use std::borrow::Cow;
use std::fmt;
use std::str;
use std::hash::{Hash, Hasher};
use std::cmp::Ordering;

#[cfg(test)]
use quickcheck::{Arbitrary, Gen};

use once_cell::sync::OnceCell;
use regex::Regex;

use crate::Result;
use crate::packet;
use crate::Packet;
use crate::Error;
use crate::policy::HashAlgoSecurity;

/// A conventionally parsed UserID.
#[derive(Clone, Debug)]
pub struct ConventionallyParsedUserID {
    userid: String,

    name: Option<(usize, usize)>,
    comment: Option<(usize, usize)>,
    email: Option<(usize, usize)>,
    uri: Option<(usize, usize)>,
}
assert_send_and_sync!(ConventionallyParsedUserID);

impl ConventionallyParsedUserID {
    /// Parses the userid according to the usual conventions.
    pub fn new<S>(userid: S) -> Result<Self>
        where S: Into<String>
    {
        Self::parse(userid.into())
    }

    /// Returns the User ID's name component, if any.
    pub fn name(&self) -> Option<&str> {
        self.name.map(|(s, e)| &self.userid[s..e])
    }

    /// Returns the User ID's comment field, if any.
    pub fn comment(&self) -> Option<&str> {
        self.comment.map(|(s, e)| &self.userid[s..e])
    }

    /// Returns the User ID's email component, if any.
    pub fn email(&self) -> Option<&str> {
        self.email.map(|(s, e)| &self.userid[s..e])
    }

    /// Returns the User ID's URI component, if any.
    ///
    /// Note: the URI is returned as is; dot segments are not removed,
    /// escape sequences are not unescaped, etc.
    pub fn uri(&self) -> Option<&str> {
        self.uri.map(|(s, e)| &self.userid[s..e])
    }

    fn parse(userid: String) -> Result<Self> {
        lazy_static::lazy_static!{
            static ref USER_ID_PARSER: Regex = {
                // Whitespace.
                let ws_bare = " ";
                let ws = format!("[{}]", ws_bare);
                let optional_ws = format!("(?:{}*)", ws);

                // Specials minus ( and ).
                let comment_specials_bare = r#"<>\[\]:;@\\,.""#;
                let _comment_specials
                    = format!("[{}]", comment_specials_bare);

                let atext_specials_bare = r#"()\[\]:;@\\,.""#;
                let _atext_specials =
                    format!("[{}]", atext_specials_bare);

                // "Text"
                let atext_bare
                    = "-A-Za-z0-9!#$%&'*+/=?^_`{|}~\u{80}-\u{10ffff}";
                let atext = format!("[{}]", atext_bare);

                // An atext with dots and the added restriction that
                // it may not start or end with a dot.
                let dot_atom_text
                    = format!(r"(?:{}+(?:\.{}+)*)", atext, atext);


                let name_char_start
                    = format!("[{}{}]",
                              atext_bare, atext_specials_bare);
                let name_char_rest
                    = format!("[{}{}{}]",
                              atext_bare, atext_specials_bare, ws_bare);
                // We need to minimize the match as otherwise we
                // swallow any comment.
                let name
                    = format!("(?:{}{}*?)", name_char_start, name_char_rest);

                let comment_char
                    = format!("[{}{}{}]",
                              atext_bare, comment_specials_bare, ws_bare);

                let comment = |prefix| {
                    format!(r#"(?:\({}(?P<{}_comment>{}*?){}\))"#,
                            optional_ws, prefix, comment_char, optional_ws)
                };

                let addr_spec
                    = format!("(?:{}@{})", dot_atom_text, dot_atom_text);

                let uri = |prefix| {
                    // The regex suggested from the RFC:
                    //
                    // ^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?
                    //   ^schema         ^authority ^path      ^query     ^fragment
                    //
                    // Since only the path component is required, and
                    // the path matches everything but the '?' and '#'
                    // characters, this regular expression will match
                    // almost any string.
                    //
                    // This regular expression is good for picking
                    // apart strings that are known to be URIs.  But,
                    // we want to detect URIs and distinguish them
                    // from things that are almost certainly not URIs,
                    // like email addresses.
                    //
                    // As such, we require the URI to have a
                    // well-formed schema, and the schema must be
                    // followed by a non-empty component.  Further, we
                    // restrict the alphabet to approximately what the
                    // grammar permits.

