aws_sdk_s3/operation/list_multipart_uploads/

builders.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::list_multipart_uploads::_list_multipart_uploads_output::ListMultipartUploadsOutputBuilder;

pub use crate::operation::list_multipart_uploads::_list_multipart_uploads_input::ListMultipartUploadsInputBuilder;

impl crate::operation::list_multipart_uploads::builders::ListMultipartUploadsInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::list_multipart_uploads::ListMultipartUploadsOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::list_multipart_uploads::ListMultipartUploadsError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.list_multipart_uploads();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `ListMultipartUploads`.
///
/// <p>This operation lists in-progress multipart uploads in a bucket. An in-progress multipart upload is a multipart upload that has been initiated by the <code>CreateMultipartUpload</code> request, but has not yet been completed or aborted.</p><note>
/// <p><b>Directory buckets</b> - If multipart uploads in a directory bucket are in progress, you can't delete the bucket until all the in-progress multipart uploads are aborted or completed. To delete these in-progress multipart uploads, use the <code>ListMultipartUploads</code> operation to list the in-progress multipart uploads in the bucket and use the <code>AbortMultipartUpload</code> operation to abort all the in-progress multipart uploads.</p>
/// </note>
/// <p>The <code>ListMultipartUploads</code> operation returns a maximum of 1,000 multipart uploads in the response. The limit of 1,000 multipart uploads is also the default value. You can further limit the number of uploads in a response by specifying the <code>max-uploads</code> request parameter. If there are more than 1,000 multipart uploads that satisfy your <code>ListMultipartUploads</code> request, the response returns an <code>IsTruncated</code> element with the value of <code>true</code>, a <code>NextKeyMarker</code> element, and a <code>NextUploadIdMarker</code> element. To list the remaining multipart uploads, you need to make subsequent <code>ListMultipartUploads</code> requests. In these requests, include two query parameters: <code>key-marker</code> and <code>upload-id-marker</code>. Set the value of <code>key-marker</code> to the <code>NextKeyMarker</code> value from the previous response. Similarly, set the value of <code>upload-id-marker</code> to the <code>NextUploadIdMarker</code> value from the previous response.</p><note>
/// <p><b>Directory buckets</b> - The <code>upload-id-marker</code> element and the <code>NextUploadIdMarker</code> element aren't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of <code>key-marker</code> to the <code>NextKeyMarker</code> value from the previous response.</p>
/// </note>
/// <p>For more information about multipart uploads, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/uploadobjusingmpu.html">Uploading Objects Using Multipart Upload</a> in the <i>Amazon S3 User Guide</i>.</p><note>
/// <p><b>Directory buckets</b> - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com/<i>key-name</i> </code>. Path-style requests are not supported. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints</a> in the <i>Amazon S3 User Guide</i>.</p>
/// </note>
/// <dl>
/// <dt>
/// Permissions
/// </dt>
/// <dd>
/// <ul>
/// <li>
/// <p><b>General purpose bucket permissions</b> - For information about permissions required to use the multipart upload API, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html">Multipart Upload and Permissions</a> in the <i>Amazon S3 User Guide</i>.</p></li>
/// <li>
/// <p><b>Directory bucket permissions</b> - To grant access to this API operation on a directory bucket, we recommend that you use the <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateSession.html"> <code>CreateSession</code> </a> API operation for session-based authorization. Specifically, you grant the <code>s3express:CreateSession</code> permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the <code>CreateSession</code> API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another <code>CreateSession</code> API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateSession.html"> <code>CreateSession</code> </a>.</p></li>
/// </ul>
/// </dd>
/// <dt>
/// Sorting of multipart uploads in response
/// </dt>
/// <dd>
/// <ul>
/// <li>
/// <p><b>General purpose bucket</b> - In the <code>ListMultipartUploads</code> response, the multipart uploads are sorted based on two criteria:</p>
/// <ul>
/// <li>
/// <p>Key-based sorting - Multipart uploads are initially sorted in ascending order based on their object keys.</p></li>
/// <li>
/// <p>Time-based sorting - For uploads that share the same object key, they are further sorted in ascending order based on the upload initiation time. Among uploads with the same key, the one that was initiated first will appear before the ones that were initiated later.</p></li>
/// </ul></li>
/// <li>
/// <p><b>Directory bucket</b> - In the <code>ListMultipartUploads</code> response, the multipart uploads aren't sorted lexicographically based on the object keys.</p></li>
/// </ul>
/// </dd>
/// <dt>
/// HTTP Host header syntax
/// </dt>
/// <dd>
/// <p><b>Directory buckets </b> - The HTTP Host header syntax is <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>.</p>
/// </dd>
/// </dl>
/// <p>The following operations are related to <code>ListMultipartUploads</code>:</p>
