pub struct WindowWrapper<W> { /* private fields */ }Expand description
A wrapper over a window.
This allows us to extend the lifetime of the window, so it doesn’t get eagerly dropped while a pipelined renderer still has frames in flight that need to draw to it.
This is achieved by storing a shared reference to the window in the RawHandleWrapper,
which gets picked up by the renderer during extraction.
Implementations§
Source§impl<W: Send + Sync + 'static> WindowWrapper<W>
impl<W: Send + Sync + 'static> WindowWrapper<W>
Sourcepub fn new(window: W) -> WindowWrapper<W>
pub fn new(window: W) -> WindowWrapper<W>
Creates a WindowWrapper from a window.
Trait Implementations§
Source§impl<W: Debug> Debug for WindowWrapper<W>
impl<W: Debug> Debug for WindowWrapper<W>
Auto Trait Implementations§
impl<W> Freeze for WindowWrapper<W>
impl<W> !RefUnwindSafe for WindowWrapper<W>
impl<W> Send for WindowWrapper<W>where
W: Send,
impl<W> Sync for WindowWrapper<W>where
W: Sync,
impl<W> Unpin for WindowWrapper<W>where
W: Unpin,
impl<W> !UnwindSafe for WindowWrapper<W>
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<T, C, D> Curve<T> for D
impl<T, C, D> Curve<T> for D
Source§fn sample_unchecked(&self, t: f32) -> T
fn sample_unchecked(&self, t: f32) -> T
Sample a point on this curve at the parameter value
t, extracting the associated value.
This is the unchecked version of sampling, which should only be used if the sample time t
is already known to lie within the curve’s domain. Read moreSource§fn sample(&self, t: f32) -> Option<T>
fn sample(&self, t: f32) -> Option<T>
Sample a point on this curve at the parameter value
t, returning None if the point is
outside of the curve’s domain.Source§fn sample_clamped(&self, t: f32) -> T
fn sample_clamped(&self, t: f32) -> T
Sample a point on this curve at the parameter value
t, clamping t to lie inside the
domain of the curve.Source§fn sample_iter(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = Option<T>>where
Self: Sized,
fn sample_iter(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = Option<T>>where
Self: Sized,
Sample a collection of
n >= 0 points on this curve at the parameter values t_n,
returning None if the point is outside of the curve’s domain. Read moreSource§fn sample_iter_unchecked(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>where
Self: Sized,
fn sample_iter_unchecked(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>where
Self: Sized,
Sample a collection of
n >= 0 points on this curve at the parameter values t_n,
extracting the associated values. This is the unchecked version of sampling, which should
only be used if the sample times t_n are already known to lie within the curve’s domain. Read moreSource§fn sample_iter_clamped(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>where
Self: Sized,
fn sample_iter_clamped(
&self,
iter: impl IntoIterator<Item = f32>,
) -> impl Iterator<Item = T>where
Self: Sized,
Sample a collection of
n >= 0 points on this curve at the parameter values t_n,
clamping t_n to lie inside the domain of the curve. Read moreSource§fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>
fn map<S, F>(self, f: F) -> MapCurve<T, S, Self, F>
Create a new curve by mapping the values of this curve via a function
f; i.e., if the
sample at time t for this curve is x, the value at time t on the new curve will be
f(x).Source§fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
fn reparametrize<F>(self, domain: Interval, f: F) -> ReparamCurve<T, Self, F>
Create a new
Curve whose parameter space is related to the parameter space of this curve
by f. For each time t, the sample from the new curve at time t is the sample from
this curve at time f(t). The given domain will be the domain of the new curve. The
function f is expected to take domain into self.domain(). Read moreSource§fn reparametrize_linear(
self,
domain: Interval,
) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>where
Self: Sized,
fn reparametrize_linear(
self,
domain: Interval,
) -> Result<LinearReparamCurve<T, Self>, LinearReparamError>where
Self: Sized,
Linearly reparametrize this
Curve, producing a new curve whose domain is the given
domain instead of the current one. This operation is only valid for curves with bounded
domains; if either this curve’s domain or the given domain is unbounded, an error is
returned.Source§fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
fn reparametrize_by_curve<C>(self, other: C) -> CurveReparamCurve<T, Self, C>
Source§fn graph(self) -> GraphCurve<T, Self>where
Self: Sized,
fn graph(self) -> GraphCurve<T, Self>where
Self: Sized,