                    // Looking at the productions for the schema,
                    // authority, path, query, and fragment
                    // components, we can distil the following useful
                    // alphabets (the symbols are drawn from the
                    // following pct-encoded, unreserved, gen-delims,
                    // sub-delims, pchar, and IP-literal productions):
                    let symbols = "-{}0-9._~%!$&'()*+,;=:@\\[\\]";
                    let ascii_alpha = "a-zA-Z";
                    let utf8_alpha = "a-zA-Z\u{80}-\u{10ffff}";

                    // We strictly match the schema production:
                    //
                    // scheme = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
                    let schema
                        = format!("(?:[{}][-+.{}0-9]*:)",
                                  ascii_alpha, ascii_alpha);

                    // The symbols that can occur in a fragment are a
                    // superset of those that can occur in a query and
                    // its delimiters.  Likewise, the symbols that can
                    // occur in a query are a superset of those that
                    // can occur in a path and its delimiters.  The
                    // symbols that can occur in a path are *almost* a
                    // subset of those that can occur in an authority:
                    // '[' and ']' can occur in an authority component
                    // (via the IP-literal production, e.g.,
                    // '[2001:db8::7]'), but not in a path.  But, URI
                    // parsers appear to accept '[' and ']' as part of
                    // a path.  So, we accept them too.
                    //
                    // Given this, a fragment matches all components
                    // and everything that precedes it.  Since we
                    // don't need to distinguish the individual parts
                    // here, matching what follows the schema in a URI
                    // is straightforward:
                    let rest = format!("(?:[{}{}/\\?#]+)",
                                       symbols, utf8_alpha);

                    format!("(?P<{}_uri>{}{})",
                            prefix, schema, rest)
                };

                let raw_addr_spec
                    = format!("(?P<raw_addr_spec>{})", addr_spec);

                let raw_uri = format!("(?:{})", uri("raw"));

                // whitespace is ignored.  It is allowed (but not
                // required) at the start and between components, but
                // it is not allowed after the closing '>'.  space is
                // not allowed.
                let wrapped_addr_spec
                    = format!("{}(?P<wrapped_addr_spec_name>{})?{}\
                               (?:{})?{}\
                               <(?P<wrapped_addr_spec>{})>",
                              optional_ws, name, optional_ws,
                              comment("wrapped_addr_spec"), optional_ws,
                              addr_spec);

                let wrapped_uri
                    = format!("{}(?P<wrapped_uri_name>{})?{}\
                               (?:{})?{}\
                               <(?:{})>",
                              optional_ws, name, optional_ws,
                              comment("wrapped_uri"), optional_ws,
                              uri("wrapped"));

                let bare_name
                    = format!("{}(?P<bare_name>{}){}\
                               (?:{})?{}",
                              optional_ws, name, optional_ws,
                              comment("bare"), optional_ws);

                // Note: bare-name has to come after addr-spec-raw as
                // prefer addr-spec-raw to bare-name when the match is
                // ambiguous.
                let pgp_uid_convention
                    = format!("^(?:{}|{}|{}|{}|{})$",
                              raw_addr_spec, raw_uri,
                              wrapped_addr_spec, wrapped_uri,
                              bare_name);

                Regex::new(&pgp_uid_convention).unwrap()
            };
        }

        // The regex is anchored at the start and at the end so we
        // have either 0 or 1 matches.
        if let Some(cap) = USER_ID_PARSER.captures_iter(&userid).next() {
            let to_range = |m: regex::Match| (m.start(), m.end());

            // We need to figure out which branch matched.  Match on a
            // required capture for each branch.

            if let Some(email) = cap.name("raw_addr_spec") {
                // raw-addr-spec
                let email = Some(to_range(email));

                Ok(ConventionallyParsedUserID {
                    userid,
                    name: None,
                    comment: None,
                    email,
                    uri: None,
                })
            } else if let Some(uri) = cap.name("raw_uri") {
                // raw-uri
                let uri = Some(to_range(uri));

                Ok(ConventionallyParsedUserID {
                    userid,
                    name: None,
                    comment: None,
                    email: None,
                    uri,
                })
            } else if let Some(email) = cap.name("wrapped_addr_spec") {
                // wrapped-addr-spec
                let name = cap.name("wrapped_addr_spec_name").map(to_range);
                let comment = cap.name("wrapped_addr_spec_comment").map(to_range);
                let email = Some(to_range(email));

                Ok(ConventionallyParsedUserID {
                    userid,
                    name,
                    comment,
                    email,
                    uri: None,
                })
            } else if let Some(uri) = cap.name("wrapped_uri") {
                // uri-wrapped
                let name = cap.name("wrapped_uri_name").map(to_range);
                let comment = cap.name("wrapped_uri_comment").map(to_range);
                let uri = Some(to_range(uri));

