Crate portable_atomic

Portable atomic types including support for 128-bit atomics, atomic float, etc.

• Provide all atomic integer types (Atomic{I,U}{8,16,32,64}) for all targets that can use atomic CAS. (i.e., all targets that can use std, and most no-std targets)
• Provide AtomicI128 and AtomicU128.
• Provide AtomicF32 and AtomicF64. (optional)

• Provide atomic load/store for targets where atomic is not available at all in the standard library. (RISC-V without A-extension, MSP430, AVR)
• Provide atomic CAS for targets where atomic CAS is not available in the standard library. (thumbv6m, pre-v6 ARM, RISC-V without A-extension, MSP430, AVR) (optional and single-core only for ARM and RISC-V, always enabled for MSP430 and AVR)
• Provide stable equivalents of the standard library’s atomic types’ unstable APIs, such as AtomicPtr::fetch_*, AtomicBool::fetch_not.
• Make features that require newer compilers, such as fetch_max, fetch_min, fetch_update, and stronger CAS failure ordering available on Rust 1.34+.
• Provide workaround for bugs in the standard library’s atomic-related APIs, such as rust-lang/rust#100650, fence/compiler_fence on MSP430 that cause LLVM error, etc.

Note: The latest version of portable-atomic is 1.x. portable-atomic 0.3 (this branch) is now (since 0.3.20) built top of portable-atomic 1.x to make bug fixes and improvements such as support for new targets in 1.x available to the ecosystem that depends on older portable-atomic. portable-atomic 0.3 is still maintained passively, but upgrading to portable-atomic 1.x is recommended. (There are no breaking changes from 0.3, except that a deprecated no-op outline-atomics Cargo feature has been removed.)

Usage

Add this to your Cargo.toml:

[dependencies]
portable-atomic = "0.3"

The default features are mainly for users who use atomics larger than the pointer width. If you don’t need them, disabling the default features may reduce code size and compile time slightly.

[dependencies]
portable-atomic = { version = "0.3", default-features = false }

Compiler support: requires rustc 1.34+

128-bit atomics support

Native 128-bit atomic operations are available on x86_64 (Rust 1.59+), aarch64 (Rust 1.59+), powerpc64 (le or pwr8+, nightly only), and s390x (nightly only), otherwise the fallback implementation is used.

On x86_64, even if cmpxchg16b is not available at compile time (note: cmpxchg16b target feature is enabled by default only on macOS), run-time detection checks whether cmpxchg16b is available. If cmpxchg16b is not available at either compile-time or run-time detection, the fallback implementation is used. See also portable_atomic_no_outline_atomics cfg.

They are usually implemented using inline assembly, and when using Miri or ThreadSanitizer that do not support inline assembly, core intrinsics are used instead of inline assembly if possible.

See this list for details.

Optional features

• fallback (enabled by default)
  Enable fallback implementations.

  Disabling this allows only atomic types for which the platform natively supports atomic operations.

• float
  Provide AtomicF{32,64}. Note that most of fetch_* operations of atomic floats are implemented using CAS loops, which can be slower than equivalent operations of atomic integers.

• std
  Use std.

• serde
  Implement serde::{Serialize,Deserialize} for atomic types.

  Note:

  • The MSRV when this feature enables depends on the MSRV of serde.

Optional cfg

• --cfg portable_atomic_unsafe_assume_single_core
  Assume that the target is single-core. When this cfg is enabled, this crate provides atomic CAS for targets where atomic CAS is not available in the standard library by disabling interrupts.

  This cfg is unsafe, and note the following safety requirements:

  • Enabling this cfg for multi-core systems is always unsound.

  • This uses privileged instructions to disable interrupts, so it usually doesn’t work on unprivileged mode. Enabling this cfg in an environment where privileged instructions are not available, or if the instructions used are not sufficient to disable interrupts in the system, it is also usually considered unsound, although the details are system-dependent.

    The following are known cases:

    • On pre-v6 ARM, this disables only IRQs by default. For many systems (e.g., GBA) this is enough. If the system need to disable both IRQs and FIQs, you need to pass the --cfg portable_atomic_disable_fiq together.
    • On RISC-V without A-extension, this generates code for machine-mode (M-mode) by default. If you pass the --cfg portable_atomic_s_mode together, this generates code for supervisor-mode (S-mode). In particular, qemu-system-riscv* uses OpenSBI as the default firmware.

    See also the interrupt module’s readme.

  This is intentionally not an optional feature. (If this is an optional feature, dependencies can implicitly enable the feature, resulting in the use of unsound code without the end-user being aware of it.)

  ARMv6-M (thumbv6m), pre-v6 ARM (e.g., thumbv4t, thumbv5te), RISC-V without A-extension are currently supported. See #33 for support of multi-core systems.

  Since all MSP430 and AVR are single-core, we always provide atomic CAS for them without this cfg.

  Enabling this cfg for targets that have atomic CAS will result in a compile error.

  The cfg interface is kept between versions, so it is designed to prevent downstream builds from breaking when upgrade to semver-incompatible version unless the portable-atomic types are exposed in the library’s API.

  Feel free to submit an issue if your target is not supported yet.

• --cfg portable_atomic_no_outline_atomics
  Disable dynamic dispatching by run-time CPU feature detection.

  If dynamic dispatching by run-time CPU feature detection is enabled, it allows maintaining support for older CPUs while using features that are not supported on older CPUs, such as CMPXCHG16B (x86_64) and FEAT_LSE (aarch64).

  Note:

  • Dynamic detection is currently only enabled in Rust 1.61+ for aarch64, in 1.59+ (AVX) or nightly (CMPXCHG16B) for x86_64, and in nightly for other platforms, otherwise it works the same as when this cfg is set.
  • If the required target features are enabled at compile-time, the atomic operations are inlined.
  • This is compatible with no-std (as with all features except std).
  • Some aarch64 targets enable LLVM’s outline-atomics target feature by default, so if you set this cfg, you may want to disable that as well.

  See also this list.

Related Projects

• atomic-maybe-uninit: Atomic operations on potentially uninitialized integers.
• atomic-memcpy: Byte-wise atomic memcpy.

Re-exports

• pub use core::sync::atomic::Ordering;

Modules

• hint
  Re-export of the core::hint module.

Structs

• AtomicBool
  A boolean type which can be safely shared between threads.
• AtomicF32float
  A floating point type which can be safely shared between threads.
• AtomicF64float
  A floating point type which can be safely shared between threads.
• AtomicI8
  An integer type which can be safely shared between threads.
• AtomicI16
  An integer type which can be safely shared between threads.
• AtomicI32
  An integer type which can be safely shared between threads.
• AtomicI64
  An integer type which can be safely shared between threads.
• AtomicI128
  An integer type which can be safely shared between threads.
• AtomicIsize
  An integer type which can be safely shared between threads.
• AtomicPtr
  A raw pointer type which can be safely shared between threads.
• AtomicU8
  An integer type which can be safely shared between threads.
• AtomicU16
  An integer type which can be safely shared between threads.
• AtomicU32
  An integer type which can be safely shared between threads.
• AtomicU64
  An integer type which can be safely shared between threads.
• AtomicU128
  An integer type which can be safely shared between threads.
• AtomicUsize
  An integer type which can be safely shared between threads.

Functions

• compiler_fence
  A compiler memory fence.
• fence
  An atomic fence.