Source§fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>
fn chain<C>(self, other: C) -> Result<ChainCurve<T, Self, C>, ChainError>
Source§fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>where
Self: Sized,
fn reverse(self) -> Result<ReverseCurve<T, Self>, ReverseError>where
Self: Sized,
Source§fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>where
Self: Sized,
fn repeat(self, count: usize) -> Result<RepeatCurve<T, Self>, RepeatError>where
Self: Sized,
Source§fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>where
Self: Sized,
fn forever(self) -> Result<ForeverCurve<T, Self>, RepeatError>where
Self: Sized,
Source§fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>where
Self: Sized,
fn ping_pong(self) -> Result<PingPongCurve<T, Self>, PingPongError>where
Self: Sized,
Source§fn chain_continue<C>(
self,
other: C,
) -> Result<ContinuationCurve<T, Self, C>, ChainError>
fn chain_continue<C>( self, other: C, ) -> Result<ContinuationCurve<T, Self, C>, ChainError>
Source§fn resample<I>(
&self,
segments: usize,
interpolation: I,
) -> Result<SampleCurve<T, I>, ResamplingError>
fn resample<I>( &self, segments: usize, interpolation: I, ) -> Result<SampleCurve<T, I>, ResamplingError>
Resample this
Curve to produce a new one that is defined by interpolation over equally
spaced sample values, using the provided interpolation to interpolate between adjacent samples.
The curve is interpolated on segments segments between samples. For example, if segments is 1,
only the start and end points of the curve are used as samples; if segments is 2, a sample at
the midpoint is taken as well, and so on. If segments is zero, or if this curve has an unbounded
domain, then a ResamplingError is returned. Read moreSource§fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
Self: Sized,
T: StableInterpolate,
fn resample_auto(
&self,
segments: usize,
) -> Result<SampleAutoCurve<T>, ResamplingError>where
Self: Sized,
T: StableInterpolate,
Resample this
Curve to produce a new one that is defined by interpolation over equally
spaced sample values, using automatic interpolation to interpolate between adjacent samples.
The curve is interpolated on segments segments between samples. For example, if segments is 1,
only the start and end points of the curve are used as samples; if segments is 2, a sample at
the midpoint is taken as well, and so on. If segments is zero, or if this curve has an unbounded
domain, then a ResamplingError is returned.Source§fn samples(
&self,
samples: usize,
) -> Result<impl Iterator<Item = T>, ResamplingError>where
Self: Sized,
fn samples(
&self,
samples: usize,
) -> Result<impl Iterator<Item = T>, ResamplingError>where
Self: Sized,
Extract an iterator over evenly-spaced samples from this curve. If
samples is less than 2
or if this curve has unbounded domain, then an error is returned instead.Source§fn resample_uneven<I>(
&self,
sample_times: impl IntoIterator<Item = f32>,
interpolation: I,
) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
fn resample_uneven<I>( &self, sample_times: impl IntoIterator<Item = f32>, interpolation: I, ) -> Result<UnevenSampleCurve<T, I>, ResamplingError>
Source§fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
Self: Sized,
T: StableInterpolate,
fn resample_uneven_auto(
&self,
sample_times: impl IntoIterator<Item = f32>,
) -> Result<UnevenSampleAutoCurve<T>, ResamplingError>where
Self: Sized,
T: StableInterpolate,
Resample this
Curve to produce a new one that is defined by automatic interpolation over
samples taken at the given set of times. The given sample_times are expected to contain at least
two valid times within the curve’s domain interval. Read moreSource§impl<T> Downcast for Twhere
T: Any,
impl<T> Downcast for Twhere
T: Any,
Source§fn into_any(self: Box<T>) -> Box<dyn Any>
fn into_any(self: Box<T>) -> Box<dyn Any>
Convert
Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can
then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.Source§fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>
Convert
Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be
further downcast into Rc<ConcreteType> where ConcreteType implements Trait.Source§fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert
&Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &Any’s vtable from &Trait’s.Source§fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert
&mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot
generate &mut Any’s vtable from &mut Trait’s.Source§impl<T> DowncastSync for T
impl<T> DowncastSync for T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more