pub struct PutBucketAccelerateConfigurationFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to PutBucketAccelerateConfiguration.
This operation is not supported for directory buckets.
Sets the accelerate configuration of an existing bucket. Amazon S3 Transfer Acceleration is a bucket-level feature that enables you to perform faster data transfers to Amazon S3.
To use this operation, you must have permission to perform the s3:PutAccelerateConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
The Transfer Acceleration state of a bucket can be set to one of the following two values:
-
Enabled – Enables accelerated data transfers to the bucket.
-
Suspended – Disables accelerated data transfers to the bucket.
The GetBucketAccelerateConfiguration action returns the transfer acceleration state of a bucket.
After setting the Transfer Acceleration state of a bucket to Enabled, it might take up to thirty minutes before the data transfer rates to the bucket increase.
The name of the bucket used for Transfer Acceleration must be DNS-compliant and must not contain periods (".").
For more information about transfer acceleration, see Transfer Acceleration.
The following operations are related to PutBucketAccelerateConfiguration:
Implementations§
Source§impl PutBucketAccelerateConfigurationFluentBuilder
impl PutBucketAccelerateConfigurationFluentBuilder
Sourcepub fn as_input(&self) -> &PutBucketAccelerateConfigurationInputBuilder
pub fn as_input(&self) -> &PutBucketAccelerateConfigurationInputBuilder
Access the PutBucketAccelerateConfiguration as a reference.
Sourcepub async fn send(
self,
) -> Result<PutBucketAccelerateConfigurationOutput, SdkError<PutBucketAccelerateConfigurationError, HttpResponse>>
pub async fn send( self, ) -> Result<PutBucketAccelerateConfigurationOutput, SdkError<PutBucketAccelerateConfigurationError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<PutBucketAccelerateConfigurationOutput, PutBucketAccelerateConfigurationError, Self>
pub fn customize( self, ) -> CustomizableOperation<PutBucketAccelerateConfigurationOutput, PutBucketAccelerateConfigurationError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn bucket(self, input: impl Into<String>) -> Self
pub fn bucket(self, input: impl Into<String>) -> Self
The name of the bucket for which the accelerate configuration is set.
Sourcepub fn set_bucket(self, input: Option<String>) -> Self
pub fn set_bucket(self, input: Option<String>) -> Self
The name of the bucket for which the accelerate configuration is set.
Sourcepub fn get_bucket(&self) -> &Option<String>
pub fn get_bucket(&self) -> &Option<String>
The name of the bucket for which the accelerate configuration is set.
Sourcepub fn accelerate_configuration(self, input: AccelerateConfiguration) -> Self
pub fn accelerate_configuration(self, input: AccelerateConfiguration) -> Self
Container for setting the transfer acceleration state.
Sourcepub fn set_accelerate_configuration(
self,
input: Option<AccelerateConfiguration>,
) -> Self
pub fn set_accelerate_configuration( self, input: Option<AccelerateConfiguration>, ) -> Self
Container for setting the transfer acceleration state.
Sourcepub fn get_accelerate_configuration(&self) -> &Option<AccelerateConfiguration>
pub fn get_accelerate_configuration(&self) -> &Option<AccelerateConfiguration>
Container for setting the transfer acceleration state.
Sourcepub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
pub fn expected_bucket_owner(self, input: impl Into<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Sourcepub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
pub fn set_expected_bucket_owner(self, input: Option<String>) -> Self
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Sourcepub fn get_expected_bucket_owner(&self) -> &Option<String>
pub fn get_expected_bucket_owner(&self) -> &Option<String>
The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code 403 Forbidden (access denied).
Sourcepub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
pub fn checksum_algorithm(self, input: ChecksumAlgorithm) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
Sourcepub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
pub fn set_checksum_algorithm(self, input: Option<ChecksumAlgorithm>) -> Self
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
Sourcepub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>
Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.
Trait Implementations§
Source§impl Clone for PutBucketAccelerateConfigurationFluentBuilder
impl Clone for PutBucketAccelerateConfigurationFluentBuilder
Source§fn clone(&self) -> PutBucketAccelerateConfigurationFluentBuilder
fn clone(&self) -> PutBucketAccelerateConfigurationFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for PutBucketAccelerateConfigurationFluentBuilder
impl !RefUnwindSafe for PutBucketAccelerateConfigurationFluentBuilder
impl Send for PutBucketAccelerateConfigurationFluentBuilder
impl Sync for PutBucketAccelerateConfigurationFluentBuilder
impl Unpin for PutBucketAccelerateConfigurationFluentBuilder
impl !UnwindSafe for PutBucketAccelerateConfigurationFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);