/// <ul>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateMultipartUpload.html">CreateMultipartUpload</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPart.html">UploadPart</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CompleteMultipartUpload.html">CompleteMultipartUpload</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListParts.html">ListParts</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_AbortMultipartUpload.html">AbortMultipartUpload</a></p></li>
/// </ul>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct ListMultipartUploadsFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::list_multipart_uploads::builders::ListMultipartUploadsInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::list_multipart_uploads::ListMultipartUploadsOutput,
        crate::operation::list_multipart_uploads::ListMultipartUploadsError,
    > for ListMultipartUploadsFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::list_multipart_uploads::ListMultipartUploadsOutput,
            crate::operation::list_multipart_uploads::ListMultipartUploadsError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl ListMultipartUploadsFluentBuilder {
    /// Creates a new `ListMultipartUploadsFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the ListMultipartUploads as a reference.
    pub fn as_input(&self) -> &crate::operation::list_multipart_uploads::builders::ListMultipartUploadsInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::list_multipart_uploads::ListMultipartUploadsOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::list_multipart_uploads::ListMultipartUploadsError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::list_multipart_uploads::ListMultipartUploads::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::list_multipart_uploads::ListMultipartUploads::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::list_multipart_uploads::ListMultipartUploadsOutput,
        crate::operation::list_multipart_uploads::ListMultipartUploadsError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The name of the bucket to which the multipart upload was initiated.</p>
    /// <p><b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code> <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code> <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming rules</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p><b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>Access points and Object Lambda access points are not supported by directory buckets.</p>
    /// </note>
    /// <p><b>S3 on Outposts</b> - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn bucket(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.bucket(input.into());
        self
    }
    /// <p>The name of the bucket to which the multipart upload was initiated.</p>
    /// <p><b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code> <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code> <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming rules</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p><b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>Access points and Object Lambda access points are not supported by directory buckets.</p>
    /// </note>
    /// <p><b>S3 on Outposts</b> - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_bucket(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_bucket(input);
        self
    }
    /// <p>The name of the bucket to which the multipart upload was initiated.</p>
    /// <p><b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code> <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code> <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming rules</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p><b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>Access points and Object Lambda access points are not supported by directory buckets.</p>
    /// </note>
    /// <p><b>S3 on Outposts</b> - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_bucket(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_bucket()
    }
    /// <p>Character you use to group keys.</p>
    /// <p>All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, <code>CommonPrefixes</code>. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under <code>CommonPrefixes</code> result element are not returned elsewhere in the response.</p><note>
    /// <p><b>Directory buckets</b> - For directory buckets, <code>/</code> is the only supported delimiter.</p>
    /// </note>
    pub fn delimiter(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.delimiter(input.into());
        self
    }
    /// <p>Character you use to group keys.</p>
    /// <p>All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, <code>CommonPrefixes</code>. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under <code>CommonPrefixes</code> result element are not returned elsewhere in the response.</p><note>
    /// <p><b>Directory buckets</b> - For directory buckets, <code>/</code> is the only supported delimiter.</p>
    /// </note>
    pub fn set_delimiter(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_delimiter(input);
        self
    }
    /// <p>Character you use to group keys.</p>
    /// <p>All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, <code>CommonPrefixes</code>. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under <code>CommonPrefixes</code> result element are not returned elsewhere in the response.</p><note>
    /// <p><b>Directory buckets</b> - For directory buckets, <code>/</code> is the only supported delimiter.</p>
    /// </note>
    pub fn get_delimiter(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_delimiter()
