// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::complete_multipart_upload::_complete_multipart_upload_output::CompleteMultipartUploadOutputBuilder;

pub use crate::operation::complete_multipart_upload::_complete_multipart_upload_input::CompleteMultipartUploadInputBuilder;

impl CompleteMultipartUploadInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::complete_multipart_upload::CompleteMultipartUploadOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::complete_multipart_upload::CompleteMultipartUploadError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.complete_multipart_upload();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `CompleteMultipartUpload`.
///
/// <p>Completes a multipart upload by assembling previously uploaded parts.</p>
/// <p>You first initiate the multipart upload and then upload all parts using the <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPart.html">UploadPart</a> operation. After successfully uploading all relevant parts of an upload, you call this action to complete the upload. Upon receiving this request, Amazon S3 concatenates all the parts in ascending order by part number to create a new object. In the Complete Multipart Upload request, you must provide the parts list. You must ensure that the parts list is complete. This action concatenates the parts that you provide in the list. For each part in the list, you must provide the part number and the <code>ETag</code> value, returned after that part was uploaded.</p>
/// <p>Processing of a Complete Multipart Upload request could take several minutes to complete. After Amazon S3 begins processing the request, it sends an HTTP response header that specifies a 200 OK response. While processing is in progress, Amazon S3 periodically sends white space characters to keep the connection from timing out. A request could fail after the initial 200 OK response has been sent. This means that a <code>200 OK</code> response can contain either a success or an error. If you call the S3 API directly, make sure to design your application to parse the contents of the response and handle it appropriately. If you use Amazon Web Services SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throws an exception (or, for the SDKs that don't use exceptions, they return the error). </p>
/// <p>Note that if <code>CompleteMultipartUpload</code> fails, applications should be prepared to retry the failed requests. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ErrorBestPractices.html">Amazon S3 Error Best Practices</a>.</p> <important>
/// <p>You cannot use <code>Content-Type: application/x-www-form-urlencoded</code> with Complete Multipart Upload requests. Also, if you do not provide a <code>Content-Type</code> header, <code>CompleteMultipartUpload</code> returns a 200 OK response.</p>
/// </important>
/// <p>For more information about multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/uploadobjusingmpu.html">Uploading Objects Using Multipart Upload</a>.</p>
/// <p>For information about permissions required to use the multipart upload API, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html">Multipart Upload and Permissions</a>.</p>
/// <p> <code>CompleteMultipartUpload</code> has the following special errors:</p>
/// <ul>
/// <li> <p>Error code: <code>EntityTooSmall</code> </p>
/// <ul>
/// <li> <p>Description: Your proposed upload is smaller than the minimum allowed object size. Each part must be at least 5 MB in size, except the last part.</p> </li>
/// <li> <p>400 Bad Request</p> </li>
/// </ul> </li>
/// <li> <p>Error code: <code>InvalidPart</code> </p>
/// <ul>
/// <li> <p>Description: One or more of the specified parts could not be found. The part might not have been uploaded, or the specified entity tag might not have matched the part's entity tag.</p> </li>
/// <li> <p>400 Bad Request</p> </li>
/// </ul> </li>
/// <li> <p>Error code: <code>InvalidPartOrder</code> </p>
/// <ul>
/// <li> <p>Description: The list of parts was not in ascending order. The parts list must be specified in order by part number.</p> </li>
/// <li> <p>400 Bad Request</p> </li>
/// </ul> </li>
/// <li> <p>Error code: <code>NoSuchUpload</code> </p>
/// <ul>
/// <li> <p>Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.</p> </li>
/// <li> <p>404 Not Found</p> </li>
/// </ul> </li>
/// </ul>
/// <p>The following operations are related to <code>CompleteMultipartUpload</code>:</p>
/// <ul>
/// <li> <p> <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateMultipartUpload.html">CreateMultipartUpload</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPart.html">UploadPart</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_AbortMultipartUpload.html">AbortMultipartUpload</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListParts.html">ListParts</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListMultipartUploads.html">ListMultipartUploads</a> </p> </li>
/// </ul>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct CompleteMultipartUploadFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::complete_multipart_upload::CompleteMultipartUploadOutput,
        crate::operation::complete_multipart_upload::CompleteMultipartUploadError,
    > for CompleteMultipartUploadFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::complete_multipart_upload::CompleteMultipartUploadOutput,
            crate::operation::complete_multipart_upload::CompleteMultipartUploadError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl CompleteMultipartUploadFluentBuilder {
    /// Creates a new `CompleteMultipartUpload`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the CompleteMultipartUpload as a reference.
