSA uses the SM3 hashing algorithm. For details, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/asymmetric-key-specs.html#key-spec-sm-offline-verification">Offline verification with SM2 key pairs</a>.</p></li>
    /// </ul>
    pub fn message_type(&self) -> ::std::option::Option<&crate::types::MessageType> {
        self.message_type.as_ref()
    }
    /// <p>The signature that the <code>Sign</code> operation generated.</p>
    pub fn signature(&self) -> ::std::option::Option<&::aws_smithy_types::Blob> {
        self.signature.as_ref()
    }
    /// <p>The signing algorithm that was used to sign the message. If you submit a different algorithm, the signature verification fails.</p>
    pub fn signing_algorithm(&self) -> ::std::option::Option<&crate::types::SigningAlgorithmSpec> {
        self.signing_algorithm.as_ref()
    }
    /// <p>A list of grant tokens.</p>
    /// <p>Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved <i>eventual consistency</i>. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grants.html#grant_token">Grant token</a> and <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grant-manage.html#using-grant-token">Using a grant token</a> in the <i>Key Management Service Developer Guide</i>.</p>
    ///
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.grant_tokens.is_none()`.
    pub fn grant_tokens(&self) -> &[::std::string::String] {
        self.grant_tokens.as_deref().unwrap_or_default()
    }
    /// <p>Checks if your request will succeed. <code>DryRun</code> is an optional parameter.</p>
    /// <p>To learn more about how to use this parameter, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-dryrun.html">Testing your KMS API calls</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn dry_run(&self) -> ::std::option::Option<bool> {
        self.dry_run
    }
}
impl ::std::fmt::Debug for VerifyInput {
    fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
        let mut formatter = f.debug_struct("VerifyInput");
        formatter.field("key_id", &self.key_id);
        formatter.field("message", &"*** Sensitive Data Redacted ***");
        formatter.field("message_type", &self.message_type);
        formatter.field("signature", &self.signature);
        formatter.field("signing_algorithm", &self.signing_algorithm);
        formatter.field("grant_tokens", &self.grant_tokens);
        formatter.field("dry_run", &self.dry_run);
        formatter.finish()
    }
}
impl VerifyInput {
    /// Creates a new builder-style object to manufacture [`VerifyInput`](crate::operation::verify::VerifyInput).
    pub fn builder() -> crate::operation::verify::builders::VerifyInputBuilder {
        crate::operation::verify::builders::VerifyInputBuilder::default()
    }
}

/// A builder for [`VerifyInput`](crate::operation::verify::VerifyInput).
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default)]
#[non_exhaustive]
pub struct VerifyInputBuilder {
    pub(crate) key_id: ::std::option::Option<::std::string::String>,
    pub(crate) message: ::std::option::Option<::aws_smithy_types::Blob>,
    pub(crate) message_type: ::std::option::Option<crate::types::MessageType>,
    pub(crate) signature: ::std::option::Option<::aws_smithy_types::Blob>,
    pub(crate) signing_algorithm: ::std::option::Option<crate::types::SigningAlgorithmSpec>,
    pub(crate) grant_tokens: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    pub(crate) dry_run: ::std::option::Option<bool>,
}
impl VerifyInputBuilder {
    /// <p>Identifies the asymmetric KMS key that will be used to verify the signature. This must be the same KMS key that was used to generate the signature. If you specify a different KMS key, the signature verification fails.</p>
    /// <p>To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with <code>"alias/"</code>. To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Alias name: <code>alias/ExampleAlias</code></p></li>
    /// <li>
    /// <p>Alias ARN: <code>arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>. To get the alias name and alias ARN, use <code>ListAliases</code>.</p>
    /// This field is required.
