aws_sdk_s3/operation/upload_part/

builders.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::upload_part::_upload_part_output::UploadPartOutputBuilder;

pub use crate::operation::upload_part::_upload_part_input::UploadPartInputBuilder;

impl crate::operation::upload_part::builders::UploadPartInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::upload_part::UploadPartOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::upload_part::UploadPartError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.upload_part();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `UploadPart`.
///
/// <p>Uploads a part in a multipart upload.</p><note>
/// <p>In this operation, you provide new data as a part of an object in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPartCopy.html">UploadPartCopy</a> operation.</p>
/// </note>
/// <p>You must initiate a multipart upload (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateMultipartUpload.html">CreateMultipartUpload</a>) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier that you must include in your upload part request.</p>
/// <p>Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.</p>
/// <p>For information about maximum and minimum part sizes and other multipart upload specifications, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/qfacts.html">Multipart upload limits</a> in the <i>Amazon S3 User Guide</i>.</p><note>
/// <p>After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.</p>
/// </note>
/// <p>For more information on multipart uploads, go to <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuoverview.html">Multipart Upload Overview</a> in the <i>Amazon S3 User Guide </i>.</p><note>
/// <p><b>Directory buckets</b> - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com/<i>key-name</i> </code>. Path-style requests are not supported. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints</a> in the <i>Amazon S3 User Guide</i>.</p>
/// </note>
/// <dl>
/// <dt>
/// Permissions
/// </dt>
/// <dd>
/// <ul>
/// <li>
/// <p><b>General purpose bucket permissions</b> - To perform a multipart upload with encryption using an Key Management Service key, the requester must have permission to the <code>kms:Decrypt</code> and <code>kms:GenerateDataKey</code> actions on the key. The requester must also have permissions for the <code>kms:GenerateDataKey</code> action for the <code>CreateMultipartUpload</code> API. Then, the requester needs permissions for the <code>kms:Decrypt</code> action on the <code>UploadPart</code> and <code>UploadPartCopy</code> APIs.</p>
/// <p>These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information about KMS permissions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/UsingKMSEncryption.html">Protecting data using server-side encryption with KMS</a> in the <i>Amazon S3 User Guide</i>. For information about the permissions required to use the multipart upload API, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/mpuAndPermissions.html">Multipart upload and permissions</a> and <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/mpuoverview.html#mpuAndPermissions">Multipart upload API and permissions</a> in the <i>Amazon S3 User Guide</i>.</p></li>
/// <li>
/// <p><b>Directory bucket permissions</b> - To grant access to this API operation on a directory bucket, we recommend that you use the <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateSession.html"> <code>CreateSession</code> </a> API operation for session-based authorization. Specifically, you grant the <code>s3express:CreateSession</code> permission to the directory bucket in a bucket policy or an IAM identity-based policy. Then, you make the <code>CreateSession</code> API call on the bucket to obtain a session token. With the session token in your request header, you can make API requests to this operation. After the session token expires, you make another <code>CreateSession</code> API call to generate a new session token for use. Amazon Web Services CLI or SDKs create session and refresh the session token automatically to avoid service interruptions when a session expires. For more information about authorization, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateSession.html"> <code>CreateSession</code> </a>.</p>
/// <p>If the object is encrypted with SSE-KMS, you must also have the <code>kms:GenerateDataKey</code> and <code>kms:Decrypt</code> permissions in IAM identity-based policies and KMS key policies for the KMS key.</p></li>
/// </ul>
/// </dd>
/// <dt>
/// Data integrity
/// </dt>
/// <dd>
/// <p><b>General purpose bucket</b> - To ensure that data is not corrupted traversing the network, specify the <code>Content-MD5</code> header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error. If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the <code>x-amz-content-sha256</code> header as a checksum instead of <code>Content-MD5</code>. For more information see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-auth-using-authorization-header.html">Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4)</a>.</p><note>
/// <p><b>Directory buckets</b> - MD5 is not supported by directory buckets. You can use checksum algorithms to check object integrity.</p>
/// </note>
/// </dd>
/// <dt>
/// Encryption
/// </dt>
/// <dd>
/// <ul>
/// <li>
/// <p><b>General purpose bucket</b> - Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C).</p>
/// <p>Server-side encryption is supported by the S3 Multipart Upload operations. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateMultipartUpload.html">CreateMultipartUpload</a>.</p>
/// <p>If you request server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following request headers.</p>
/// <ul>
/// <li>
/// <p>x-amz-server-side-encryption-customer-algorithm</p></li>
/// <li>
/// <p>x-amz-server-side-encryption-customer-key</p></li>
/// <li>
/// <p>x-amz-server-side-encryption-customer-key-MD5</p></li>
/// </ul>
/// <p>For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/UsingServerSideEncryption.html">Using Server-Side Encryption</a> in the <i>Amazon S3 User Guide</i>.</p></li>
/// <li>