    }
    /// <p>Encoding type used by Amazon S3 to encode the <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-keys.html">object keys</a> in the response. Responses are encoded only in UTF-8. An object key can contain any Unicode character. However, the XML 1.0 parser can't parse certain characters, such as characters with an ASCII value from 0 to 10. For characters that aren't supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response. For more information about characters to avoid in object key names, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-keys.html#object-key-guidelines">Object key naming guidelines</a>.</p><note>
    /// <p>When using the URL encoding type, non-ASCII characters that are used in an object's key name will be percent-encoded according to UTF-8 code values. For example, the object <code>test_file(3).png</code> will appear as <code>test_file%283%29.png</code>.</p>
    /// </note>
    pub fn encoding_type(mut self, input: crate::types::EncodingType) -> Self {
        self.inner = self.inner.encoding_type(input);
        self
    }
    /// <p>Encoding type used by Amazon S3 to encode the <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-keys.html">object keys</a> in the response. Responses are encoded only in UTF-8. An object key can contain any Unicode character. However, the XML 1.0 parser can't parse certain characters, such as characters with an ASCII value from 0 to 10. For characters that aren't supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response. For more information about characters to avoid in object key names, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-keys.html#object-key-guidelines">Object key naming guidelines</a>.</p><note>
    /// <p>When using the URL encoding type, non-ASCII characters that are used in an object's key name will be percent-encoded according to UTF-8 code values. For example, the object <code>test_file(3).png</code> will appear as <code>test_file%283%29.png</code>.</p>
    /// </note>
    pub fn set_encoding_type(mut self, input: ::std::option::Option<crate::types::EncodingType>) -> Self {
        self.inner = self.inner.set_encoding_type(input);
        self
    }
    /// <p>Encoding type used by Amazon S3 to encode the <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-keys.html">object keys</a> in the response. Responses are encoded only in UTF-8. An object key can contain any Unicode character. However, the XML 1.0 parser can't parse certain characters, such as characters with an ASCII value from 0 to 10. For characters that aren't supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response. For more information about characters to avoid in object key names, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/object-keys.html#object-key-guidelines">Object key naming guidelines</a>.</p><note>
    /// <p>When using the URL encoding type, non-ASCII characters that are used in an object's key name will be percent-encoded according to UTF-8 code values. For example, the object <code>test_file(3).png</code> will appear as <code>test_file%283%29.png</code>.</p>
    /// </note>
    pub fn get_encoding_type(&self) -> &::std::option::Option<crate::types::EncodingType> {
        self.inner.get_encoding_type()
    }
    /// <p>Specifies the multipart upload after which listing should begin.</p><note>
    /// <ul>
    /// <li>
    /// <p><b>General purpose buckets</b> - For general purpose buckets, <code>key-marker</code> is an object key. Together with <code>upload-id-marker</code>, this parameter specifies the multipart upload after which listing should begin.</p>
    /// <p>If <code>upload-id-marker</code> is not specified, only the keys lexicographically greater than the specified <code>key-marker</code> will be included in the list.</p>
    /// <p>If <code>upload-id-marker</code> is specified, any multipart uploads for a key equal to the <code>key-marker</code> might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified <code>upload-id-marker</code>.</p></li>
    /// <li>
    /// <p><b>Directory buckets</b> - For directory buckets, <code>key-marker</code> is obfuscated and isn't a real object key. The <code>upload-id-marker</code> parameter isn't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of <code>key-marker</code> to the <code>NextKeyMarker</code> value from the previous response.</p>
    /// <p>In the <code>ListMultipartUploads</code> response, the multipart uploads aren't sorted lexicographically based on the object keys.</p></li>
    /// </ul>
    /// </note>
    pub fn key_marker(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.key_marker(input.into());
        self
    }
    /// <p>Specifies the multipart upload after which listing should begin.</p><note>
    /// <ul>
    /// <li>
    /// <p><b>General purpose buckets</b> - For general purpose buckets, <code>key-marker</code> is an object key. Together with <code>upload-id-marker</code>, this parameter specifies the multipart upload after which listing should begin.</p>
    /// <p>If <code>upload-id-marker</code> is not specified, only the keys lexicographically greater than the specified <code>key-marker</code> will be included in the list.</p>
    /// <p>If <code>upload-id-marker</code> is specified, any multipart uploads for a key equal to the <code>key-marker</code> might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified <code>upload-id-marker</code>.</p></li>
    /// <li>