    pub fn key_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.key_id = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Identifies the asymmetric KMS key that will be used to verify the signature. This must be the same KMS key that was used to generate the signature. If you specify a different KMS key, the signature verification fails.</p>
    /// <p>To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with <code>"alias/"</code>. To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Alias name: <code>alias/ExampleAlias</code></p></li>
    /// <li>
    /// <p>Alias ARN: <code>arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>. To get the alias name and alias ARN, use <code>ListAliases</code>.</p>
    pub fn set_key_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.key_id = input;
        self
    }
    /// <p>Identifies the asymmetric KMS key that will be used to verify the signature. This must be the same KMS key that was used to generate the signature. If you specify a different KMS key, the signature verification fails.</p>
    /// <p>To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with <code>"alias/"</code>. To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.</p>
    /// <p>For example:</p>
    /// <ul>
    /// <li>
    /// <p>Key ID: <code>1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Key ARN: <code>arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code></p></li>
    /// <li>
    /// <p>Alias name: <code>alias/ExampleAlias</code></p></li>
    /// <li>
    /// <p>Alias ARN: <code>arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias</code></p></li>
    /// </ul>
    /// <p>To get the key ID and key ARN for a KMS key, use <code>ListKeys</code> or <code>DescribeKey</code>. To get the alias name and alias ARN, use <code>ListAliases</code>.</p>
    pub fn get_key_id(&self) -> &::std::option::Option<::std::string::String> {
        &self.key_id
    }
    /// <p>Specifies the message that was signed. You can submit a raw message of up to 4096 bytes, or a hash digest of the message. If you submit a digest, use the <code>MessageType</code> parameter with a value of <code>DIGEST</code>.</p>
    /// <p>If the message specified here is different from the message that was signed, the signature verification fails. A message and its hash digest are considered to be the same message.</p>
    /// This field is required.
    pub fn message(mut self, input: ::aws_smithy_types::Blob) -> Self {
        self.message = ::std::option::Option::Some(input);
        self
    }
    /// <p>Specifies the message that was signed. You can submit a raw message of up to 4096 bytes, or a hash digest of the message. If you submit a digest, use the <code>MessageType</code> parameter with a value of <code>DIGEST</code>.</p>
    /// <p>If the message specified here is different from the message that was signed, the signature verification fails. A message and its hash digest are considered to be the same message.</p>
    pub fn set_message(mut self, input: ::std::option::Option<::aws_smithy_types::Blob>) -> Self {
        self.message = input;
        self
    }
    /// <p>Specifies the message that was signed. You can submit a raw message of up to 4096 bytes, or a hash digest of the message. If you submit a digest, use the <code>MessageType</code> parameter with a value of <code>DIGEST</code>.</p>
    /// <p>If the message specified here is different from the message that was signed, the signature verification fails. A message and its hash digest are considered to be the same message.</p>
    pub fn get_message(&self) -> &::std::option::Option<::aws_smithy_types::Blob> {
        &self.message
    }
    /// <p>Tells KMS whether the value of the <code>Message</code> parameter should be hashed as part of the signing algorithm. Use <code>RAW</code> for unhashed messages; use <code>DIGEST</code> for message digests, which are already hashed.</p>
    /// <p>When the value of <code>MessageType</code> is <code>RAW</code>, KMS uses the standard signing algorithm, which begins with a hash function. When the value is <code>DIGEST</code>, KMS skips the hashing step in the signing algorithm.</p><important>
    /// <p>Use the <code>DIGEST</code> value only when the value of the <code>Message</code> parameter is a message digest. If you use the <code>DIGEST</code> value with an unhashed message, the security of the verification operation can be compromised.</p>
    /// </important>
    /// <p>When the value of <code>MessageType</code>is <code>DIGEST</code>, the length of the <code>Message</code> value must match the length of hashed messages for the specified signing algorithm.</p>
    /// <p>You can submit a message digest and omit the <code>MessageType</code> or specify <code>RAW</code> so the digest is hashed again while signing. However, if the signed message is hashed once while signing, but twice while verifying, verification fails, even when the message hasn't changed.</p>
    /// <p>The hashing algorithm in that <code>Verify</code> uses is based on the <code>SigningAlgorithm</code> value.</p>
    /// <ul>
    /// <li>
    /// <p>Signing algorithms that end in SHA_256 use the SHA_256 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_384 use the SHA_384 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_512 use the SHA_512 hashing algorithm.</p></li>
    /// <li>