/// <p><b>Directory buckets </b> - For directory buckets, there are only two supported options for server-side encryption: server-side encryption with Amazon S3 managed keys (SSE-S3) (<code>AES256</code>) and server-side encryption with KMS keys (SSE-KMS) (<code>aws:kms</code>).</p></li>
/// </ul>
/// </dd>
/// <dt>
/// Special errors
/// </dt>
/// <dd>
/// <ul>
/// <li>
/// <p>Error Code: <code>NoSuchUpload</code></p>
/// <ul>
/// <li>
/// <p>Description: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.</p></li>
/// <li>
/// <p>HTTP Status Code: 404 Not Found</p></li>
/// <li>
/// <p>SOAP Fault Code Prefix: Client</p></li>
/// </ul></li>
/// </ul>
/// </dd>
/// <dt>
/// HTTP Host header syntax
/// </dt>
/// <dd>
/// <p><b>Directory buckets </b> - The HTTP Host header syntax is <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>.</p>
/// </dd>
/// </dl>
/// <p>The following operations are related to <code>UploadPart</code>:</p>
/// <ul>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateMultipartUpload.html">CreateMultipartUpload</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CompleteMultipartUpload.html">CompleteMultipartUpload</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_AbortMultipartUpload.html">AbortMultipartUpload</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListParts.html">ListParts</a></p></li>
/// <li>
/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListMultipartUploads.html">ListMultipartUploads</a></p></li>
/// </ul>
#[derive(::std::fmt::Debug)]
pub struct UploadPartFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::upload_part::builders::UploadPartInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::upload_part::UploadPartOutput,
        crate::operation::upload_part::UploadPartError,
    > for UploadPartFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::upload_part::UploadPartOutput,
            crate::operation::upload_part::UploadPartError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl UploadPartFluentBuilder {
    /// Creates a new `UploadPartFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the UploadPart as a reference.
    pub fn as_input(&self) -> &crate::operation::upload_part::builders::UploadPartInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::upload_part::UploadPartOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::upload_part::UploadPartError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::upload_part::UploadPart::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::upload_part::UploadPart::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::upload_part::UploadPartOutput,
        crate::operation::upload_part::UploadPartError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    ///
    /// Creates a presigned request for this operation.
    ///
    /// The `presigning_config` provides additional presigning-specific config values, such as the
    /// amount of time the request should be valid for after creation.
    ///
    /// Presigned requests can be given to other users or applications to access a resource or perform
    /// an operation without having access to the AWS security credentials.
    ///
    /// _Important:_ If you're using credentials that can expire, such as those from STS AssumeRole or SSO, then
    /// the presigned request can only be valid for as long as the credentials used to create it are.
    ///
    #[allow(unused_mut)]
    pub async fn presigned(
        mut self,
        presigning_config: crate::presigning::PresigningConfig,
    ) -> ::std::result::Result<
        crate::presigning::PresignedRequest,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::upload_part::UploadPartError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let runtime_plugins = crate::operation::upload_part::UploadPart::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        )
        .with_client_plugin(crate::presigning_interceptors::SigV4PresigningRuntimePlugin::new(
            presigning_config,
            ::aws_sigv4::http_request::SignableBody::UnsignedPayload,
        ));

        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let mut context = crate::operation::upload_part::UploadPart::orchestrate_with_stop_point(
            &runtime_plugins,
            input,
            ::aws_smithy_runtime::client::orchestrator::StopPoint::BeforeTransmit,
        )
        .await
        .map_err(|err| {
            err.map_service_error(|err| {
                err.downcast::<crate::operation::upload_part::UploadPartError>()
                    .expect("correct error type")
            })
        })?;
        let request = context.take_request().expect("request set before transmit");
        crate::presigning::PresignedRequest::new(request).map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)
    }
    /// <p>Object data.</p>
    pub fn body(mut self, input: ::aws_smithy_types::byte_stream::ByteStream) -> Self {
        self.inner = self.inner.body(input);
        self
    }
    /// <p>Object data.</p>
    pub fn set_body(mut self, input: ::std::option::Option<::aws_smithy_types::byte_stream::ByteStream>) -> Self {
        self.inner = self.inner.set_body(input);
        self
    }
    /// <p>Object data.</p>
    pub fn get_body(&self) -> &::std::option::Option<::aws_smithy_types::byte_stream::ByteStream> {
        self.inner.get_body()
    }
    /// <p>The name of the bucket to which the multipart upload was initiated.</p>
    /// <p><b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code> <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code> <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming rules</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p><b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>Access points and Object Lambda access points are not supported by directory buckets.</p>
    /// </note>
    /// <p><b>S3 on Outposts</b> - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn bucket(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.bucket(input.into());
        self
    }
    /// <p>The name of the bucket to which the multipart upload was initiated.</p>
    /// <p><b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code> <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code> <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming rules</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p><b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>Access points and Object Lambda access points are not supported by directory buckets.</p>