                Ok(ConventionallyParsedUserID {
                    userid,
                    name,
                    comment,
                    email: None,
                    uri,
                })
            } else if let Some(name) = cap.name("bare_name") {
                // name-bare
                let name = to_range(name);
                let comment = cap.name("bare_comment").map(to_range);

                Ok(ConventionallyParsedUserID {
                    userid,
                    name: Some(name),
                    comment,
                    email: None,
                    uri: None,
                })
            } else {
                panic!("Unexpected result");
            }
        } else {
            Err(Error::InvalidArgument(
                "Failed to parse UserID".into()).into())
        }
    }
}

/// Holds a UserID packet.
///
/// The standard imposes no structure on UserIDs, but suggests to
/// follow [RFC 2822].  See [Section 5.11 of RFC 4880] for details.
/// In practice though, implementations do not follow [RFC 2822], or
/// do not even help their users in producing well-formed User IDs.
/// Experience has shown that parsing User IDs using [RFC 2822] does
/// not work, so we are taking a more pragmatic approach and define
/// what we call *Conventional User IDs*.
///
///   [RFC 2822]: https://tools.ietf.org/html/rfc2822
///   [Section 5.11 of RFC 4880]: https://tools.ietf.org/html/rfc4880#section-5.11
///
/// Using this definition, we provide methods to extract the [name],
/// [comment], [email address], or [URI] from `UserID` packets.
/// Furthermore, we provide a way to [canonicalize the email address]
/// found in a `UserID` packet.  We provide [two] [constructors] that
/// create well-formed User IDs from email address, and optional name
/// and comment.
///
///   [name]: UserID::name()
///   [comment]: UserID::comment()
///   [email address]: UserID::email()
///   [URI]: UserID::uri()
///   [canonicalize the email address]: UserID::email_normalized()
///   [two]: UserID::from_address()
///   [constructors]: UserID::from_unchecked_address()
///
/// # Conventional User IDs
///
/// Informally, conventional User IDs are of the form:
///
///   - `First Last (Comment) <name@example.org>`
///   - `First Last <name@example.org>`
///   - `First Last`
///   - `name@example.org <name@example.org>`
///   - `<name@example.org>`
///   - `name@example.org`
///
///   - `Name (Comment) <scheme://hostname/path>`
///   - `Name (Comment) <mailto:user@example.org>`
///   - `Name <scheme://hostname/path>`
///   - `<scheme://hostname/path>`
///   - `scheme://hostname/path`
///
/// Names consist of UTF-8 non-control characters and may include
/// punctuation.  For instance, the following names are valid:
///
///   - `Acme Industries, Inc.`
///   - `Michael O'Brian`
///   - `Smith, John`
///   - `e.e. cummings`
///
/// (Note: according to [RFC 2822] and its successors, all of these
/// would need to be quoted.  Conventionally, no implementation quotes
/// names.)
///
/// Conventional User IDs are UTF-8.  [RFC 2822] only covers US-ASCII
/// and allows character set switching using [RFC 2047].  For example,
/// an [RFC 2822] parser would parse:
///
///    - <code>Bj=?utf-8?q?=C3=B6?=rn Bj=?utf-8?q?=C3=B6?=rnson</code>
///
///   [RFC 2047]: https://tools.ietf.org/html/rfc2047
///
/// "Björn Björnson".  Nobody uses this in practice, and, as such,
/// this extension is not supported by this parser.
///
/// Comments can include any UTF-8 text except parentheses.  Thus, the
/// following is not a valid comment even though the parentheses are
/// balanced:
///
///   - `(foo (bar))`
///
/// URIs
/// ----
///
/// The URI parser recognizes URIs using a regular expression similar
/// to the one recommended in [RFC 3986] with the following extensions
/// and restrictions:
///
///   - UTF-8 characters are in the range `\u{80}-\u{10ffff}` are
///     allowed wherever percent-encoded characters are allowed (i.e.,
///     everywhere but the schema).
///
///   - The scheme component and its trailing `:` are required.
///
///   - The URI must have an authority component (`//domain`) or a
///     path component (`/path/to/resource`).
///
///   - Although the RFC does not allow it, in practice, the `[` and
///     `]` characters are allowed wherever percent-encoded characters
///     are allowed (i.e., everywhere but the schema).
///
/// URIs are neither normalized nor interpreted.  For instance, dot
/// segments are not removed, escape sequences are not decoded, etc.
///
/// Note: the recommended regular expression is less strict than the
/// grammar.  For instance, a percent encoded character must consist
/// of three characters: the percent character followed by two hex
/// digits.  The parser that we use does not enforce this either.
///
///   [RFC 3986]: https://tools.ietf.org/html/rfc3986
///
/// Formal Grammar
/// --------------
///
/// Formally, the following grammar is used to decompose a User ID:
///
/// ```text
///   WS                 = 0x20 (space character)
///
///   comment-specials   = "<" / ">" /   ; RFC 2822 specials - "(" and ")"
///                        "[" / "]" /
///                        ":" / ";" /
///                        "@" / "\" /
///                        "," / "." /
///                        DQUOTE
///
///   atext-specials     = "(" / ")" /   ; RFC 2822 specials - "<" and ">".
///                        "[" / "]" /
///                        ":" / ";" /
///                        "@" / "\" /
///                        "," / "." /
///                        DQUOTE
///
///   atext              = ALPHA / DIGIT /   ; Any character except controls,
///                        "!" / "#" /       ;  SP, and specials.
///                        "$" / "%" /       ;  Used for atoms
///                        "&" / "'" /
///                        "*" / "+" /
///                        "-" / "/" /
///                        "=" / "?" /
///                        "^" / "_" /
///                        "`" / "{" /
///                        "|" / "}" /
///                        "~" /
///                        \u{80}-\u{10ffff} ; Non-ascii, non-control UTF-8
///
///   dot_atom_text      = 1*atext *("." *atext)
///
///   name-char-start    = atext / atext-specials
///
///   name-char-rest     = atext / atext-specials / WS
///
///   name               = name-char-start *name-char-rest
///
///   comment-char       = atext / comment-specials / WS
///
///   comment-content    = *comment-char
///
///   comment            = "(" *WS comment-content *WS ")"
///
///   addr-spec          = dot-atom-text "@" dot-atom-text
///
///   uri                = See [RFC 3986] and the note on URIs above.
///
///   pgp-uid-convention = addr-spec /
///                        uri /
///                        *WS [name] *WS [comment] *WS "<" addr-spec ">" /
///                        *WS [name] *WS [comment] *WS "<" uri ">" /
///                        *WS name *WS [comment] *WS
/// ```
pub struct UserID {
    /// CTB packet header fields.
    pub(crate) common: packet::Common,
    /// The user id.
    ///
    /// According to [RFC 4880], the text is by convention UTF-8 encoded
    /// and in "mail name-addr" form, i.e., "Name (Comment)
    /// <email@example.com>".
    ///
    ///   [RFC 4880]: https://tools.ietf.org/html/rfc4880#section-5.11
    ///
    /// Use `UserID::default()` to get a UserID with a default settings.
    value: Cow<'static, [u8]>,