    /// <p>SM2DSA uses the SM3 hashing algorithm. For details, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/asymmetric-key-specs.html#key-spec-sm-offline-verification">Offline verification with SM2 key pairs</a>.</p></li>
    /// </ul>
    pub fn message_type(mut self, input: crate::types::MessageType) -> Self {
        self.message_type = ::std::option::Option::Some(input);
        self
    }
    /// <p>Tells KMS whether the value of the <code>Message</code> parameter should be hashed as part of the signing algorithm. Use <code>RAW</code> for unhashed messages; use <code>DIGEST</code> for message digests, which are already hashed.</p>
    /// <p>When the value of <code>MessageType</code> is <code>RAW</code>, KMS uses the standard signing algorithm, which begins with a hash function. When the value is <code>DIGEST</code>, KMS skips the hashing step in the signing algorithm.</p><important>
    /// <p>Use the <code>DIGEST</code> value only when the value of the <code>Message</code> parameter is a message digest. If you use the <code>DIGEST</code> value with an unhashed message, the security of the verification operation can be compromised.</p>
    /// </important>
    /// <p>When the value of <code>MessageType</code>is <code>DIGEST</code>, the length of the <code>Message</code> value must match the length of hashed messages for the specified signing algorithm.</p>
    /// <p>You can submit a message digest and omit the <code>MessageType</code> or specify <code>RAW</code> so the digest is hashed again while signing. However, if the signed message is hashed once while signing, but twice while verifying, verification fails, even when the message hasn't changed.</p>
    /// <p>The hashing algorithm in that <code>Verify</code> uses is based on the <code>SigningAlgorithm</code> value.</p>
    /// <ul>
    /// <li>
    /// <p>Signing algorithms that end in SHA_256 use the SHA_256 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_384 use the SHA_384 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_512 use the SHA_512 hashing algorithm.</p></li>
    /// <li>
    /// <p>SM2DSA uses the SM3 hashing algorithm. For details, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/asymmetric-key-specs.html#key-spec-sm-offline-verification">Offline verification with SM2 key pairs</a>.</p></li>
    /// </ul>
    pub fn set_message_type(mut self, input: ::std::option::Option<crate::types::MessageType>) -> Self {
        self.message_type = input;
        self
    }
    /// <p>Tells KMS whether the value of the <code>Message</code> parameter should be hashed as part of the signing algorithm. Use <code>RAW</code> for unhashed messages; use <code>DIGEST</code> for message digests, which are already hashed.</p>
    /// <p>When the value of <code>MessageType</code> is <code>RAW</code>, KMS uses the standard signing algorithm, which begins with a hash function. When the value is <code>DIGEST</code>, KMS skips the hashing step in the signing algorithm.</p><important>
    /// <p>Use the <code>DIGEST</code> value only when the value of the <code>Message</code> parameter is a message digest. If you use the <code>DIGEST</code> value with an unhashed message, the security of the verification operation can be compromised.</p>
    /// </important>
    /// <p>When the value of <code>MessageType</code>is <code>DIGEST</code>, the length of the <code>Message</code> value must match the length of hashed messages for the specified signing algorithm.</p>
    /// <p>You can submit a message digest and omit the <code>MessageType</code> or specify <code>RAW</code> so the digest is hashed again while signing. However, if the signed message is hashed once while signing, but twice while verifying, verification fails, even when the message hasn't changed.</p>
    /// <p>The hashing algorithm in that <code>Verify</code> uses is based on the <code>SigningAlgorithm</code> value.</p>
    /// <ul>
    /// <li>
    /// <p>Signing algorithms that end in SHA_256 use the SHA_256 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_384 use the SHA_384 hashing algorithm.</p></li>
    /// <li>
    /// <p>Signing algorithms that end in SHA_512 use the SHA_512 hashing algorithm.</p></li>
    /// <li>
    /// <p>SM2DSA uses the SM3 hashing algorithm. For details, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/asymmetric-key-specs.html#key-spec-sm-offline-verification">Offline verification with SM2 key pairs</a>.</p></li>
    /// </ul>
    pub fn get_message_type(&self) -> &::std::option::Option<crate::types::MessageType> {
        &self.message_type
    }
    /// <p>The signature that the <code>Sign</code> operation generated.</p>
    /// This field is required.
    pub fn signature(mut self, input: ::aws_smithy_types::Blob) -> Self {
        self.signature = ::std::option::Option::Some(input);
        self
    }
    /// <p>The signature that the <code>Sign</code> operation generated.</p>
    pub fn set_signature(mut self, input: ::std::option::Option<::aws_smithy_types::Blob>) -> Self {
        self.signature = input;
        self
    }
    /// <p>The signature that the <code>Sign</code> operation generated.</p>
    pub fn get_signature(&self) -> &::std::option::Option<::aws_smithy_types::Blob> {
        &self.signature
    }
    /// <p>The signing algorithm that was used to sign the message. If you submit a different algorithm, the signature verification fails.</p>
    /// This field is required.