    /// </note>
    /// <p><b>S3 on Outposts</b> - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_bucket(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_bucket(input);
        self
    }
    /// <p>The name of the bucket to which the multipart upload was initiated.</p>
    /// <p><b>Directory buckets</b> - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format <code> <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the format <code> <i>bucket_base_name</i>--<i>az-id</i>--x-s3</code> (for example, <code> <i>DOC-EXAMPLE-BUCKET</i>--<i>usw2-az1</i>--x-s3</code>). For information about bucket naming restrictions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/directory-bucket-naming-rules.html">Directory bucket naming rules</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p><b>Access points</b> - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form <i>AccessPointName</i>-<i>AccountId</i>.s3-accesspoint.<i>Region</i>.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html">Using access points</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>Access points and Object Lambda access points are not supported by directory buckets.</p>
    /// </note>
    /// <p><b>S3 on Outposts</b> - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form <code> <i>AccessPointName</i>-<i>AccountId</i>.<i>outpostID</i>.s3-outposts.<i>Region</i>.amazonaws.com</code>. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html">What is S3 on Outposts?</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_bucket(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_bucket()
    }
    /// <p>Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.</p>
    pub fn content_length(mut self, input: i64) -> Self {
        self.inner = self.inner.content_length(input);
        self
    }
    /// <p>Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.</p>
    pub fn set_content_length(mut self, input: ::std::option::Option<i64>) -> Self {
        self.inner = self.inner.set_content_length(input);
        self
    }
    /// <p>Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.</p>
    pub fn get_content_length(&self) -> &::std::option::Option<i64> {
        self.inner.get_content_length()
    }
    /// <p>The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn content_md5(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.content_md5(input.into());
        self
    }
    /// <p>The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_content_md5(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_content_md5(input);
        self
    }
    /// <p>The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_content_md5(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_content_md5()
    }
    /// <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p>
    /// <p>This checksum algorithm must be the same for all parts and it match the checksum value supplied in the <code>CreateMultipartUpload</code> request.</p>
    pub fn checksum_algorithm(mut self, input: crate::types::ChecksumAlgorithm) -> Self {
        self.inner = self.inner.checksum_algorithm(input);
        self
    }
    /// <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p>
    /// <p>This checksum algorithm must be the same for all parts and it match the checksum value supplied in the <code>CreateMultipartUpload</code> request.</p>
    pub fn set_checksum_algorithm(mut self, input: ::std::option::Option<crate::types::ChecksumAlgorithm>) -> Self {
        self.inner = self.inner.set_checksum_algorithm(input);
        self
    }
    /// <p>Indicates the algorithm used to create the checksum for the object when you use the SDK. This header will not provide any additional functionality if you don't use the SDK. When you send this header, there must be a corresponding <code>x-amz-checksum</code> or <code>x-amz-trailer</code> header sent. Otherwise, Amazon S3 fails the request with the HTTP status code <code>400 Bad Request</code>. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    /// <p>If you provide an individual checksum, Amazon S3 ignores any provided <code>ChecksumAlgorithm</code> parameter.</p>
    /// <p>This checksum algorithm must be the same for all parts and it match the checksum value supplied in the <code>CreateMultipartUpload</code> request.</p>
    pub fn get_checksum_algorithm(&self) -> &::std::option::Option<crate::types::ChecksumAlgorithm> {
        self.inner.get_checksum_algorithm()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_crc32(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_crc32(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_crc32(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_crc32(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32 checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_crc32(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_crc32()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_crc32_c(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_crc32_c(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_crc32_c(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_crc32_c(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC-32C checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_crc32_c(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_crc32_c()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_sha1(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_sha1(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_sha1(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_sha1(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_sha1(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_sha1()
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn checksum_sha256(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.checksum_sha256(input.into());
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn set_checksum_sha256(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_checksum_sha256(input);
        self
    }
    /// <p>This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