    hash_algo_security: OnceCell<HashAlgoSecurity>,

    parsed: OnceCell<ConventionallyParsedUserID>,
}
assert_send_and_sync!(UserID);

impl UserID {
    /// Returns a User ID.
    ///
    /// This is equivalent to using `UserID::from`, but the function
    /// is constant, and the slice must have a static lifetime.
    ///
    /// # Examples
    ///
    /// ```
    /// use sequoia_openpgp::packet::UserID;
    ///
    /// const TRUST_ROOT_USERID: UserID
    ///     = UserID::from_static_bytes(b"Local Trust Root");
    /// ```
    pub const fn from_static_bytes(u: &'static [u8]) -> Self {
        UserID {
            common: packet::Common::new(),
            hash_algo_security: OnceCell::new(),
            value: Cow::Borrowed(u),
            parsed: OnceCell::new(),
        }
    }
}

impl From<Vec<u8>> for UserID {
    fn from(u: Vec<u8>) -> Self {
        UserID {
            common: Default::default(),
            hash_algo_security: Default::default(),
            value: Cow::Owned(u),
            parsed: Default::default(),
        }
    }
}

impl From<&[u8]> for UserID {
    fn from(u: &[u8]) -> Self {
        u.to_vec().into()
    }
}

impl<'a> From<&'a str> for UserID {
    fn from(u: &'a str) -> Self {
        u.as_bytes().into()
    }
}

impl From<String> for UserID {
    fn from(u: String) -> Self {
        u.into_bytes().into()
    }
}

impl<'a> From<Cow<'a, str>> for UserID {
    fn from(u: Cow<'a, str>) -> Self {
        match u {
            Cow::Owned(u) => u.into(),
            Cow::Borrowed(u) => u.into(),
        }
    }
}