    pub fn signing_algorithm(mut self, input: crate::types::SigningAlgorithmSpec) -> Self {
        self.signing_algorithm = ::std::option::Option::Some(input);
        self
    }
    /// <p>The signing algorithm that was used to sign the message. If you submit a different algorithm, the signature verification fails.</p>
    pub fn set_signing_algorithm(mut self, input: ::std::option::Option<crate::types::SigningAlgorithmSpec>) -> Self {
        self.signing_algorithm = input;
        self
    }
    /// <p>The signing algorithm that was used to sign the message. If you submit a different algorithm, the signature verification fails.</p>
    pub fn get_signing_algorithm(&self) -> &::std::option::Option<crate::types::SigningAlgorithmSpec> {
        &self.signing_algorithm
    }
    /// Appends an item to `grant_tokens`.
    ///
    /// To override the contents of this collection use [`set_grant_tokens`](Self::set_grant_tokens).
    ///
    /// <p>A list of grant tokens.</p>
    /// <p>Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved <i>eventual consistency</i>. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grants.html#grant_token">Grant token</a> and <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grant-manage.html#using-grant-token">Using a grant token</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn grant_tokens(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        let mut v = self.grant_tokens.unwrap_or_default();
        v.push(input.into());
        self.grant_tokens = ::std::option::Option::Some(v);
        self
    }
    /// <p>A list of grant tokens.</p>
    /// <p>Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved <i>eventual consistency</i>. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grants.html#grant_token">Grant token</a> and <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grant-manage.html#using-grant-token">Using a grant token</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn set_grant_tokens(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.grant_tokens = input;
        self
    }
    /// <p>A list of grant tokens.</p>
    /// <p>Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved <i>eventual consistency</i>. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grants.html#grant_token">Grant token</a> and <a href="https://docs.aws.amazon.com/kms/latest/developerguide/grant-manage.html#using-grant-token">Using a grant token</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn get_grant_tokens(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        &self.grant_tokens
    }
    /// <p>Checks if your request will succeed. <code>DryRun</code> is an optional parameter.</p>
    /// <p>To learn more about how to use this parameter, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-dryrun.html">Testing your KMS API calls</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn dry_run(mut self, input: bool) -> Self {
        self.dry_run = ::std::option::Option::Some(input);
        self
    }
    /// <p>Checks if your request will succeed. <code>DryRun</code> is an optional parameter.</p>
    /// <p>To learn more about how to use this parameter, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-dryrun.html">Testing your KMS API calls</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
        self.dry_run = input;
        self
    }
    /// <p>Checks if your request will succeed. <code>DryRun</code> is an optional parameter.</p>
    /// <p>To learn more about how to use this parameter, see <a href="https://docs.aws.amazon.com/kms/latest/developerguide/programming-dryrun.html">Testing your KMS API calls</a> in the <i>Key Management Service Developer Guide</i>.</p>
    pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
        &self.dry_run
    }
    /// Consumes the builder and constructs a [`VerifyInput`](crate::operation::verify::VerifyInput).
    pub fn build(self) -> ::std::result::Result<crate::operation::verify::VerifyInput, ::aws_smithy_types::error::operation::BuildError> {
        ::std::result::Result::Ok(crate::operation::verify::VerifyInput {
            key_id: self.key_id,
            message: self.message,
            message_type: self.message_type,
            signature: self.signature,
            signing_algorithm: self.signing_algorithm,
            grant_tokens: self.grant_tokens,
            dry_run: self.dry_run,
        })
    }
}
impl ::std::fmt::Debug for VerifyInputBuilder {
    fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
        let mut formatter = f.debug_struct("VerifyInputBuilder");
        formatter.field("key_id", &self.key_id);
        formatter.field("message", &"*** Sensitive Data Redacted ***");
        formatter.field("message_type", &self.message_type);
        formatter.field("signature", &self.signature);
        formatter.field("signing_algorithm", &self.signing_algorithm);
        formatter.field("grant_tokens", &self.grant_tokens);
        formatter.field("dry_run", &self.dry_run);
        formatter.finish()
    }
}