    pub fn get_checksum_sha256(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_checksum_sha256()
    }
    /// <p>Object key for which the multipart upload was initiated.</p>
    pub fn key(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.key(input.into());
        self
    }
    /// <p>Object key for which the multipart upload was initiated.</p>
    pub fn set_key(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_key(input);
        self
    }
    /// <p>Object key for which the multipart upload was initiated.</p>
    pub fn get_key(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_key()
    }
    /// <p>Part number of part being uploaded. This is a positive integer between 1 and 10,000.</p>
    pub fn part_number(mut self, input: i32) -> Self {
        self.inner = self.inner.part_number(input);
        self
    }
    /// <p>Part number of part being uploaded. This is a positive integer between 1 and 10,000.</p>
    pub fn set_part_number(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_part_number(input);
        self
    }
    /// <p>Part number of part being uploaded. This is a positive integer between 1 and 10,000.</p>
    pub fn get_part_number(&self) -> &::std::option::Option<i32> {
        self.inner.get_part_number()
    }
    /// <p>Upload ID identifying the multipart upload whose part is being uploaded.</p>
    pub fn upload_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.upload_id(input.into());
        self
    }
    /// <p>Upload ID identifying the multipart upload whose part is being uploaded.</p>
    pub fn set_upload_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_upload_id(input);
        self
    }
    /// <p>Upload ID identifying the multipart upload whose part is being uploaded.</p>
    pub fn get_upload_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_upload_id()
    }
    /// <p>Specifies the algorithm to use when encrypting the object (for example, AES256).</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn sse_customer_algorithm(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.sse_customer_algorithm(input.into());
        self
    }
    /// <p>Specifies the algorithm to use when encrypting the object (for example, AES256).</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_sse_customer_algorithm(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_sse_customer_algorithm(input);
        self
    }
    /// <p>Specifies the algorithm to use when encrypting the object (for example, AES256).</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_sse_customer_algorithm(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_sse_customer_algorithm()
    }
    /// <p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the <code>x-amz-server-side-encryption-customer-algorithm header</code>. This must be the same encryption key specified in the initiate multipart upload request.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn sse_customer_key(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.sse_customer_key(input.into());
        self
    }
    /// <p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the <code>x-amz-server-side-encryption-customer-algorithm header</code>. This must be the same encryption key specified in the initiate multipart upload request.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_sse_customer_key(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_sse_customer_key(input);
        self
    }
    /// <p>Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the <code>x-amz-server-side-encryption-customer-algorithm header</code>. This must be the same encryption key specified in the initiate multipart upload request.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_sse_customer_key(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_sse_customer_key()
    }
    /// <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn sse_customer_key_md5(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.sse_customer_key_md5(input.into());
        self
    }
    /// <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_sse_customer_key_md5(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_sse_customer_key_md5(input);
        self
    }
    /// <p>Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_sse_customer_key_md5(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_sse_customer_key_md5()
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn request_payer(mut self, input: crate::types::RequestPayer) -> Self {
        self.inner = self.inner.request_payer(input);
        self
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn set_request_payer(mut self, input: ::std::option::Option<crate::types::RequestPayer>) -> Self {
        self.inner = self.inner.set_request_payer(input);
        self
    }
    /// <p>Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html">Downloading Objects in Requester Pays Buckets</a> in the <i>Amazon S3 User Guide</i>.</p><note>
    /// <p>This functionality is not supported for directory buckets.</p>
    /// </note>
    pub fn get_request_payer(&self) -> &::std::option::Option<crate::types::RequestPayer> {
        self.inner.get_request_payer()
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn expected_bucket_owner(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.expected_bucket_owner(input.into());
        self
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn set_expected_bucket_owner(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_expected_bucket_owner(input);
        self
    }
    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
    pub fn get_expected_bucket_owner(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_expected_bucket_owner()
    }
}

impl crate::client::customize::internal::CustomizablePresigned<crate::operation::upload_part::UploadPartError> for UploadPartFluentBuilder {
    fn presign(
        self,
        config_override: crate::config::Builder,
        presigning_config: crate::presigning::PresigningConfig,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<crate::presigning::PresignedRequest, crate::operation::upload_part::UploadPartError>,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).presigned(presigning_config).await })
    }
}