impl fmt::Display for UserID {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        let userid = String::from_utf8_lossy(&self.value[..]);
        write!(f, "{}", userid)
    }
}

impl fmt::Debug for UserID {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        let userid = String::from_utf8_lossy(&self.value[..]);

        f.debug_struct("UserID")
            .field("value", &userid)
            .finish()
    }
}

impl PartialEq for UserID {
    fn eq(&self, other: &UserID) -> bool {
        self.common == other.common
            && self.value == other.value
    }
}

impl Eq for UserID {
}

impl PartialOrd for UserID {
    fn partial_cmp(&self, other: &Self) -> Option<Ordering> {
        Some(self.cmp(other))
    }
}

impl Ord for UserID {
    fn cmp(&self, other: &Self) -> Ordering {
        self.common.cmp(&other.common).then_with(
            || self.value.cmp(&other.value))
    }
}

impl Hash for UserID {
    fn hash<H: Hasher>(&self, state: &mut H) {
        // We hash only the data; the cache does not implement hash.
        self.common.hash(state);
        self.value.hash(state);
    }
}

impl Clone for UserID {
    fn clone(&self) -> Self {
        UserID {
            common: self.common.clone(),
            hash_algo_security: self.hash_algo_security.clone(),
            value: self.value.clone(),
            parsed: if let Some(p) = self.parsed.get() {
                OnceCell::with_value(p.clone())
            } else {
                OnceCell::new()
            },
        }
    }
}

impl UserID {
    fn assemble(name: Option<&str>, comment: Option<&str>,
                address: &str, check_address: bool)
        -> Result<Self>
    {
        let mut value = String::with_capacity(64);

        // Make sure the individual components are valid.
        if let Some(ref name) = name {
            match ConventionallyParsedUserID::new(name.to_string()) {
                Err(err) =>
                    return Err(err.context(format!(
                        "Validating name ({:?})",
                        name))),
                Ok(p) => {
                    if !(p.name().is_some()
                         && p.comment().is_none()
                         && p.email().is_none()) {
                        return Err(Error::InvalidArgument(
                            format!("Invalid name ({:?})", name)).into());
                    }
                }
            }

            value.push_str(name);
        }

        if let Some(ref comment) = comment {
            match ConventionallyParsedUserID::new(
                format!("x ({})", comment))
            {
                Err(err) =>
                    return Err(err.context(format!(
                        "Validating comment ({:?})",
                        comment))),
                Ok(p) => {
                    if !(p.name().is_some()
                         && p.comment().is_some()
                         && p.email().is_none()) {
                    return Err(Error::InvalidArgument(
                        format!("Invalid comment ({:?})", comment)).into());
                    }
                }
            }

            if !value.is_empty() {
                value.push(' ');
            }
            value.push('(');
            value.push_str(comment);
            value.push(')');
        }

        if check_address {
            match ConventionallyParsedUserID::new(
                format!("<{}>", address))
            {
                Err(err) =>
                    return Err(err.context(format!(
                        "Validating address ({:?})",
                        address))),
                Ok(p) => {
                    if !(p.name().is_none()
                         && p.comment().is_none()
                         && p.email().is_some()) {
                        return Err(Error::InvalidArgument(
                            format!("Invalid address address ({:?})", address))
                                .into());
                    }
                }
            }
        }

        if !value.is_empty() {
            value.push(' ');
        }
        value.push('<');
        value.push_str(address);
        value.push('>');

        if check_address {
            // Make sure the combined thing is valid.
            match ConventionallyParsedUserID::new(value.clone())
            {
                Err(err) =>
                    return Err(err.context(format!(
                        "Validating User ID ({:?})",
                        value))),
                Ok(p) => {
                    if !(p.name().is_none() == name.is_none()
                         && p.comment().is_none() == comment.is_none()
                         && p.email().is_some()) {
                        return Err(Error::InvalidArgument(
                            format!("Invalid User ID ({:?})", value)).into());
                    }
                }
            }
        }

