pub struct ListBucketsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ListBuckets.
This operation is not supported for directory buckets.
Returns a list of all buckets owned by the authenticated sender of the request. To grant IAM permission to use this operation, you must add the s3:ListAllMyBuckets policy action.
For information about Amazon S3 buckets, see Creating, configuring, and working with Amazon S3 buckets.
We strongly recommend using only paginated ListBuckets requests. Unpaginated ListBuckets requests are only supported for Amazon Web Services accounts set to the default general purpose bucket quota of 10,000. If you have an approved general purpose bucket quota above 10,000, you must send paginated ListBuckets requests to list your account’s buckets. All unpaginated ListBuckets requests will be rejected for Amazon Web Services accounts with a general purpose bucket quota greater than 10,000.
Implementations§
Source§impl ListBucketsFluentBuilder
impl ListBucketsFluentBuilder
Sourcepub fn as_input(&self) -> &ListBucketsInputBuilder
pub fn as_input(&self) -> &ListBucketsInputBuilder
Access the ListBuckets as a reference.
Sourcepub async fn send(
self,
) -> Result<ListBucketsOutput, SdkError<ListBucketsError, HttpResponse>>
pub async fn send( self, ) -> Result<ListBucketsOutput, SdkError<ListBucketsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListBucketsOutput, ListBucketsError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListBucketsOutput, ListBucketsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> ListBucketsPaginator
pub fn into_paginator(self) -> ListBucketsPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn max_buckets(self, input: i32) -> Self
pub fn max_buckets(self, input: i32) -> Self
Maximum number of buckets to be returned in response. When the number is more than the count of buckets that are owned by an Amazon Web Services account, return all the buckets in response.
Sourcepub fn set_max_buckets(self, input: Option<i32>) -> Self
pub fn set_max_buckets(self, input: Option<i32>) -> Self
Maximum number of buckets to be returned in response. When the number is more than the count of buckets that are owned by an Amazon Web Services account, return all the buckets in response.
Sourcepub fn get_max_buckets(&self) -> &Option<i32>
pub fn get_max_buckets(&self) -> &Option<i32>
Maximum number of buckets to be returned in response. When the number is more than the count of buckets that are owned by an Amazon Web Services account, return all the buckets in response.
Sourcepub fn continuation_token(self, input: impl Into<String>) -> Self
pub fn continuation_token(self, input: impl Into<String>) -> Self
ContinuationToken indicates to Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key. You can use this ContinuationToken for pagination of the list results.
Length Constraints: Minimum length of 0. Maximum length of 1024.
Required: No.
If you specify the bucket-region, prefix, or continuation-token query parameters without using max-buckets to set the maximum number of buckets returned in the response, Amazon S3 applies a default page size of 10,000 and provides a continuation token if there are more buckets.
Sourcepub fn set_continuation_token(self, input: Option<String>) -> Self
pub fn set_continuation_token(self, input: Option<String>) -> Self
ContinuationToken indicates to Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key. You can use this ContinuationToken for pagination of the list results.
Length Constraints: Minimum length of 0. Maximum length of 1024.
Required: No.
If you specify the bucket-region, prefix, or continuation-token query parameters without using max-buckets to set the maximum number of buckets returned in the response, Amazon S3 applies a default page size of 10,000 and provides a continuation token if there are more buckets.
Sourcepub fn get_continuation_token(&self) -> &Option<String>
pub fn get_continuation_token(&self) -> &Option<String>
ContinuationToken indicates to Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key. You can use this ContinuationToken for pagination of the list results.
Length Constraints: Minimum length of 0. Maximum length of 1024.
Required: No.
If you specify the bucket-region, prefix, or continuation-token query parameters without using max-buckets to set the maximum number of buckets returned in the response, Amazon S3 applies a default page size of 10,000 and provides a continuation token if there are more buckets.
Sourcepub fn prefix(self, input: impl Into<String>) -> Self
pub fn prefix(self, input: impl Into<String>) -> Self
Limits the response to bucket names that begin with the specified bucket name prefix.
Sourcepub fn set_prefix(self, input: Option<String>) -> Self
pub fn set_prefix(self, input: Option<String>) -> Self
Limits the response to bucket names that begin with the specified bucket name prefix.
Sourcepub fn get_prefix(&self) -> &Option<String>
pub fn get_prefix(&self) -> &Option<String>
Limits the response to bucket names that begin with the specified bucket name prefix.
Sourcepub fn bucket_region(self, input: impl Into<String>) -> Self
pub fn bucket_region(self, input: impl Into<String>) -> Self
Limits the response to buckets that are located in the specified Amazon Web Services Region. The Amazon Web Services Region must be expressed according to the Amazon Web Services Region code, such as us-west-2 for the US West (Oregon) Region. For a list of the valid values for all of the Amazon Web Services Regions, see Regions and Endpoints.
Requests made to a Regional endpoint that is different from the bucket-region parameter are not supported. For example, if you want to limit the response to your buckets in Region us-west-2, the request must be made to an endpoint in Region us-west-2.
Sourcepub fn set_bucket_region(self, input: Option<String>) -> Self
pub fn set_bucket_region(self, input: Option<String>) -> Self
Limits the response to buckets that are located in the specified Amazon Web Services Region. The Amazon Web Services Region must be expressed according to the Amazon Web Services Region code, such as us-west-2 for the US West (Oregon) Region. For a list of the valid values for all of the Amazon Web Services Regions, see Regions and Endpoints.
Requests made to a Regional endpoint that is different from the bucket-region parameter are not supported. For example, if you want to limit the response to your buckets in Region us-west-2, the request must be made to an endpoint in Region us-west-2.
Sourcepub fn get_bucket_region(&self) -> &Option<String>
pub fn get_bucket_region(&self) -> &Option<String>
Limits the response to buckets that are located in the specified Amazon Web Services Region. The Amazon Web Services Region must be expressed according to the Amazon Web Services Region code, such as us-west-2 for the US West (Oregon) Region. For a list of the valid values for all of the Amazon Web Services Regions, see Regions and Endpoints.
Requests made to a Regional endpoint that is different from the bucket-region parameter are not supported. For example, if you want to limit the response to your buckets in Region us-west-2, the request must be made to an endpoint in Region us-west-2.
Trait Implementations§
Source§impl Clone for ListBucketsFluentBuilder
impl Clone for ListBucketsFluentBuilder
Source§fn clone(&self) -> ListBucketsFluentBuilder
fn clone(&self) -> ListBucketsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ListBucketsFluentBuilder
impl !RefUnwindSafe for ListBucketsFluentBuilder
impl Send for ListBucketsFluentBuilder
impl Sync for ListBucketsFluentBuilder
impl Unpin for ListBucketsFluentBuilder
impl !UnwindSafe for ListBucketsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);