#[doc = "Register `gpio_set_0` reader"]
pub type R = crate::R<GPIO_SET_0_SPEC>;
#[doc = "Register `gpio_set_0` writer"]
pub type W = crate::W<GPIO_SET_0_SPEC>;
#[doc = "Field `gpio_0_set` reader - "]
pub type GPIO_0_SET_R = crate::BitReader;
#[doc = "Field `gpio_0_set` writer - "]
pub type GPIO_0_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_1_set` reader - "]
pub type GPIO_1_SET_R = crate::BitReader;
#[doc = "Field `gpio_1_set` writer - "]
pub type GPIO_1_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_2_set` reader - "]
pub type GPIO_2_SET_R = crate::BitReader;
#[doc = "Field `gpio_2_set` writer - "]
pub type GPIO_2_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_3_set` reader - "]
pub type GPIO_3_SET_R = crate::BitReader;
#[doc = "Field `gpio_3_set` writer - "]
pub type GPIO_3_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_4_set` reader - "]
pub type GPIO_4_SET_R = crate::BitReader;
#[doc = "Field `gpio_4_set` writer - "]
pub type GPIO_4_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_5_set` reader - "]
pub type GPIO_5_SET_R = crate::BitReader;
#[doc = "Field `gpio_5_set` writer - "]
pub type GPIO_5_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_6_set` reader - "]
pub type GPIO_6_SET_R = crate::BitReader;
#[doc = "Field `gpio_6_set` writer - "]
pub type GPIO_6_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_7_set` reader - "]
pub type GPIO_7_SET_R = crate::BitReader;
#[doc = "Field `gpio_7_set` writer - "]
pub type GPIO_7_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_8_set` reader - "]
pub type GPIO_8_SET_R = crate::BitReader;
#[doc = "Field `gpio_8_set` writer - "]
pub type GPIO_8_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_9_set` reader - "]
pub type GPIO_9_SET_R = crate::BitReader;
#[doc = "Field `gpio_9_set` writer - "]
pub type GPIO_9_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_10_set` reader - "]
pub type GPIO_10_SET_R = crate::BitReader;
#[doc = "Field `gpio_10_set` writer - "]
pub type GPIO_10_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_11_set` reader - "]
pub type GPIO_11_SET_R = crate::BitReader;
#[doc = "Field `gpio_11_set` writer - "]
pub type GPIO_11_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_12_set` reader - "]
pub type GPIO_12_SET_R = crate::BitReader;
#[doc = "Field `gpio_12_set` writer - "]
pub type GPIO_12_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_13_set` reader - "]
pub type GPIO_13_SET_R = crate::BitReader;
#[doc = "Field `gpio_13_set` writer - "]
pub type GPIO_13_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_14_set` reader - "]
pub type GPIO_14_SET_R = crate::BitReader;
#[doc = "Field `gpio_14_set` writer - "]
pub type GPIO_14_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_15_set` reader - "]
pub type GPIO_15_SET_R = crate::BitReader;
#[doc = "Field `gpio_15_set` writer - "]
pub type GPIO_15_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_16_set` reader - "]
pub type GPIO_16_SET_R = crate::BitReader;
#[doc = "Field `gpio_16_set` writer - "]