        Ok(UserID::from(value))
    }

    /// The security requirements of the hash algorithm for
    /// self-signatures.
    ///
    /// A cryptographic hash algorithm usually has [three security
    /// properties]: pre-image resistance, second pre-image
    /// resistance, and collision resistance.  If an attacker can
    /// influence the signed data, then the hash algorithm needs to
    /// have both second pre-image resistance, and collision
    /// resistance.  If not, second pre-image resistance is
    /// sufficient.
    ///
    ///   [three security properties]: https://en.wikipedia.org/wiki/Cryptographic_hash_function#Properties
    ///
    /// In general, an attacker may be able to influence third-party
    /// signatures.  But direct key signatures, and binding signatures
    /// are only over data fully determined by signer.  And, an
    /// attacker's control over self signatures over User IDs is
    /// limited due to their structure.
    ///
    /// In the case of self signatures over User IDs, an attacker may
    /// be able to control the content of the User ID packet.
    /// However, unlike an image, there is no easy way to hide large
    /// amounts of arbitrary data (e.g., the 512 bytes needed by the
    /// [SHA-1 is a Shambles] attack) from the user.  Further, normal
    /// User IDs are short and encoded using UTF-8.
    ///
    ///   [SHA-1 is a Shambles]: https://sha-mbles.github.io/
    ///
    /// These observations can be used to extend the life of a hash
    /// algorithm after its collision resistance has been partially
    /// compromised, but not completely broken.  Specifically for the
    /// case of User IDs, we relax the requirement for strong
    /// collision resistance for self signatures over User IDs if:
    ///
    ///   - The User ID is at most 96 bytes long,
    ///   - It contains valid UTF-8, and
    ///   - It doesn't contain a UTF-8 control character (this includes
    ///     the NUL byte).
    ///
    ///
    /// For more details, please refer to the documentation for
    /// [HashAlgoSecurity].
    ///
    ///   [HashAlgoSecurity]: crate::policy::HashAlgoSecurity
    pub fn hash_algo_security(&self) -> HashAlgoSecurity {
        self.hash_algo_security
            .get_or_init(|| {
                UserID::determine_hash_algo_security(&self.value)
            })
            .clone()
    }

    // See documentation for hash_algo_security.
    fn determine_hash_algo_security(u: &[u8]) -> HashAlgoSecurity {
        // SHA-1 has 64 byte (512-bit) blocks.  A block and a half (96
        // bytes) is more than enough for all but malicious users.
        if u.len() > 96 {
            return HashAlgoSecurity::CollisionResistance;
        }

        // Check that the User ID is valid UTF-8.
        match str::from_utf8(u) {
            Ok(s) => {
                // And doesn't contain control characters.
                if s.chars().any(char::is_control) {
                    return HashAlgoSecurity::CollisionResistance;
                }
            }
            Err(_err) => {
                return HashAlgoSecurity::CollisionResistance;
            }
        }

        HashAlgoSecurity::SecondPreImageResistance
    }

    /// Constructs a User ID.
    ///
    /// This does a basic check and any necessary escaping to form a
    /// [conventional User ID].
    ///
    /// Only the address is required.  If a comment is supplied, then
    /// a name is also required.
    ///
    /// If you already have a User ID value, then you can just
    /// use `UserID::from()`.
    ///
    ///   [conventional User ID]: #conventional-user-ids
    ///
    /// ```
    /// # fn main() -> sequoia_openpgp::Result<()> {
    /// # use sequoia_openpgp as openpgp;
    /// # use openpgp::packet::UserID;
    /// assert_eq!(UserID::from_address(
    ///                "John Smith".into(),
    ///                None,
    ///                "boat@example.org")?.value(),
    ///            &b"John Smith <boat@example.org>"[..]);
    ///
    /// assert_eq!(UserID::from_address(
    ///                "John Smith",
    ///                "Who is Advok?",
    ///                "boat@example.org")?.value(),
    ///            &b"John Smith (Who is Advok?) <boat@example.org>"[..]);
    /// # Ok(()) }
    /// ```
    pub fn from_address<O, S>(name: O, comment: O, email: S)
        -> Result<Self>
        where S: AsRef<str>,
              O: Into<Option<S>>
    {
        Self::assemble(name.into().as_ref().map(|s| s.as_ref()),
                       comment.into().as_ref().map(|s| s.as_ref()),
                       email.as_ref(),
                       true)
    }

