aws_sdk_s3/operation/get_public_access_block/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::get_public_access_block::_get_public_access_block_output::GetPublicAccessBlockOutputBuilder;
3
4pub use crate::operation::get_public_access_block::_get_public_access_block_input::GetPublicAccessBlockInputBuilder;
5
6impl crate::operation::get_public_access_block::builders::GetPublicAccessBlockInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::get_public_access_block::GetPublicAccessBlockOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::get_public_access_block::GetPublicAccessBlockError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.get_public_access_block();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `GetPublicAccessBlock`.
24///
25/// <note>
26/// <p>This operation is not supported for directory buckets.</p>
27/// </note>
28/// <p>Retrieves the <code>PublicAccessBlock</code> configuration for an Amazon S3 bucket. To use this operation, you must have the <code>s3:GetBucketPublicAccessBlock</code> permission. For more information about Amazon S3 permissions, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/using-with-s3-actions.html">Specifying Permissions in a Policy</a>.</p><important>
29/// <p>When Amazon S3 evaluates the <code>PublicAccessBlock</code> configuration for a bucket or an object, it checks the <code>PublicAccessBlock</code> configuration for both the bucket (or the bucket that contains the object) and the bucket owner's account. If the <code>PublicAccessBlock</code> settings are different between the bucket and the account, Amazon S3 uses the most restrictive combination of the bucket-level and account-level settings.</p>
30/// </important>
31/// <p>For more information about when Amazon S3 considers a bucket or an object public, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html#access-control-block-public-access-policy-status">The Meaning of "Public"</a>.</p>
32/// <p>The following operations are related to <code>GetPublicAccessBlock</code>:</p>
33/// <ul>
34/// <li>
35/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/dev/access-control-block-public-access.html">Using Amazon S3 Block Public Access</a></p></li>
36/// <li>
37/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutPublicAccessBlock.html">PutPublicAccessBlock</a></p></li>
38/// <li>
39/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetPublicAccessBlock.html">GetPublicAccessBlock</a></p></li>
40/// <li>
41/// <p><a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_DeletePublicAccessBlock.html">DeletePublicAccessBlock</a></p></li>
42/// </ul>
43#[derive(::std::clone::Clone, ::std::fmt::Debug)]
44pub struct GetPublicAccessBlockFluentBuilder {
45    handle: ::std::sync::Arc<crate::client::Handle>,
46    inner: crate::operation::get_public_access_block::builders::GetPublicAccessBlockInputBuilder,
47    config_override: ::std::option::Option<crate::config::Builder>,
48}
49impl
50    crate::client::customize::internal::CustomizableSend<
51        crate::operation::get_public_access_block::GetPublicAccessBlockOutput,
52        crate::operation::get_public_access_block::GetPublicAccessBlockError,
53    > for GetPublicAccessBlockFluentBuilder
54{
55    fn send(
56        self,
57        config_override: crate::config::Builder,
58    ) -> crate::client::customize::internal::BoxFuture<
59        crate::client::customize::internal::SendResult<
60            crate::operation::get_public_access_block::GetPublicAccessBlockOutput,
61            crate::operation::get_public_access_block::GetPublicAccessBlockError,
62        >,
63    > {
64        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
65    }
66}
67impl GetPublicAccessBlockFluentBuilder {
68    /// Creates a new `GetPublicAccessBlockFluentBuilder`.
69    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
70        Self {
71            handle,
72            inner: ::std::default::Default::default(),
73            config_override: ::std::option::Option::None,
74        }
75    }
76    /// Access the GetPublicAccessBlock as a reference.
77    pub fn as_input(&self) -> &crate::operation::get_public_access_block::builders::GetPublicAccessBlockInputBuilder {
78        &self.inner
79    }
80    /// Sends the request and returns the response.
81    ///
82    /// If an error occurs, an `SdkError` will be returned with additional details that
83    /// can be matched against.
84    ///
85    /// By default, any retryable failures will be retried twice. Retry behavior
86    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
87    /// set when configuring the client.
88    pub async fn send(
89        self,
90    ) -> ::std::result::Result<
91        crate::operation::get_public_access_block::GetPublicAccessBlockOutput,
92        ::aws_smithy_runtime_api::client::result::SdkError<
93            crate::operation::get_public_access_block::GetPublicAccessBlockError,
94            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
95        >,
96    > {
97        let input = self
98            .inner
99            .build()
100            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
101        let runtime_plugins = crate::operation::get_public_access_block::GetPublicAccessBlock::operation_runtime_plugins(
102            self.handle.runtime_plugins.clone(),
103            &self.handle.conf,
104            self.config_override,
105        );
106        crate::operation::get_public_access_block::GetPublicAccessBlock::orchestrate(&runtime_plugins, input).await
107    }
108
109    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
110    pub fn customize(
111        self,
112    ) -> crate::client::customize::CustomizableOperation<
113        crate::operation::get_public_access_block::GetPublicAccessBlockOutput,
114        crate::operation::get_public_access_block::GetPublicAccessBlockError,
115        Self,
116    > {
117        crate::client::customize::CustomizableOperation::new(self)
118    }
119    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
120        self.set_config_override(::std::option::Option::Some(config_override.into()));
121        self
122    }
123
124    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
125        self.config_override = config_override;
126        self
127    }
128    /// <p>The name of the Amazon S3 bucket whose <code>PublicAccessBlock</code> configuration you want to retrieve.</p>
129    pub fn bucket(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
130        self.inner = self.inner.bucket(input.into());
131        self
132    }
133    /// <p>The name of the Amazon S3 bucket whose <code>PublicAccessBlock</code> configuration you want to retrieve.</p>
134    pub fn set_bucket(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
135        self.inner = self.inner.set_bucket(input);
136        self
137    }
138    /// <p>The name of the Amazon S3 bucket whose <code>PublicAccessBlock</code> configuration you want to retrieve.</p>
139    pub fn get_bucket(&self) -> &::std::option::Option<::std::string::String> {
140        self.inner.get_bucket()
141    }
142    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
143    pub fn expected_bucket_owner(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
144        self.inner = self.inner.expected_bucket_owner(input.into());
145        self
146    }
147    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
148    pub fn set_expected_bucket_owner(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
149        self.inner = self.inner.set_expected_bucket_owner(input);
150        self
151    }
152    /// <p>The account ID of the expected bucket owner. If the account ID that you provide does not match the actual owner of the bucket, the request fails with the HTTP status code <code>403 Forbidden</code> (access denied).</p>
153    pub fn get_expected_bucket_owner(&self) -> &::std::option::Option<::std::string::String> {
154        self.inner.get_expected_bucket_owner()
155    }
156}
aws_sdk_s3/operation/get_public_access_block/builders.rs

aws_sdk_s3/operation/get_public_access_block/
builders.rs
