aws_sdk_wafv2/operation/update_regex_pattern_set/

builders.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::update_regex_pattern_set::_update_regex_pattern_set_output::UpdateRegexPatternSetOutputBuilder;

pub use crate::operation::update_regex_pattern_set::_update_regex_pattern_set_input::UpdateRegexPatternSetInputBuilder;

impl crate::operation::update_regex_pattern_set::builders::UpdateRegexPatternSetInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSetOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::update_regex_pattern_set::UpdateRegexPatternSetError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.update_regex_pattern_set();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `UpdateRegexPatternSet`.
///
/// <p>Updates the specified <code>RegexPatternSet</code>.</p><note>
/// <p>This operation completely replaces the mutable specifications that you already have for the regex pattern set with the ones that you provide to this call.</p>
/// <p>To modify a regex pattern set, do the following:</p>
/// <ol>
/// <li>
/// <p>Retrieve it by calling <code>GetRegexPatternSet</code></p></li>
/// <li>
/// <p>Update its settings as needed</p></li>
/// <li>
/// <p>Provide the complete regex pattern set specification to this call</p></li>
/// </ol>
/// </note>
/// <p><b>Temporary inconsistencies during updates</b></p>
/// <p>When you create or change a web ACL or other WAF resources, the changes take a small amount of time to propagate to all areas where the resources are stored. The propagation time can be from a few seconds to a number of minutes.</p>
/// <p>The following are examples of the temporary inconsistencies that you might notice during change propagation:</p>
/// <ul>
/// <li>
/// <p>After you create a web ACL, if you try to associate it with a resource, you might get an exception indicating that the web ACL is unavailable.</p></li>
/// <li>
/// <p>After you add a rule group to a web ACL, the new rule group rules might be in effect in one area where the web ACL is used and not in another.</p></li>
/// <li>
/// <p>After you change a rule action setting, you might see the old action in some places and the new action in others.</p></li>
/// <li>
/// <p>After you add an IP address to an IP set that is in use in a blocking rule, the new address might be blocked in one area while still allowed in another.</p></li>
/// </ul>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct UpdateRegexPatternSetFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::update_regex_pattern_set::builders::UpdateRegexPatternSetInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSetOutput,
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSetError,
    > for UpdateRegexPatternSetFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::update_regex_pattern_set::UpdateRegexPatternSetOutput,
            crate::operation::update_regex_pattern_set::UpdateRegexPatternSetError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl UpdateRegexPatternSetFluentBuilder {
    /// Creates a new `UpdateRegexPatternSetFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the UpdateRegexPatternSet as a reference.
    pub fn as_input(&self) -> &crate::operation::update_regex_pattern_set::builders::UpdateRegexPatternSetInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSetOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::update_regex_pattern_set::UpdateRegexPatternSetError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::update_regex_pattern_set::UpdateRegexPatternSet::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSet::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSetOutput,
        crate::operation::update_regex_pattern_set::UpdateRegexPatternSetError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The name of the set. You cannot change the name after you create the set.</p>
    pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.name(input.into());
        self
    }
    /// <p>The name of the set. You cannot change the name after you create the set.</p>
    pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_name(input);
        self
    }
    /// <p>The name of the set. You cannot change the name after you create the set.</p>
    pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_name()
    }
    /// <p>Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.</p>
    /// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
    /// <ul>
    /// <li>
    /// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
    /// <li>
    /// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
    /// </ul>
    pub fn scope(mut self, input: crate::types::Scope) -> Self {
        self.inner = self.inner.scope(input);
        self
    }
    /// <p>Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.</p>
    /// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
    /// <ul>
    /// <li>
    /// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
    /// <li>
    /// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
    /// </ul>
    pub fn set_scope(mut self, input: ::std::option::Option<crate::types::Scope>) -> Self {
        self.inner = self.inner.set_scope(input);
        self
    }
    /// <p>Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.</p>
    /// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
    /// <ul>
    /// <li>
    /// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
    /// <li>
    /// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
    /// </ul>
    pub fn get_scope(&self) -> &::std::option::Option<crate::types::Scope> {
        self.inner.get_scope()
    }
    /// <p>A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.</p>
    pub fn id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.id(input.into());
        self
    }
    /// <p>A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.</p>
    pub fn set_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_id(input);
        self
    }
    /// <p>A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.</p>
    pub fn get_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_id()
    }
    /// <p>A description of the set that helps with identification.</p>
    pub fn description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.description(input.into());
        self
    }
    /// <p>A description of the set that helps with identification.</p>
    pub fn set_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_description(input);
        self
    }
    /// <p>A description of the set that helps with identification.</p>
    pub fn get_description(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_description()
    }
    ///
    /// Appends an item to `RegularExpressionList`.
    ///
    /// To override the contents of this collection use [`set_regular_expression_list`](Self::set_regular_expression_list).
    ///
    /// <p></p>
    pub fn regular_expression_list(mut self, input: crate::types::Regex) -> Self {
        self.inner = self.inner.regular_expression_list(input);
        self
    }
    /// <p></p>
    pub fn set_regular_expression_list(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Regex>>) -> Self {
        self.inner = self.inner.set_regular_expression_list(input);
        self
    }
    /// <p></p>
    pub fn get_regular_expression_list(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Regex>> {
        self.inner.get_regular_expression_list()
    }
    /// <p>A token used for optimistic locking. WAF returns a token to your <code>get</code> and <code>list</code> requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like <code>update</code> and <code>delete</code>. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a <code>WAFOptimisticLockException</code>. If this happens, perform another <code>get</code>, and use the new token returned by that operation.</p>
    pub fn lock_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.lock_token(input.into());
        self
    }
    /// <p>A token used for optimistic locking. WAF returns a token to your <code>get</code> and <code>list</code> requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like <code>update</code> and <code>delete</code>. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a <code>WAFOptimisticLockException</code>. If this happens, perform another <code>get</code>, and use the new token returned by that operation.</p>
    pub fn set_lock_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_lock_token(input);
        self
    }
    /// <p>A token used for optimistic locking. WAF returns a token to your <code>get</code> and <code>list</code> requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like <code>update</code> and <code>delete</code>. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a <code>WAFOptimisticLockException</code>. If this happens, perform another <code>get</code>, and use the new token returned by that operation.</p>
    pub fn get_lock_token(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_lock_token()
    }
}