    /// Constructs a User ID.
    ///
    /// This does a basic check and any necessary escaping to form a
    /// [conventional User ID] modulo the address, which is not
    /// checked.
    ///
    /// This is useful when you want to specify a URI instead of an
    /// email address.
    ///
    /// If you already have a User ID value, then you can just
    /// use `UserID::from()`.
    ///
    ///   [conventional User ID]: #conventional-user-ids
    ///
    /// ```
    /// # fn main() -> sequoia_openpgp::Result<()> {
    /// # use sequoia_openpgp as openpgp;
    /// # use openpgp::packet::UserID;
    /// assert_eq!(UserID::from_unchecked_address(
    ///                "NAS".into(),
    ///                None, "ssh://host.example.org")?.value(),
    ///            &b"NAS <ssh://host.example.org>"[..]);
    /// # Ok(()) }
    /// ```
    pub fn from_unchecked_address<O, S>(name: O, comment: O, address: S)
        -> Result<Self>
        where S: AsRef<str>,
              O: Into<Option<S>>
    {
        Self::assemble(name.into().as_ref().map(|s| s.as_ref()),
                       comment.into().as_ref().map(|s| s.as_ref()),
                       address.as_ref(),
                       false)
    }

    /// Gets the user ID packet's value.
    ///
    /// This returns the raw, uninterpreted value.  See
    /// [`UserID::name`], [`UserID::email`],
    /// [`UserID::email_normalized`], [`UserID::uri`], and
    /// [`UserID::comment`] for how to extract parts of [conventional
    /// User ID]s.
    ///
    ///   [`UserID::name`]: UserID::name()
    ///   [`UserID::email`]: UserID::email()
    ///   [`UserID::email_normalized`]: UserID::email_normalized()
    ///   [`UserID::uri`]: UserID::uri()
    ///   [`UserID::comment`]: UserID::comment()
    ///   [conventional User ID]: #conventional-user-ids
    pub fn value(&self) -> &[u8] {
        &self.value
    }

    fn do_parse(&self) -> Result<&ConventionallyParsedUserID> {
        self.parsed.get_or_try_init(|| {
            let s = str::from_utf8(&self.value)?;

            ConventionallyParsedUserID::new(s).map_err(|err| {
                // Return the error from the NameAddrOrOther parser.
                err.context(format!(
                    "Failed to parse User ID: {:?}", s))
            })
        })
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the name component, if any.
    ///
    /// See [conventional User ID] for more information.
    ///
    ///   [conventional User ID]: #conventional-user-ids
    pub fn name2(&self) -> Result<Option<&str>> {
        Ok(self.do_parse()?.name())
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the name component, if any.
    ///
    /// Like [`UserID::name2`], but heap-allocates.
    #[deprecated(note = "Use UserID::name2")]
    pub fn name(&self) -> Result<Option<String>> {
        Ok(self.do_parse()?.name().map(|s| s.to_string()))
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the comment field, if any.
    ///
    /// See [conventional User ID] for more information.
    ///
    ///   [conventional User ID]: #conventional-user-ids
    pub fn comment2(&self) -> Result<Option<&str>> {
        Ok(self.do_parse()?.comment())
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the comment field, if any.
    ///
    /// Like [`UserID::comment2`], but heap-allocates.
    #[deprecated(note = "Use UserID::comment2")]
    pub fn comment(&self) -> Result<Option<String>> {
        Ok(self.do_parse()?.comment().map(|s| s.to_string()))
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the email address, if any.
    ///
    /// See [conventional User ID] for more information.
    ///
    ///   [conventional User ID]: #conventional-user-ids
    pub fn email2(&self) -> Result<Option<&str>> {
        Ok(self.do_parse()?.email())
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the email address, if any.
    ///
    /// Like [`UserID::email2`], but heap-allocates.
    #[deprecated(note = "Use UserID::email2")]
    pub fn email(&self) -> Result<Option<String>> {
        Ok(self.do_parse()?.email().map(|s| s.to_string()))
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the URI, if any.
    ///
    /// See [conventional User ID] for more information.
    ///
    ///   [conventional User ID]: #conventional-user-ids
    pub fn uri2(&self) -> Result<Option<&str>> {
        Ok(self.do_parse()?.uri())
    }

    /// Parses the User ID according to de facto conventions, and
    /// returns the URI, if any.
    ///
    /// Like [`UserID::uri2`], but heap-allocates.
    #[deprecated(note = "Use UserID::uri2")]
    pub fn uri(&self) -> Result<Option<String>> {
        Ok(self.do_parse()?.uri().map(|s| s.to_string()))
    }

