//! Startup code and minimal runtime for Cortex-M microcontrollers
//!
//! This crate contains all the required parts to build a `no_std` application (binary crate) that
//! targets a Cortex-M microcontroller.
//!
//! # Features
//!
//! This crates takes care of:
//!
//! - The memory layout of the program. In particular, it populates the vector table so the device
//! can boot correctly, and properly dispatch exceptions and interrupts.
//!
//! - Initializing `static` variables before the program entry point.
//!
//! - Enabling the FPU before the program entry point if the target is `thumbv7em-none-eabihf`.
//!
//! This crate also provides the following attributes:
//!
//! - [`#[entry]`][attr-entry] to declare the entry point of the program
//! - [`#[exception]`][attr-exception] to override an exception handler. If not overridden all
//!   exception handlers default to an infinite loop.
//! - [`#[pre_init]`][attr-pre_init] to run code *before* `static` variables are initialized
//!
//! This crate also implements a related attribute called `#[interrupt]`, which allows you
//! to define interrupt handlers. However, since which interrupts are available depends on the
//! microcontroller in use, this attribute should be re-exported and used from a device crate.
//!
//! The documentation for these attributes can be found in the [Attribute Macros](#attributes)
//! section.
//!
//! # Requirements
//!
//! ## `memory.x`
//!
//! This crate expects the user, or some other crate, to provide the memory layout of the target
//! device via a linker script named `memory.x`. This section covers the contents of `memory.x`
//!
//! ### `MEMORY`
//!
//! The linker script must specify the memory available in the device as, at least, two `MEMORY`
//! regions: one named `FLASH` and one named `RAM`. The `.text` and `.rodata` sections of the
//! program will be placed in the `FLASH` region, whereas the `.bss` and `.data` sections, as well
//! as the heap,will be placed in the `RAM` region.
//!
//! ``` text
//! /* Linker script for the STM32F103C8T6 */
//! MEMORY
//! {
//!   FLASH : ORIGIN = 0x08000000, LENGTH = 64K
//!   RAM : ORIGIN = 0x20000000, LENGTH = 20K
//! }
//! ```
//!
//! ### `_stack_start`
//!
//! This optional symbol can be used to indicate where the call stack of the program should be
//! placed. If this symbol is not used then the stack will be placed at the *end* of the `RAM`
//! region -- the stack grows downwards towards smaller address. This symbol can be used to place
//! the stack in a different memory region, for example:
//!
//! ``` text
//! /* Linker script for the STM32F303VCT6 */
//! MEMORY
//! {
//!     FLASH : ORIGIN = 0x08000000, LENGTH = 256K
//!
//!     /* .bss, .data and the heap go in this region */
//!     RAM : ORIGIN = 0x20000000, LENGTH = 40K
//!
//!     /* Core coupled (faster) RAM dedicated to hold the stack */
//!     CCRAM : ORIGIN = 0x10000000, LENGTH = 8K
//! }
//!
//! _stack_start = ORIGIN(CCRAM) + LENGTH(CCRAM);
//! ```
//!
//! ### `_stext`
//!
//! This optional symbol can be used to control where the `.text` section is placed. If omitted the
//! `.text` section will be placed right after the vector table, which is placed at the beginning of
//! `FLASH`. Some devices store settings like Flash configuration right after the vector table;
//! for these devices one must place the `.text` section after this configuration section --
//! `_stext` can be used for this purpose.
//!
//! ``` text
//! MEMORY
//! {
//!   /* .. */
//! }
//!
//! /* The device stores Flash configuration in 0x400-0x40C so we place .text after that */
//! _stext = ORIGIN(FLASH) + 0x40C
//! ```
//!
//! # An example
//!
//! This section presents a minimal application built on top of `cortex-m-rt`. Apart from the
//! mandatory `memory.x` linker script describing the memory layout of the device, the hard fault
//! handler and the default exception handler must also be defined somewhere in the dependency
//! graph (see [`#[exception]`]). In this example we define them in the binary crate:
//!
//! ``` ignore
//! // IMPORTANT the standard `main` interface is not used because it requires nightly
//! #![no_main]
//! #![no_std]
//!