pub type GPIO_16_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_17_set` reader - "]
pub type GPIO_17_SET_R = crate::BitReader;
#[doc = "Field `gpio_17_set` writer - "]
pub type GPIO_17_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_18_set` reader - "]
pub type GPIO_18_SET_R = crate::BitReader;
#[doc = "Field `gpio_18_set` writer - "]
pub type GPIO_18_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_19_set` reader - "]
pub type GPIO_19_SET_R = crate::BitReader;
#[doc = "Field `gpio_19_set` writer - "]
pub type GPIO_19_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_20_set` reader - "]
pub type GPIO_20_SET_R = crate::BitReader;
#[doc = "Field `gpio_20_set` writer - "]
pub type GPIO_20_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_21_set` reader - "]
pub type GPIO_21_SET_R = crate::BitReader;
#[doc = "Field `gpio_21_set` writer - "]
pub type GPIO_21_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_22_set` reader - "]
pub type GPIO_22_SET_R = crate::BitReader;
#[doc = "Field `gpio_22_set` writer - "]
pub type GPIO_22_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_23_set` reader - "]
pub type GPIO_23_SET_R = crate::BitReader;
#[doc = "Field `gpio_23_set` writer - "]
pub type GPIO_23_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_24_set` reader - "]
pub type GPIO_24_SET_R = crate::BitReader;
#[doc = "Field `gpio_24_set` writer - "]
pub type GPIO_24_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_25_set` reader - "]
pub type GPIO_25_SET_R = crate::BitReader;
#[doc = "Field `gpio_25_set` writer - "]
pub type GPIO_25_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_26_set` reader - "]
pub type GPIO_26_SET_R = crate::BitReader;
#[doc = "Field `gpio_26_set` writer - "]
pub type GPIO_26_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_27_set` reader - "]
pub type GPIO_27_SET_R = crate::BitReader;
#[doc = "Field `gpio_27_set` writer - "]
pub type GPIO_27_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_28_set` reader - "]
pub type GPIO_28_SET_R = crate::BitReader;
#[doc = "Field `gpio_28_set` writer - "]
pub type GPIO_28_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_29_set` reader - "]
pub type GPIO_29_SET_R = crate::BitReader;
#[doc = "Field `gpio_29_set` writer - "]
pub type GPIO_29_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_30_set` reader - "]
pub type GPIO_30_SET_R = crate::BitReader;
#[doc = "Field `gpio_30_set` writer - "]
pub type GPIO_30_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `gpio_31_set` reader - "]
pub type GPIO_31_SET_R = crate::BitReader;
#[doc = "Field `gpio_31_set` writer - "]
pub type GPIO_31_SET_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 0"]
#[inline(always)]
pub fn gpio_0_set(&self) -> GPIO_0_SET_R {
GPIO_0_SET_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1"]
#[inline(always)]
pub fn gpio_1_set(&self) -> GPIO_1_SET_R {
GPIO_1_SET_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2"]
#[inline(always)]
pub fn gpio_2_set(&self) -> GPIO_2_SET_R {
GPIO_2_SET_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3"]
#[inline(always)]
