#[non_exhaustive]pub struct CreateMultipartUploadOutput {Show 13 fields
pub abort_date: Option<DateTime>,
pub abort_rule_id: Option<String>,
pub bucket: Option<String>,
pub key: Option<String>,
pub upload_id: Option<String>,
pub server_side_encryption: Option<ServerSideEncryption>,
pub sse_customer_algorithm: Option<String>,
pub sse_customer_key_md5: Option<String>,
pub ssekms_key_id: Option<String>,
pub ssekms_encryption_context: Option<String>,
pub bucket_key_enabled: Option<bool>,
pub request_charged: Option<RequestCharged>,
pub checksum_algorithm: Option<ChecksumAlgorithm>,
/* private fields */
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.abort_date: Option<DateTime>If the bucket has a lifecycle rule configured with an action to abort incomplete multipart uploads and the prefix in the lifecycle rule matches the object name in the request, the response includes this header. The header indicates when the initiated multipart upload becomes eligible for an abort operation. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Configuration in the Amazon S3 User Guide.
The response also includes the x-amz-abort-rule-id header that provides the ID of the lifecycle configuration rule that defines the abort action.
This functionality is not supported for directory buckets.
abort_rule_id: Option<String>This header is returned along with the x-amz-abort-date header. It identifies the applicable lifecycle configuration rule that defines the action to abort incomplete multipart uploads.
This functionality is not supported for directory buckets.
bucket: Option<String>The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
key: Option<String>Object key for which the multipart upload was initiated.
upload_id: Option<String>ID for the initiated multipart upload.
server_side_encryption: Option<ServerSideEncryption>The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).
sse_customer_algorithm: Option<String>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.
This functionality is not supported for directory buckets.
sse_customer_key_md5: Option<String>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.
This functionality is not supported for directory buckets.
ssekms_key_id: Option<String>If present, indicates the ID of the KMS key that was used for object encryption.
ssekms_encryption_context: Option<String>If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs.
bucket_key_enabled: Option<bool>Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
request_charged: Option<RequestCharged>If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
checksum_algorithm: Option<ChecksumAlgorithm>The algorithm that was used to create a checksum of the object.
Implementations§
Source§impl CreateMultipartUploadOutput
impl CreateMultipartUploadOutput
Sourcepub fn abort_date(&self) -> Option<&DateTime>
pub fn abort_date(&self) -> Option<&DateTime>
If the bucket has a lifecycle rule configured with an action to abort incomplete multipart uploads and the prefix in the lifecycle rule matches the object name in the request, the response includes this header. The header indicates when the initiated multipart upload becomes eligible for an abort operation. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Configuration in the Amazon S3 User Guide.
The response also includes the x-amz-abort-rule-id header that provides the ID of the lifecycle configuration rule that defines the abort action.
This functionality is not supported for directory buckets.
Sourcepub fn abort_rule_id(&self) -> Option<&str>
pub fn abort_rule_id(&self) -> Option<&str>
This header is returned along with the x-amz-abort-date header. It identifies the applicable lifecycle configuration rule that defines the action to abort incomplete multipart uploads.
This functionality is not supported for directory buckets.
Sourcepub fn bucket(&self) -> Option<&str>
pub fn bucket(&self) -> Option<&str>
The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
Access points are not supported by directory buckets.
Sourcepub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>
pub fn server_side_encryption(&self) -> Option<&ServerSideEncryption>
The server-side encryption algorithm used when you store this object in Amazon S3 (for example, AES256, aws:kms).
Sourcepub fn sse_customer_algorithm(&self) -> Option<&str>
pub fn sse_customer_algorithm(&self) -> Option<&str>
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.
This functionality is not supported for directory buckets.
Sourcepub fn sse_customer_key_md5(&self) -> Option<&str>
pub fn sse_customer_key_md5(&self) -> Option<&str>
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.
This functionality is not supported for directory buckets.
Sourcepub fn ssekms_key_id(&self) -> Option<&str>
pub fn ssekms_key_id(&self) -> Option<&str>
If present, indicates the ID of the KMS key that was used for object encryption.
Sourcepub fn ssekms_encryption_context(&self) -> Option<&str>
pub fn ssekms_encryption_context(&self) -> Option<&str>
If present, indicates the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a Base64-encoded string of a UTF-8 encoded JSON, which contains the encryption context as key-value pairs.
Sourcepub fn bucket_key_enabled(&self) -> Option<bool>
pub fn bucket_key_enabled(&self) -> Option<bool>
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).
Sourcepub fn request_charged(&self) -> Option<&RequestCharged>
pub fn request_charged(&self) -> Option<&RequestCharged>
If present, indicates that the requester was successfully charged for the request.
This functionality is not supported for directory buckets.
Sourcepub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>
pub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>
The algorithm that was used to create a checksum of the object.
Source§impl CreateMultipartUploadOutput
impl CreateMultipartUploadOutput
Sourcepub fn builder() -> CreateMultipartUploadOutputBuilder
pub fn builder() -> CreateMultipartUploadOutputBuilder
Creates a new builder-style object to manufacture CreateMultipartUploadOutput.
Trait Implementations§
Source§impl Clone for CreateMultipartUploadOutput
impl Clone for CreateMultipartUploadOutput
Source§fn clone(&self) -> CreateMultipartUploadOutput
fn clone(&self) -> CreateMultipartUploadOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CreateMultipartUploadOutput
impl Debug for CreateMultipartUploadOutput
Source§impl RequestId for CreateMultipartUploadOutput
impl RequestId for CreateMultipartUploadOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None if the service could not be reached.Source§impl RequestIdExt for CreateMultipartUploadOutput
impl RequestIdExt for CreateMultipartUploadOutput
Source§fn extended_request_id(&self) -> Option<&str>
fn extended_request_id(&self) -> Option<&str>
impl StructuralPartialEq for CreateMultipartUploadOutput
Auto Trait Implementations§
impl Freeze for CreateMultipartUploadOutput
impl RefUnwindSafe for CreateMultipartUploadOutput
impl Send for CreateMultipartUploadOutput
impl Sync for CreateMultipartUploadOutput
impl Unpin for CreateMultipartUploadOutput
impl UnwindSafe for CreateMultipartUploadOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);