//! extern crate cortex_m_rt as rt;
//!
//! // makes `panic!` print messages to the host stderr using semihosting
//! extern crate panic_semihosting;
//!
//! use rt::entry;
//!
//! // use `main` as the entry point of this application
//! // `main` is not allowed to return
//! #[entry]
//! fn main() -> ! {
//!     // initialization
//!
//!     loop {
//!         // application logic
//!     }
//! }
//! ```
//!
//! To actually build this program you need to place a `memory.x` linker script somewhere the linker
//! can find it, e.g. in the current directory; and then link the program using `cortex-m-rt`'s
//! linker script: `link.x`. The required steps are shown below:
//!
//! ``` text
//! $ cat > memory.x <<EOF
//! /* Linker script for the STM32F103C8T6 */
//! MEMORY
//! {
//!   FLASH : ORIGIN = 0x08000000, LENGTH = 64K
//!   RAM : ORIGIN = 0x20000000, LENGTH = 20K
//! }
//! EOF
//!
//! $ cargo rustc --target thumbv7m-none-eabi -- \
//!       -C link-arg=-nostartfiles -C link-arg=-Tlink.x
//!
//! $ file target/thumbv7m-none-eabi/debug/app
//! app: ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), statically linked, (..)
//! ```
//!
//! # Optional features
//!
//! ## `device`
//!
//! If this feature is disabled then this crate populates the whole vector table. All the interrupts
//! in the vector table, even the ones unused by the target device, will be bound to the default
//! exception handler. This makes the final application device agnostic: you will be able to run it
//! on any Cortex-M device -- provided that you correctly specified its memory layout in `memory.x`
//! -- without hitting undefined behavior.
//!
//! If this feature is enabled then the interrupts section of the vector table is left unpopulated
//! and some other crate, or the user, will have to populate it. This mode is meant to be used in
//! conjunction with crates generated using `svd2rust`. Those *device crates* will populate the
//! missing part of the vector table when their `"rt"` feature is enabled.
//!
//! # Inspection
//!
//! This section covers how to inspect a binary that builds on top of `cortex-m-rt`.
//!
//! ## Sections (`size`)
//!
//! `cortex-m-rt` uses standard sections like `.text`, `.rodata`, `.bss` and `.data` as one would
//! expect. `cortex-m-rt` separates the vector table in its own section, named `.vector_table`. This
//! lets you distinguish how much space is taking the vector table in Flash vs how much is being
//! used by actual instructions (`.text`) and constants (`.rodata`).
//!
//! ``` text
//! $ size -Ax target/thumbv7m-none-eabi/examples/app
//! target/thumbv7m-none-eabi/release/examples/app  :
//! section             size         addr
//! .vector_table      0x400    0x8000000
//! .text               0x88    0x8000400
//! .rodata              0x0    0x8000488
//! .data                0x0   0x20000000
//! .bss                 0x0   0x20000000
//! ```
//!
//! Without the `-A` argument `size` reports the sum of the sizes of `.text`, `.rodata` and
//! `.vector_table` under "text".
//!
//! ``` text
//! $ size target/thumbv7m-none-eabi/examples/app
//!   text    data     bss     dec     hex filename
//!   1160       0       0    1660     67c target/thumbv7m-none-eabi/release/app
//! ```
//!
//! ## Symbols (`objdump`, `nm`)
//!
//! One will always find the following (unmangled) symbols in `cortex-m-rt` applications:
//!
//! - `Reset`. This is the reset handler. The microcontroller will executed this function upon
//! booting. This function will call the user program entry point (cf. [`#[entry]`][attr-entry])
//! using the `main` symbol so you may also find that symbol in your program; if you do, `main`
//! will contain your application code. Some other times `main` gets inlined into `Reset` so you
//! won't find it.
//!
//! - `DefaultHandler`. This is the default handler. If not overridden using `#[exception] fn
//! DefaultHandler(..` this will be an infinite loop.
//!
//! - `HardFaultTrampoline`. This is the real hard fault handler. This function is simply a
//! trampoline that jumps into the user defined hard fault handler named `HardFault`. The
//! trampoline is required to set up the pointer to the stacked exception frame.