    /// <p><b>Directory buckets</b> - For directory buckets, <code>key-marker</code> is obfuscated and isn't a real object key. The <code>upload-id-marker</code> parameter isn't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of <code>key-marker</code> to the <code>NextKeyMarker</code> value from the previous response.</p>
    /// <p>In the <code>ListMultipartUploads</code> response, the multipart uploads aren't sorted lexicographically based on the object keys.</p></li>
    /// </ul>
    /// </note>
    pub fn set_key_marker(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_key_marker(input);
        self
    }
    /// <p>Specifies the multipart upload after which listing should begin.</p><note>
    /// <ul>
    /// <li>
    /// <p><b>General purpose buckets</b> - For general purpose buckets, <code>key-marker</code> is an object key. Together with <code>upload-id-marker</code>, this parameter specifies the multipart upload after which listing should begin.</p>
    /// <p>If <code>upload-id-marker</code> is not specified, only the keys lexicographically greater than the specified <code>key-marker</code> will be included in the list.</p>
    /// <p>If <code>upload-id-marker</code> is specified, any multipart uploads for a key equal to the <code>key-marker</code> might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified <code>upload-id-marker</code>.</p></li>
    /// <li>
    /// <p><b>Directory buckets</b> - For directory buckets, <code>key-marker</code> is obfuscated and isn't a real object key. The <code>upload-id-marker</code> parameter isn't supported by directory buckets. To list the additional multipart uploads, you only need to set the value of <code>key-marker</code> to the <code>NextKeyMarker</code> value from the previous response.</p>
    /// <p>In the <code>ListMultipartUploads</code> response, the multipart uploads aren't sorted lexicographically based on the object keys.</p></li>
    /// </ul>
    /// </note>
    pub fn get_key_marker(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_key_marker()
    }
    /// <p>Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.</p>
    pub fn max_uploads(mut self, input: i32) -> Self {
        self.inner = self.inner.max_uploads(input);
        self
    }
    /// <p>Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.</p>
    pub fn set_max_uploads(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_max_uploads(input);
        self
    }
    /// <p>Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.</p>
    pub fn get_max_uploads(&self) -> &::std::option::Option<i32> {
        self.inner.get_max_uploads()
    }
    /// <p>Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using <code>prefix</code> to make groups in the same way that you'd use a folder in a file system.)</p><note>
    /// <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p>
    /// </note>
    pub fn prefix(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.prefix(input.into());
        self
    }
    /// <p>Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using <code>prefix</code> to make groups in the same way that you'd use a folder in a file system.)</p><note>
    /// <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p>
    /// </note>
    pub fn set_prefix(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_prefix(input);
        self
    }
    /// <p>Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using <code>prefix</code> to make groups in the same way that you'd use a folder in a file system.)</p><note>
    /// <p><b>Directory buckets</b> - For directory buckets, only prefixes that end in a delimiter (<code>/</code>) are supported.</p>
    /// </note>
    pub fn get_prefix(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_prefix()
    }
    /// <p>Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified <code>upload-id-marker</code>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn upload_id_marker(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.upload_id_marker(input.into());
        self
    }
    /// <p>Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified <code>upload-id-marker</code>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_upload_id_marker(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_upload_id_marker(input);
        self
    }
    /// <p>Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified <code>upload-id-marker</code>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_upload_id_marker(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_upload_id_marker()
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn expected_bucket_owner(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.expected_bucket_owner(input.into());
        self
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn set_expected_bucket_owner(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_expected_bucket_owner(input);
        self
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn get_expected_bucket_owner(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_expected_bucket_owner()
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn request_payer(mut self, input: crate::types::RequestPayer) -> Self {
        self.inner = self.inner.request_payer(input);
        self
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_request_payer(mut self, input: ::std::option::Option<crate::types::RequestPayer>) -> Self {
        self.inner = self.inner.set_request_payer(input);
        self
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_request_payer(&self) -> &::std::option::Option<crate::types::RequestPayer> {
        self.inner.get_request_payer()
    }
}