    pub fn as_input(&self) -> &crate::operation::complete_multipart_upload::builders::CompleteMultipartUploadInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::complete_multipart_upload::CompleteMultipartUploadOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::complete_multipart_upload::CompleteMultipartUploadError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::complete_multipart_upload::CompleteMultipartUpload::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::complete_multipart_upload::CompleteMultipartUpload::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::complete_multipart_upload::CompleteMultipartUploadOutput,
        crate::operation::complete_multipart_upload::CompleteMultipartUploadError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>Name of the bucket to which the multipart upload was initiated.</p>
    /// <p>When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn bucket(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.bucket(input.into());
        self
    }
    /// <p>Name of the bucket to which the multipart upload was initiated.</p>
    /// <p>When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_bucket(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_bucket(input);
        self
    }
    /// <p>Name of the bucket to which the multipart upload was initiated.</p>
    /// <p>When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_bucket(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_bucket()
    }
    /// <p>Object key for which the multipart upload was initiated.</p>
    pub fn key(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.key(input.into());
        self
    }
    /// <p>Object key for which the multipart upload was initiated.</p>
    pub fn set_key(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_key(input);
        self
    }
    /// <p>Object key for which the multipart upload was initiated.</p>
    pub fn get_key(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_key()
    }
    /// <p>The container for the multipart upload request information.</p>
    pub fn multipart_upload(mut self, input: crate::types::CompletedMultipartUpload) -> Self {
        self.inner = self.inner.multipart_upload(input);
        self
    }
    /// <p>The container for the multipart upload request information.</p>
    pub fn set_multipart_upload(mut self, input: ::std::option::Option<crate::types::CompletedMultipartUpload>) -> Self {
        self.inner = self.inner.set_multipart_upload(input);
        self
    }
    /// <p>The container for the multipart upload request information.</p>
    pub fn get_multipart_upload(&self) -> &::std::option::Option<crate::types::CompletedMultipartUpload> {
        self.inner.get_multipart_upload()
    }
    /// <p>ID for the initiated multipart upload.</p>
    pub fn upload_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.upload_id(input.into());
        self
    }
    /// <p>ID for the initiated multipart upload.</p>
    pub fn set_upload_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_upload_id(input);
        self
    }
    /// <p>ID for the initiated multipart upload.</p>
    pub fn get_upload_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_upload_id()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_crc32(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_crc32(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_crc32(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_crc32(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_crc32(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_crc32()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_crc32_c(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_crc32_c(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_crc32_c(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_crc32_c(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_crc32_c(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_crc32_c()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_sha1(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_sha1(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_sha1(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_sha1(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_sha1(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_sha1()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_sha256(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_sha256(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_sha256(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_sha256(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_sha256(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_sha256()
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn request_payer(mut self, input: crate::types::RequestPayer) -> Self {
        self.inner = self.inner.request_payer(input);
        self
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_request_payer(mut self, input: ::std::option::Option<crate::types::RequestPayer>) -> Self {
        self.inner = self.inner.set_request_payer(input);
        self
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_request_payer(&self) -> &::std::option::Option<crate::types::RequestPayer> {
        self.inner.get_request_payer()
    }
    /// <p>The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn expected_bucket_owner(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.expected_bucket_owner(input.into());
        self
    }
    /// <p>The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn set_expected_bucket_owner(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_expected_bucket_owner(input);
        self
    }
    /// <p>The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn get_expected_bucket_owner(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_expected_bucket_owner()
    }
    /// <p>The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn sse_customer_algorithm(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.sse_customer_algorithm(input.into());
        self
    }
    /// <p>The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_sse_customer_algorithm(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_sse_customer_algorithm(input);
        self
    }
    /// <p>The server-side encryption (SSE) algorithm used to encrypt the object. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_sse_customer_algorithm(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_sse_customer_algorithm()
    }
    /// <p>The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn sse_customer_key(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.sse_customer_key(input.into());
        self
    }
    /// <p>The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_sse_customer_key(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_sse_customer_key(input);
        self
    }
    /// <p>The server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_sse_customer_key(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_sse_customer_key()
    }
    /// <p>The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn sse_customer_key_md5(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.sse_customer_key_md5(input.into());
        self
    }
    /// <p>The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_sse_customer_key_md5(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_sse_customer_key_md5(input);
        self
    }
    /// <p>The MD5 server-side encryption (SSE) customer managed key. This parameter is needed only when the object was created using a checksum algorithm. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ServerSideEncryptionCustomerKeys.html">Protecting data using SSE-C keys</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_sse_customer_key_md5(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_sse_customer_key_md5()
    }
}