//!
//! - `HardFault`. This is the user defined hard fault handler. If not overridden using
//! `#[exception] fn HardFault(..` it will default to an infinite loop.
//!
//! - `__STACK_START`. This is the first entry in the `.vector_table` section. This symbol contains
//! the initial value of the stack pointer; this is where the stack will be located -- the stack
//! grows downwards towards smaller addresses.
//!
//! - `__RESET_VECTOR`. This is the reset vector, a pointer into the `Reset` handler. This vector is
//! located in the `.vector_table` section after `__STACK_START`.
//!
//! - `__EXCEPTIONS`. This is the core exceptions portion of the vector table; it's an array of 14
//! exception vectors, which includes exceptions like `HardFault` and `SysTick`. This array is
//! located after `__RESET_VECTOR` in the `.vector_table` section.
//!
//! - `__INTERRUPTS`. This is the device specific interrupt portion of the vector table; its exact
//! size depends on the target device but if the `"device"` feature has not been enabled it will
//! have a size of 32 vectors (on ARMv6-M) or 240 vectors (on ARMv7-M). This array is located after
//! `__EXCEPTIONS` in the `.vector_table` section.
//!
//! - `__pre_init`. This is a function to be run before RAM is initialized. It defaults to an empty
//! function. The function called can be changed by applying the [`#[pre_init]`][attr-pre_init]
//! attribute to a function. The empty function is not optimized out by default, but if an empty
//! function is passed to [`#[pre_init]`][attr-pre_init] the function call will be optimized out.
//!
//! If you override any exception handler you'll find it as an unmangled symbol, e.g. `SysTick` or
//! `SVCall`, in the output of `objdump`,
//!
//! If you are targeting the `thumbv7em-none-eabihf` target you'll also see a `ResetTrampoline`
//! symbol in the output. To avoid the compiler placing FPU instructions before the FPU has been
//! enabled (cf. `vpush`) `Reset` calls the function `ResetTrampoline` which is marked as
//! `#[inline(never)]` and `ResetTrampoline` calls `main`. The compiler is free to inline `main`
//! into `ResetTrampoline` but it can't inline `ResetTrampoline` into `Reset` -- the FPU is enabled
//! in `Reset`.
//!
//! # Advanced usage
//!
//! ## Setting the program entry point
//!
//! This section describes how [`#[entry]`][attr-entry] is implemented. This information is useful
//! to developers who want to provide an alternative to [`#[entry]`][attr-entry] that provides extra
//! guarantees.
//!
//! The `Reset` handler will call a symbol named `main` (unmangled) *after* initializing `.bss` and
//! `.data`, and enabling the FPU (if the target is `thumbv7em-none-eabihf`). A function with the
//! `entry` attribute will be set to have the export name "`main`"; in addition, its mutable
//! statics are turned into safe mutable references (see [`#[entry]`][attr-entry] for details).
//!
//! The unmangled `main` symbol must have signature `extern "C" fn() -> !` or its invocation from
//! `Reset`  will result in undefined behavior.
//!
//! ## Incorporating device specific interrupts
//!
//! This section covers how an external crate can insert device specific interrupt handlers into the
//! vector table. Most users don't need to concern themselves with these details, but if you are
//! interested in how device crates generated using `svd2rust` integrate with `cortex-m-rt` read on.
//!
//! The information in this section applies when the `"device"` feature has been enabled.
//!
//! ### `__INTERRUPTS`
//!
//! The external crate must provide the interrupts portion of the vector table via a `static`
//! variable named`__INTERRUPTS` (unmangled) that must be placed in the `.vector_table.interrupts`
//! section of its object file.
//!
//! This `static` variable will be placed at `ORIGIN(FLASH) + 0x40`. This address corresponds to the
//! spot where IRQ0 (IRQ number 0) is located.
//!
//! To conform to the Cortex-M ABI `__INTERRUPTS` must be an array of function pointers; some spots
//! in this array may need to be set to 0 if they are marked as *reserved* in the data sheet /