pub fn gpio_3_set(&self) -> GPIO_3_SET_R {
GPIO_3_SET_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4"]
#[inline(always)]
pub fn gpio_4_set(&self) -> GPIO_4_SET_R {
GPIO_4_SET_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5"]
#[inline(always)]
pub fn gpio_5_set(&self) -> GPIO_5_SET_R {
GPIO_5_SET_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6"]
#[inline(always)]
pub fn gpio_6_set(&self) -> GPIO_6_SET_R {
GPIO_6_SET_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7"]
#[inline(always)]
pub fn gpio_7_set(&self) -> GPIO_7_SET_R {
GPIO_7_SET_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8"]
#[inline(always)]
pub fn gpio_8_set(&self) -> GPIO_8_SET_R {
GPIO_8_SET_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9"]
#[inline(always)]
pub fn gpio_9_set(&self) -> GPIO_9_SET_R {
GPIO_9_SET_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10"]
#[inline(always)]
pub fn gpio_10_set(&self) -> GPIO_10_SET_R {
GPIO_10_SET_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11"]
#[inline(always)]
pub fn gpio_11_set(&self) -> GPIO_11_SET_R {
GPIO_11_SET_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12"]
#[inline(always)]
pub fn gpio_12_set(&self) -> GPIO_12_SET_R {
GPIO_12_SET_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13"]
#[inline(always)]
pub fn gpio_13_set(&self) -> GPIO_13_SET_R {
GPIO_13_SET_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14"]
#[inline(always)]
pub fn gpio_14_set(&self) -> GPIO_14_SET_R {
GPIO_14_SET_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15"]
#[inline(always)]
pub fn gpio_15_set(&self) -> GPIO_15_SET_R {
GPIO_15_SET_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16"]
#[inline(always)]
pub fn gpio_16_set(&self) -> GPIO_16_SET_R {
GPIO_16_SET_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 17"]
#[inline(always)]
pub fn gpio_17_set(&self) -> GPIO_17_SET_R {
GPIO_17_SET_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 18"]
#[inline(always)]
pub fn gpio_18_set(&self) -> GPIO_18_SET_R {
GPIO_18_SET_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19"]
#[inline(always)]
pub fn gpio_19_set(&self) -> GPIO_19_SET_R {
GPIO_19_SET_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20"]
#[inline(always)]
pub fn gpio_20_set(&self) -> GPIO_20_SET_R {
GPIO_20_SET_R::new(((self.bits >> 20) & 1) != 0)
}
#[doc = "Bit 21"]
#[inline(always)]
pub fn gpio_21_set(&self) -> GPIO_21_SET_R {
GPIO_21_SET_R::new(((self.bits >> 21) & 1) != 0)
}
#[doc = "Bit 22"]
#[inline(always)]
pub fn gpio_22_set(&self) -> GPIO_22_SET_R {
GPIO_22_SET_R::new(((self.bits >> 22) & 1) != 0)
}
#[doc = "Bit 23"]
#[inline(always)]
pub fn gpio_23_set(&self) -> GPIO_23_SET_R {
GPIO_23_SET_R::new(((self.bits >> 23) & 1) != 0)
}
#[doc = "Bit 24"]
#[inline(always)]
pub fn gpio_24_set(&self) -> GPIO_24_SET_R {
GPIO_24_SET_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 25"]
#[inline(always)]
pub fn gpio_25_set(&self) -> GPIO_25_SET_R {
GPIO_25_SET_R::new(((self.bits >> 25) & 1) != 0)
}
#[doc = "Bit 26"]
#[inline(always)]
pub fn gpio_26_set(&self) -> GPIO_26_SET_R {
