aws_sdk_s3/operation/put_bucket_website/

builders.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::put_bucket_website::_put_bucket_website_output::PutBucketWebsiteOutputBuilder;

pub use crate::operation::put_bucket_website::_put_bucket_website_input::PutBucketWebsiteInputBuilder;

impl crate::operation::put_bucket_website::builders::PutBucketWebsiteInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::put_bucket_website::PutBucketWebsiteOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::put_bucket_website::PutBucketWebsiteError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.put_bucket_website();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `PutBucketWebsite`.
///
/// <note>
/// <p>This operation is not supported for directory buckets.</p>
/// </note>
/// <p>Sets the configuration of the website that is specified in the <code>website</code> subresource. To configure a bucket as a website, you can add this subresource on the bucket with website configuration information such as the file name of the index document and any redirect rules. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteHosting.html">Hosting Websites on Amazon S3</a>.</p>
/// <p>This PUT action requires the <code>S3:PutBucketWebsite</code> permission. By default, only the bucket owner can configure the website attached to a bucket; however, bucket owners can allow other users to set the website configuration by writing a bucket policy that grants them the <code>S3:PutBucketWebsite</code> permission.</p>
/// <p>To redirect all website requests sent to the bucket's website endpoint, you add a website configuration with the following elements. Because all requests are sent to another website, you don't need to provide index document name for the bucket.</p>
/// <ul>
/// <li>
/// <p><code>WebsiteConfiguration</code></p></li>
/// <li>
/// <p><code>RedirectAllRequestsTo</code></p></li>
/// <li>
/// <p><code>HostName</code></p></li>
/// <li>
/// <p><code>Protocol</code></p></li>
/// </ul>
/// <p>If you want granular control over redirects, you can use the following elements to add routing rules that describe conditions for redirecting requests and information about the redirect destination. In this case, the website configuration must provide an index document for the bucket, because some requests might not be redirected.</p>
/// <ul>
/// <li>
/// <p><code>WebsiteConfiguration</code></p></li>
/// <li>
/// <p><code>IndexDocument</code></p></li>
/// <li>
/// <p><code>Suffix</code></p></li>
/// <li>
/// <p><code>ErrorDocument</code></p></li>
/// <li>
/// <p><code>Key</code></p></li>
/// <li>
/// <p><code>RoutingRules</code></p></li>
/// <li>
/// <p><code>RoutingRule</code></p></li>
/// <li>
/// <p><code>Condition</code></p></li>
/// <li>
/// <p><code>HttpErrorCodeReturnedEquals</code></p></li>
/// <li>
/// <p><code>KeyPrefixEquals</code></p></li>
/// <li>
/// <p><code>Redirect</code></p></li>
/// <li>
/// <p><code>Protocol</code></p></li>
/// <li>
/// <p><code>HostName</code></p></li>
/// <li>
/// <p><code>ReplaceKeyPrefixWith</code></p></li>
/// <li>
/// <p><code>ReplaceKeyWith</code></p></li>
/// <li>
/// <p><code>HttpRedirectCode</code></p></li>
/// </ul>
/// <p>Amazon S3 has a limitation of 50 routing rules per website configuration. If you require more than 50 routing rules, you can use object redirect. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/how-to-page-redirect.html">Configuring an Object Redirect</a> in the <i>Amazon S3 User Guide</i>.</p>
/// <p>The maximum request length is limited to 128 KB.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct PutBucketWebsiteFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::put_bucket_website::builders::PutBucketWebsiteInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::put_bucket_website::PutBucketWebsiteOutput,
        crate::operation::put_bucket_website::PutBucketWebsiteError,
    > for PutBucketWebsiteFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::put_bucket_website::PutBucketWebsiteOutput,
            crate::operation::put_bucket_website::PutBucketWebsiteError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl PutBucketWebsiteFluentBuilder {
    /// Creates a new `PutBucketWebsiteFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the PutBucketWebsite as a reference.
    pub fn as_input(&self) -> &crate::operation::put_bucket_website::builders::PutBucketWebsiteInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::put_bucket_website::PutBucketWebsiteOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::put_bucket_website::PutBucketWebsiteError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::put_bucket_website::PutBucketWebsite::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::put_bucket_website::PutBucketWebsite::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::put_bucket_website::PutBucketWebsiteOutput,
        crate::operation::put_bucket_website::PutBucketWebsiteError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The bucket name.</p>
    pub fn bucket(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.bucket(input.into());
        self
    }
    /// <p>The bucket name.</p>
    pub fn set_bucket(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_bucket(input);
        self
    }
    /// <p>The bucket name.</p>
    pub fn get_bucket(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_bucket()
    }
    /// <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
    /// <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
    pub fn content_md5(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.content_md5(input.into());
        self
    }
    /// <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
    /// <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
    pub fn set_content_md5(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_content_md5(input);
        self
    }
    /// <p>The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see <a href="http://www.ietf.org/rfc/rfc1864.txt">RFC 1864</a>.</p>
    /// <p>For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.</p>
    pub fn get_content_md5(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_content_md5()
    }
    /// <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p>
    pub fn checksum_algorithm(mut self, input: crate::types::ChecksumAlgorithm) -> Self {
        self.inner = self.inner.checksum_algorithm(input);
        self
    }
    /// <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p>
    pub fn set_checksum_algorithm(mut self, input: ::std::option::Option<crate::types::ChecksumAlgorithm>) -> Self {
        self.inner = self.inner.set_checksum_algorithm(input);
        self
    }
    /// <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p>
    pub fn get_checksum_algorithm(&self) -> &::std::option::Option<crate::types::ChecksumAlgorithm> {
        self.inner.get_checksum_algorithm()
    }
    /// <p>Container for the request.</p>
    pub fn website_configuration(mut self, input: crate::types::WebsiteConfiguration) -> Self {
        self.inner = self.inner.website_configuration(input);
        self
    }
    /// <p>Container for the request.</p>
    pub fn set_website_configuration(mut self, input: ::std::option::Option<crate::types::WebsiteConfiguration>) -> Self {
        self.inner = self.inner.set_website_configuration(input);
        self
    }
    /// <p>Container for the request.</p>
    pub fn get_website_configuration(&self) -> &::std::option::Option<crate::types::WebsiteConfiguration> {
        self.inner.get_website_configuration()
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn expected_bucket_owner(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.expected_bucket_owner(input.into());
        self
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn set_expected_bucket_owner(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_expected_bucket_owner(input);
        self
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn get_expected_bucket_owner(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_expected_bucket_owner()
    }
}