//! reference manual. We recommend using a `union` to set the reserved spots to `0`; `None`
//! (`Option<fn()>`) may also work but it's not guaranteed that the `None` variant will *always* be
//! represented by the value `0`.
//!
//! Let's illustrate with an artificial example where a device only has two interrupt: `Foo`, with
//! IRQ number = 2, and `Bar`, with IRQ number = 4.
//!
//! ``` ignore
//! union Vector {
//!     handler: extern "C" fn(),
//!     reserved: usize,
//! }
//!
//! extern "C" {
//!     fn Foo();
//!     fn Bar();
//! }
//!
//! #[link_section = ".vector_table.interrupts"]
//! #[no_mangle]
//! pub static __INTERRUPTS: [Vector; 5] = [
//!     // 0-1: Reserved
//!     Vector { reserved: 0 },
//!     Vector { reserved: 0 },
//!
//!     // 2: Foo
//!     Vector { handler: Foo },
//!
//!     // 3: Reserved
//!     Vector { reserved: 0 },
//!
//!     // 4: Bar
//!     Vector { handler: Bar },
//! ];
//! ```
//!
//! ### `device.x`
//!
//! Linking in `__INTERRUPTS` creates a bunch of undefined references. If the user doesn't set a
//! handler for *all* the device specific interrupts then linking will fail with `"undefined
//! reference"` errors.
//!
//! We want to provide a default handler for all the interrupts while still letting the user
//! individually override each interrupt handler. In C projects, this is usually accomplished using
//! weak aliases declared in external assembly files. In Rust, we could achieve something similar
//! using `global_asm!`, but that's an unstable feature.
//!
//! A solution that doesn't require `global_asm!` or external assembly files is to use the `PROVIDE`
//! command in a linker script to create the weak aliases. This is the approach that `cortex-m-rt`
//! uses; when the `"device"` feature is enabled `cortex-m-rt`'s linker script (`link.x`) depends on
//! a linker script named `device.x`. The crate that provides `__INTERRUPTS` must also provide this
//! file.
//!
//! For our running example the `device.x` linker script looks like this:
//!
//! ``` text
//! /* device.x */
//! PROVIDE(Foo = DefaultHandler);
//! PROVIDE(Bar = DefaultHandler);
//! ```
//!
//! This weakly aliases both `Foo` and `Bar`. `DefaultHandler` is the default exception handler and
//! that the core exceptions use unless overridden.
//!
//! Because this linker script is provided by a dependency of the final application the dependency
//! must contain build script that puts `device.x` somewhere the linker can find. An example of such
//! build script is shown below:
//!
//! ``` ignore
//! use std::env;
//! use std::fs::File;
//! use std::io::Write;
//! use std::path::PathBuf;
//!
//! fn main() {
//!     // Put the linker script somewhere the linker can find it
//!     let out = &PathBuf::from(env::var_os("OUT_DIR").unwrap());
//!     File::create(out.join("device.x"))
//!         .unwrap()
//!         .write_all(include_bytes!("device.x"))
//!         .unwrap();
//!     println!("cargo:rustc-link-search={}", out.display());
//! }
//! ```
//!
//! ## Uninitialized static variables
//!
//! The `.uninit` linker section can be used to leave `static mut` variables uninitialized. One use
//! case of unitialized static variables is to avoid zeroing large statically allocated buffers (say
//! to be used as thread stacks) -- this can considerably reduce initialization time on devices that
//! operate at low frequencies.
//!
//! The only correct way to use this section is by placing `static mut` variables with type
//! [`MaybeUninit`] in it.
//!
//! [`MaybeUninit`]: https://doc.rust-lang.org/core/mem/union.MaybeUninit.html
//!
//! ``` ignore
//! use core::mem::MaybeUninit;
//!
//! const STACK_SIZE: usize = 8 * 1024;
//! const NTHREADS: usize = 4;
//!
//! #[link_section = ".uninit.STACKS"]
//! static mut STACKS: MaybeUninit<[[u8; STACK_SIZE]; NTHREADS]> = MaybeUninit::uninit();
//! ```
//!
//! Be very careful with the `link_section` attribute because it's easy to misuse in ways that cause
//! undefined behavior. At some point in the future we may add an attribute to safely place static
//! variables in this section.
//!
//! [attr-entry]: attr.entry.html
//! [attr-exception]: attr.exception.html
//! [attr-pre_init]: attr.pre_init.html