GPIO_26_SET_R::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27"]
#[inline(always)]
pub fn gpio_27_set(&self) -> GPIO_27_SET_R {
GPIO_27_SET_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28"]
#[inline(always)]
pub fn gpio_28_set(&self) -> GPIO_28_SET_R {
GPIO_28_SET_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29"]
#[inline(always)]
pub fn gpio_29_set(&self) -> GPIO_29_SET_R {
GPIO_29_SET_R::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bit 30"]
#[inline(always)]
pub fn gpio_30_set(&self) -> GPIO_30_SET_R {
GPIO_30_SET_R::new(((self.bits >> 30) & 1) != 0)
}
#[doc = "Bit 31"]
#[inline(always)]
pub fn gpio_31_set(&self) -> GPIO_31_SET_R {
GPIO_31_SET_R::new(((self.bits >> 31) & 1) != 0)
}
}
impl W {
#[doc = "Bit 0"]
#[inline(always)]
#[must_use]
pub fn gpio_0_set(&mut self) -> GPIO_0_SET_W<GPIO_SET_0_SPEC> {
GPIO_0_SET_W::new(self, 0)
}
#[doc = "Bit 1"]
#[inline(always)]
#[must_use]
pub fn gpio_1_set(&mut self) -> GPIO_1_SET_W<GPIO_SET_0_SPEC> {
GPIO_1_SET_W::new(self, 1)
}
#[doc = "Bit 2"]
#[inline(always)]
#[must_use]
pub fn gpio_2_set(&mut self) -> GPIO_2_SET_W<GPIO_SET_0_SPEC> {
GPIO_2_SET_W::new(self, 2)
}
#[doc = "Bit 3"]
#[inline(always)]
#[must_use]
pub fn gpio_3_set(&mut self) -> GPIO_3_SET_W<GPIO_SET_0_SPEC> {
GPIO_3_SET_W::new(self, 3)
}
#[doc = "Bit 4"]
#[inline(always)]
#[must_use]
pub fn gpio_4_set(&mut self) -> GPIO_4_SET_W<GPIO_SET_0_SPEC> {
GPIO_4_SET_W::new(self, 4)
}
#[doc = "Bit 5"]
#[inline(always)]
#[must_use]
pub fn gpio_5_set(&mut self) -> GPIO_5_SET_W<GPIO_SET_0_SPEC> {
GPIO_5_SET_W::new(self, 5)
}
#[doc = "Bit 6"]
#[inline(always)]
#[must_use]
pub fn gpio_6_set(&mut self) -> GPIO_6_SET_W<GPIO_SET_0_SPEC> {
GPIO_6_SET_W::new(self, 6)
}
#[doc = "Bit 7"]
#[inline(always)]
#[must_use]
pub fn gpio_7_set(&mut self) -> GPIO_7_SET_W<GPIO_SET_0_SPEC> {
GPIO_7_SET_W::new(self, 7)
}
#[doc = "Bit 8"]
#[inline(always)]
#[must_use]
pub fn gpio_8_set(&mut self) -> GPIO_8_SET_W<GPIO_SET_0_SPEC> {
GPIO_8_SET_W::new(self, 8)
}
#[doc = "Bit 9"]
#[inline(always)]
#[must_use]
pub fn gpio_9_set(&mut self) -> GPIO_9_SET_W<GPIO_SET_0_SPEC> {
GPIO_9_SET_W::new(self, 9)
}
#[doc = "Bit 10"]
#[inline(always)]
#[must_use]
pub fn gpio_10_set(&mut self) -> GPIO_10_SET_W<GPIO_SET_0_SPEC> {
GPIO_10_SET_W::new(self, 10)
}
#[doc = "Bit 11"]
#[inline(always)]
#[must_use]
pub fn gpio_11_set(&mut self) -> GPIO_11_SET_W<GPIO_SET_0_SPEC> {
GPIO_11_SET_W::new(self, 11)
}
#[doc = "Bit 12"]
#[inline(always)]
#[must_use]
pub fn gpio_12_set(&mut self) -> GPIO_12_SET_W<GPIO_SET_0_SPEC> {
GPIO_12_SET_W::new(self, 12)
}
#[doc = "Bit 13"]
#[inline(always)]
#[must_use]
pub fn gpio_13_set(&mut self) -> GPIO_13_SET_W<GPIO_SET_0_SPEC> {
GPIO_13_SET_W::new(self, 13)
}
#[doc = "Bit 14"]
#[inline(always)]
#[must_use]
pub fn gpio_14_set(&mut self) -> GPIO_14_SET_W<GPIO_SET_0_SPEC> {
GPIO_14_SET_W::new(self, 14)
}
#[doc = "Bit 15"]
#[inline(always)]
#[must_use]
pub fn gpio_15_set(&mut self) -> GPIO_15_SET_W<GPIO_SET_0_SPEC> {
GPIO_15_SET_W::new(self, 15)
}
#[doc = "Bit 16"]
#[inline(always)]
#[must_use]
pub fn gpio_16_set(&mut self) -> GPIO_16_SET_W<GPIO_SET_0_SPEC> {
