Module esp32c2_hal::efuse
source · Expand description
Reading of eFuses
Structs
- The bit field for get access to efuse data
Constants
- [] ADC1 calibration voltage at atten0
- [] ADC1 calibration voltage at atten3
- [] ADC1 init code at atten0
- [] ADC1 init code at atten3
- [] Store the bit [86:96] of ADC calibration data
- [] Major version of BLOCK2
- [] Minor version of BLOCK2 {0: “No calib”; 1: “With calib”}
- [ENABLE_CUSTOM_MAC] True if MAC_CUSTOM is burned
- [] BLOCK2 digital dbias when hvt
- [] BLOCK2 DIG_LDO_ACT_DBIAS26
- [] BLOCK2 DIG_LDO_ACT_STEPD10
- [] BLOCK2 DIG_LDO_DBG0_DBIAS2
- [] BLOCK2 DIG_LDO_DBG0_DBIAS26
- [] Disables check of blk version major
- [] Disables check of wafer version major
- [] This bit set means disable direct_boot mode
- [] The bit be set to disable icache in download mode
- [] The bit be set to disable manual encryption
- [] Set this bit to disable download mode (boot_mode[3:0] = 0; 1; 2; 4; 5; 6; 7)
- [] Set this bit to disable pad jtag
- [] Set this bit to enable secure UART download mode
- [] Configures flash waiting time after power-up; in unit of ms. If the value is less than 15; the waiting time is the configurable value. Otherwise; the waiting time is twice the configurable value
- [] Set this bit to force ROM code to send a resume command during SPI boot
- [BLOCK_KEY0] BLOCK_BLOCK_KEY0 - 256-bits. 256-bit key of Flash Encryption
- [] 128bit FE key
- [] 256bit FE key
- [] 128bit SB key
- MAC_FACTORY MAC address
- [] OCode
- [] EFUSE_PKG_VERSION
- [] Disable reading from BlOCK3
- [] Read protection for EFUSE_BLK3. KEY0
- [] Read protection for EFUSE_BLK3. KEY0 higher 128-bit key
- [] Read protection for EFUSE_BLK3. KEY0 lower 128-bit key
- [] BLOCK2 DIG_LDO_ACT_DBIAS13
- [] BLOCK2 DIG_LDO_ACT_DBIAS31
- [] BLOCK2 DIG_LDO_SLP_DBIAS13
- [] BLOCK2 DIG_LDO_SLP_DBIAS29
- [] BLOCK2 DIG_LDO_SLP_DBIAS31
- [] The bit be set to enable secure boot
- [] Secure version for anti-rollback
- [] Enables flash encryption when 1 or 3 bits are set and disables otherwise {0: “Disable”; 1: “Enable”; 3: “Disable”; 7: “Enable”}
- [] Temperature calibration data
- [] Set the default UARTboot message output mode {0: “Enable”; 1: “Enable when GPIO8 is low at reset”; 2: “Enable when GPIO8 is high at reset”; 3: “Disable”}
- [] User data block
- [MAC_CUSTOM CUSTOM_MAC] Custom MAC address
- [] WAFER_VERSION_MAJOR
- [] WAFER_VERSION_MINOR
- [] RTC watchdog timeout threshold; in unit of slow clock cycle {0: “40000”; 1: “80000”; 2: “160000”; 3: “320000”}
- [] Disable programming of individual eFuses
- [] wr_dis of ADC1_CAL_VOL_ATTEN0
- [] wr_dis of ADC1_CAL_VOL_ATTEN3
- [] wr_dis of ADC1_INIT_CODE_ATTEN0
- [] wr_dis of ADC1_INIT_CODE_ATTEN3
- [] wr_dis of ADC_CALIBRATION_3
- [] wr_dis of BLK_VERSION_MAJOR
- [] wr_dis of BLK_VERSION_MINOR
- [WR_DIS.KEY0] wr_dis of BLOCK_KEY0
- [WR_DIS.MAC_CUSTOM WR_DIS.USER_DATA_MAC_CUSTOM] wr_dis of CUSTOM_MAC
- [WR_DIS.ENABLE_CUSTOM_MAC] wr_dis of CUSTOM_MAC_USED
- [] wr_dis of DIG_DBIAS_HVT
- [] wr_dis of DIG_LDO_ACT_DBIAS26
- [] wr_dis of DIG_LDO_ACT_STEPD10
- [] wr_dis of DIG_LDO_SLP_DBIAS2
- [] wr_dis of DIG_LDO_SLP_DBIAS26
- [] wr_dis of DISABLE_BLK_VERSION_MAJOR
- [] wr_dis of DISABLE_WAFER_VERSION_MAJOR
- [] wr_dis of DIS_DIRECT_BOOT
- [] wr_dis of DIS_DOWNLOAD_ICACHE
- [] wr_dis of DIS_DOWNLOAD_MANUAL_ENCRYPT
- [] wr_dis of DIS_DOWNLOAD_MODE
- [] wr_dis of DIS_PAD_JTAG
- [] wr_dis of ENABLE_SECURITY_DOWNLOAD
- [] wr_dis of FLASH_TPUW
- [] wr_dis of FORCE_SEND_RESUME
- [WR_DIS.MAC_FACTORY] wr_dis of MAC
- [] wr_dis of OCODE
- [] wr_dis of PKG_VERSION
- [] wr_dis of RD_DIS
- [] wr_dis of RTC_LDO_ACT_DBIAS13
- [] wr_dis of RTC_LDO_ACT_DBIAS31
- [] wr_dis of RTC_LDO_SLP_DBIAS13
- [] wr_dis of RTC_LDO_SLP_DBIAS29
- [] wr_dis of RTC_LDO_SLP_DBIAS31
- [] wr_dis of SECURE_BOOT_EN
- [] wr_dis of SECURE_VERSION
- [] wr_dis of SPI_BOOT_CRYPT_CNT
- [] wr_dis of TEMP_CALIB
- [] wr_dis of UART_PRINT_CONTROL
- [] wr_dis of WAFER_VERSION_MAJOR
- [] wr_dis of WAFER_VERSION_MINOR
- [] wr_dis of WDT_DELAY_SEL
- [] wr_dis of XTS_KEY_LENGTH_256
- [] Flash encryption key length {0: “128 bits key”; 1: “256 bits key”}