// # Developer notes
//
// - `link_section` is used to place symbols in specific places of the final binary. The names used
// here will appear in the linker script (`link.x`) in conjunction with the `KEEP` command.

#![deny(missing_docs)]
#![deny(warnings)]
#![no_std]

extern crate cortex_m_rt_macros as macros;
extern crate r0;

use core::fmt;
use core::sync::atomic::{self, Ordering};

#[cfg(feature = "device")]
#[doc(inline)]
pub use macros::interrupt;
#[doc(inline)]
pub use macros::{entry, exception, pre_init};

#[export_name = "error: cortex-m-rt appears more than once in the dependency graph"]
#[doc(hidden)]
pub static __ONCE__: () = ();

/// Registers stacked (pushed onto the stack) during an exception.
#[derive(Clone, Copy)]
#[repr(C)]
pub struct ExceptionFrame {
    /// (General purpose) Register 0
    pub r0: u32,

    /// (General purpose) Register 1
    pub r1: u32,

    /// (General purpose) Register 2
    pub r2: u32,

    /// (General purpose) Register 3
    pub r3: u32,

    /// (General purpose) Register 12
    pub r12: u32,

    /// Linker Register
    pub lr: u32,

    /// Program Counter
    pub pc: u32,

    /// Program Status Register
    pub xpsr: u32,
}

impl fmt::Debug for ExceptionFrame {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        struct Hex(u32);
        impl fmt::Debug for Hex {
            fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
                write!(f, "0x{:08x}", self.0)
            }
        }
        f.debug_struct("ExceptionFrame")
            .field("r0", &Hex(self.r0))
            .field("r1", &Hex(self.r1))
            .field("r2", &Hex(self.r2))
            .field("r3", &Hex(self.r3))
            .field("r12", &Hex(self.r12))
            .field("lr", &Hex(self.lr))
            .field("pc", &Hex(self.pc))
            .field("xpsr", &Hex(self.xpsr))
            .finish()
    }
}

/// Returns a pointer to the start of the heap
///
/// The returned pointer is guaranteed to be 4-byte aligned.
#[inline]
pub fn heap_start() -> *mut u32 {
    extern "C" {
        static mut __sheap: u32;
    }

    unsafe { &mut __sheap }
}

/* Entry point */
#[doc(hidden)]
#[cfg_attr(cortex_m, link_section = ".vector_table.reset_vector")]
#[no_mangle]
#[cfg(not(armv6m))]
pub static __RESET_VECTOR: unsafe extern "C" fn() -> ! = Reset;

#[doc(hidden)]
#[link_section = ".vector_table.reset_vector"]
#[no_mangle]
#[cfg(armv6m)]
pub static __RESET_VECTOR: unsafe extern "C" fn() -> ! = PreResetTrampoline;

#[doc(hidden)]
#[cfg_attr(cortex_m, link_section = ".Reset")]
#[no_mangle]
pub unsafe extern "C" fn Reset() -> ! {
    extern "C" {

        // These symbols come from `link.x`
        static mut __sbss: u32;
        static mut __ebss: u32;

        static mut __sdata: u32;
        static mut __edata: u32;
        static __sidata: u32;

    }

    extern "Rust" {
        // This symbol will be provided by the user via `#[entry]`
        fn main() -> !;

        // This symbol will be provided by the user via `#[pre_init]`
        fn __pre_init();
    }

    __pre_init();

    // Initialize RAM
    r0::zero_bss(&mut __sbss, &mut __ebss);
    r0::init_data(&mut __sdata, &mut __edata, &__sidata);

    match () {
        #[cfg(not(has_fpu))]
        () => main(),
        #[cfg(has_fpu)]
        () => {
            // We redefine these here to avoid pulling the `cortex-m` crate as a dependency
            const SCB_CPACR: *mut u32 = 0xE000_ED88 as *mut u32;
            const SCB_CPACR_FPU_ENABLE: u32 = 0b01_01 << 20;
            const SCB_CPACR_FPU_USER: u32 = 0b10_10 << 20;

            // enable the FPU
            core::ptr::write_volatile(
                SCB_CPACR,
                *SCB_CPACR | SCB_CPACR_FPU_ENABLE | SCB_CPACR_FPU_USER,
            );

            // this is used to prevent the compiler from inlining the user `main` into the reset
            // handler. Inlining can cause the FPU instructions in the user `main` to be executed
            // before enabling the FPU, and that would produce a hard to diagnose hard fault at
            // runtime.
            #[inline(never)]
            #[export_name = "ResetTrampoline"]
            fn trampoline() -> ! {
                unsafe { main() }
            }

            trampoline()
        }
    }
}

#[allow(unused_variables)]
#[doc(hidden)]
#[cfg_attr(cortex_m, link_section = ".HardFault.default")]
#[no_mangle]
pub unsafe extern "C" fn HardFault_(ef: &ExceptionFrame) -> ! {
    loop {
        // add some side effect to prevent this from turning into a UDF instruction
        // see rust-lang/rust#28728 for details
        atomic::compiler_fence(Ordering::SeqCst);
    }
}

#[doc(hidden)]
#[no_mangle]
pub unsafe extern "C" fn DefaultHandler_() -> ! {
    loop {
        // add some side effect to prevent this from turning into a UDF instruction
        // see rust-lang/rust#28728 for details
        atomic::compiler_fence(Ordering::SeqCst);
    }
}