GPIO_16_SET_W::new(self, 16)
}
#[doc = "Bit 17"]
#[inline(always)]
#[must_use]
pub fn gpio_17_set(&mut self) -> GPIO_17_SET_W<GPIO_SET_0_SPEC> {
GPIO_17_SET_W::new(self, 17)
}
#[doc = "Bit 18"]
#[inline(always)]
#[must_use]
pub fn gpio_18_set(&mut self) -> GPIO_18_SET_W<GPIO_SET_0_SPEC> {
GPIO_18_SET_W::new(self, 18)
}
#[doc = "Bit 19"]
#[inline(always)]
#[must_use]
pub fn gpio_19_set(&mut self) -> GPIO_19_SET_W<GPIO_SET_0_SPEC> {
GPIO_19_SET_W::new(self, 19)
}
#[doc = "Bit 20"]
#[inline(always)]
#[must_use]
pub fn gpio_20_set(&mut self) -> GPIO_20_SET_W<GPIO_SET_0_SPEC> {
GPIO_20_SET_W::new(self, 20)
}
#[doc = "Bit 21"]
#[inline(always)]
#[must_use]
pub fn gpio_21_set(&mut self) -> GPIO_21_SET_W<GPIO_SET_0_SPEC> {
GPIO_21_SET_W::new(self, 21)
}
#[doc = "Bit 22"]
#[inline(always)]
#[must_use]
pub fn gpio_22_set(&mut self) -> GPIO_22_SET_W<GPIO_SET_0_SPEC> {
GPIO_22_SET_W::new(self, 22)
}
#[doc = "Bit 23"]
#[inline(always)]
#[must_use]
pub fn gpio_23_set(&mut self) -> GPIO_23_SET_W<GPIO_SET_0_SPEC> {
GPIO_23_SET_W::new(self, 23)
}
#[doc = "Bit 24"]
#[inline(always)]
#[must_use]
pub fn gpio_24_set(&mut self) -> GPIO_24_SET_W<GPIO_SET_0_SPEC> {
GPIO_24_SET_W::new(self, 24)
}
#[doc = "Bit 25"]
#[inline(always)]
#[must_use]
pub fn gpio_25_set(&mut self) -> GPIO_25_SET_W<GPIO_SET_0_SPEC> {
GPIO_25_SET_W::new(self, 25)
}
#[doc = "Bit 26"]
#[inline(always)]
#[must_use]
pub fn gpio_26_set(&mut self) -> GPIO_26_SET_W<GPIO_SET_0_SPEC> {
GPIO_26_SET_W::new(self, 26)
}
#[doc = "Bit 27"]
#[inline(always)]
#[must_use]
pub fn gpio_27_set(&mut self) -> GPIO_27_SET_W<GPIO_SET_0_SPEC> {
GPIO_27_SET_W::new(self, 27)
}
#[doc = "Bit 28"]
#[inline(always)]
#[must_use]
pub fn gpio_28_set(&mut self) -> GPIO_28_SET_W<GPIO_SET_0_SPEC> {
GPIO_28_SET_W::new(self, 28)
}
#[doc = "Bit 29"]
#[inline(always)]
#[must_use]
pub fn gpio_29_set(&mut self) -> GPIO_29_SET_W<GPIO_SET_0_SPEC> {
GPIO_29_SET_W::new(self, 29)
}
#[doc = "Bit 30"]
#[inline(always)]
#[must_use]
pub fn gpio_30_set(&mut self) -> GPIO_30_SET_W<GPIO_SET_0_SPEC> {
GPIO_30_SET_W::new(self, 30)
}
#[doc = "Bit 31"]
#[inline(always)]
#[must_use]
pub fn gpio_31_set(&mut self) -> GPIO_31_SET_W<GPIO_SET_0_SPEC> {
GPIO_31_SET_W::new(self, 31)
}
#[doc = r" Writes raw bits to the register."]
#[doc = r""]
#[doc = r" # Safety"]
#[doc = r""]
#[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
}
#[doc = "Set pin output value to high (GPIO0 ~ GPIO31)\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gpio_set_0::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gpio_set_0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct GPIO_SET_0_SPEC;
impl crate::RegisterSpec for GPIO_SET_0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`gpio_set_0::R`](R) reader structure"]
impl crate::Readable for GPIO_SET_0_SPEC {}
#[doc = "`write(|w| ..)` method takes [`gpio_set_0::W`](W) writer structure"]
impl crate::Writable for GPIO_SET_0_SPEC {
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets gpio_set_0 to value 0"]
impl crate::Resettable for GPIO_SET_0_SPEC {
const RESET_VALUE: Self::Ux = 0;
}