#[doc(hidden)]
#[no_mangle]
pub unsafe extern "C" fn DefaultPreInit() {}

/* Exceptions */
#[doc(hidden)]
pub enum Exception {
    NonMaskableInt,

    // Not overridable
    // HardFault,
    #[cfg(not(armv6m))]
    MemoryManagement,

    #[cfg(not(armv6m))]
    BusFault,

    #[cfg(not(armv6m))]
    UsageFault,

    #[cfg(armv8m)]
    SecureFault,

    SVCall,

    #[cfg(not(armv6m))]
    DebugMonitor,

    PendSV,

    SysTick,
}

extern "C" {
    #[cfg(armv6m)]
    fn PreResetTrampoline() -> !;

    fn NonMaskableInt();

    fn HardFaultTrampoline();

    #[cfg(not(armv6m))]
    fn MemoryManagement();

    #[cfg(not(armv6m))]
    fn BusFault();

    #[cfg(not(armv6m))]
    fn UsageFault();

    #[cfg(armv8m)]
    fn SecureFault();

    fn SVCall();

    #[cfg(not(armv6m))]
    fn DebugMonitor();

    fn PendSV();

    fn SysTick();
}

#[doc(hidden)]
pub union Vector {
    handler: unsafe extern "C" fn(),
    reserved: usize,
}

#[doc(hidden)]
#[cfg_attr(cortex_m, link_section = ".vector_table.exceptions")]
#[no_mangle]
pub static __EXCEPTIONS: [Vector; 14] = [
    // Exception 2: Non Maskable Interrupt.
    Vector {
        handler: NonMaskableInt,
    },
    // Exception 3: Hard Fault Interrupt.
    Vector { handler: HardFaultTrampoline },
    // Exception 4: Memory Management Interrupt [not on Cortex-M0 variants].
    #[cfg(not(armv6m))]
    Vector {
        handler: MemoryManagement,
    },
    #[cfg(armv6m)]
    Vector { reserved: 0 },
    // Exception 5: Bus Fault Interrupt [not on Cortex-M0 variants].
    #[cfg(not(armv6m))]
    Vector { handler: BusFault },
    #[cfg(armv6m)]
    Vector { reserved: 0 },
    // Exception 6: Usage Fault Interrupt [not on Cortex-M0 variants].
    #[cfg(not(armv6m))]
    Vector {
        handler: UsageFault,
    },
    #[cfg(armv6m)]
    Vector { reserved: 0 },
    // Exception 7: Secure Fault Interrupt [only on Armv8-M].
    #[cfg(armv8m)]
    Vector {
        handler: SecureFault,
    },
    #[cfg(not(armv8m))]
    Vector { reserved: 0 },
    // 8-10: Reserved
    Vector { reserved: 0 },
    Vector { reserved: 0 },
    Vector { reserved: 0 },
    // Exception 11: SV Call Interrupt.
    Vector { handler: SVCall },
    // Exception 12: Debug Monitor Interrupt [not on Cortex-M0 variants].
    #[cfg(not(armv6m))]
    Vector {
        handler: DebugMonitor,
    },
    #[cfg(armv6m)]
    Vector { reserved: 0 },
    // 13: Reserved
    Vector { reserved: 0 },
    // Exception 14: Pend SV Interrupt [not on Cortex-M0 variants].
    Vector { handler: PendSV },
    // Exception 15: System Tick Interrupt.
    Vector { handler: SysTick },
];

// If we are not targeting a specific device we bind all the potential device specific interrupts
// to the default handler
#[cfg(all(any(not(feature = "device"), test), not(armv6m)))]
#[doc(hidden)]
#[cfg_attr(cortex_m, link_section = ".vector_table.interrupts")]
#[no_mangle]
pub static __INTERRUPTS: [unsafe extern "C" fn(); 240] = [{
    extern "C" {
        fn DefaultHandler();
    }

    DefaultHandler
}; 240];

// ARMv6-M can only have a maximum of 32 device specific interrupts
#[cfg(all(not(feature = "device"), armv6m))]
#[doc(hidden)]
#[cfg_attr(cortex_m, link_section = ".vector_table.interrupts")]
#[no_mangle]
pub static __INTERRUPTS: [unsafe extern "C" fn(); 32] = [{
    extern "C" {
        fn DefaultHandler();
    }

    DefaultHandler
}; 32];