    /// Returns a normalized version of the UserID's email address.
    ///
    /// Normalized email addresses are primarily needed when email
    /// addresses are compared.
    ///
    /// Note: normalized email addresses are still valid email
    /// addresses.
    ///
    /// This function normalizes an email address by doing [puny-code
    /// normalization] on the domain, and lowercasing the local part in
    /// the so-called [empty locale].
    ///
    /// Note: this normalization procedure is the same as the
    /// normalization procedure recommended by [Autocrypt].
    ///
    ///   [puny-code normalization]: https://tools.ietf.org/html/rfc5891.html#section-4.4
    ///   [empty locale]: https://www.w3.org/International/wiki/Case_folding
    ///   [Autocrypt]: https://autocrypt.org/level1.html#e-mail-address-canonicalization
    pub fn email_normalized(&self) -> Result<Option<String>> {
        match self.email2()? {
            None => Ok(None),
            Some(address) => {
                let mut iter = address.split('@');
                let localpart = iter.next().expect("Invalid email address");
                let domain = iter.next().expect("Invalid email address");
                assert!(iter.next().is_none(), "Invalid email address");

                // Normalize Unicode in domains.
                let domain = idna::domain_to_ascii(domain)
                    .map_err(|e| anyhow::Error::from(e)
                             .context("punycode conversion failed"))?;

                // Join.
                let address = format!("{}@{}", localpart, domain);

                // Convert to lowercase without tailoring, i.e. without taking
                // any locale into account.  See:
                //
                //  - https://www.w3.org/International/wiki/Case_folding
                //  - https://doc.rust-lang.org/std/primitive.str.html#method.to_lowercase
                //  - http://www.unicode.org/versions/Unicode7.0.0/ch03.pdf#G33992
                let address = address.to_lowercase();

                Ok(Some(address))
            }
        }
    }
}

impl From<UserID> for Packet {
    fn from(s: UserID) -> Self {
        Packet::UserID(s)
    }
}

#[cfg(test)]
impl Arbitrary for UserID {
    fn arbitrary(g: &mut Gen) -> Self {
        Vec::<u8>::arbitrary(g).into()
    }
}

#[cfg(test)]
mod tests {
    use super::*;
    use crate::parse::Parse;
    use crate::serialize::MarshalInto;

    quickcheck! {
        fn roundtrip(p: UserID) -> bool {
            let q = UserID::from_bytes(&p.to_vec().unwrap()).unwrap();
            assert_eq!(p, q);
            true
        }
    }

    #[test]
    fn decompose() {
        tracer!(true, "decompose", 0);

        fn c(userid: &str,
             name: Option<&str>, comment: Option<&str>,
             email: Option<&str>, uri: Option<&str>)
            -> bool
        {
            assert!(email.is_none() || uri.is_none());
            t!("userid: {}, name: {:?}, comment: {:?}, email: {:?}, uri: {:?}",
               userid, name, comment, email, uri);

            match ConventionallyParsedUserID::new(userid) {
                Ok(puid) => {
                    let good = puid.name() == name
                        && puid.comment() == comment
                        && puid.email() == email
                        && puid.uri() == uri;

                    if ! good {
                        t!("userid: {}", userid);
                        t!(" -> {:?}", puid);
                        t!("  {:?} {}= {:?}",
                           puid.name(),
                           if puid.name() == name { "=" } else { "!" },
                           name);
                        t!("  {:?} {}= {:?}",
                           puid.comment(),
                           if puid.comment() == comment { "=" } else { "!" },
                           comment);
                        t!("  {:?} {}= {:?}",
                           puid.email(),
                           if puid.email() == email { "=" } else { "!" },
                           email);
                        t!("  {:?} {}= {:?}",
                           puid.uri(),
                           if puid.uri() == uri { "=" } else { "!" },
                           uri);

                        t!(" -> BAD PARSE");
                    }
                    good
                }
                Err(err) => {
                    t!("userid: {} -> PARSE ERROR: {:?}", userid, err);
                    false
                }
            }
        }

        let mut g = true;

        // Conventional User IDs:
        g &= c("First Last (Comment) <name@example.org>",
          Some("First Last"), Some("Comment"), Some("name@example.org"), None);
        g &= c("First Last <name@example.org>",
          Some("First Last"), None, Some("name@example.org"), None);
        g &= c("First Last", Some("First Last"), None, None, None);
        g &= c("name@example.org <name@example.org>",
          Some("name@example.org"), None, Some("name@example.org"), None);
        g &= c("<name@example.org>",
          None, None, Some("name@example.org"), None);
        g &= c("name@example.org",
          None, None, Some("name@example.org"), None);

        // Examples from dkg's mail:
        g &= c("Björn Björnson <bjoern@example.net>",
          Some("Björn Björnson"), None, Some("bjoern@example.net"), None);
        // We explicitly don't support RFC 2047 so the following is
        // correctly not escaped.
        g &= c("Bj=?utf-8?q?=C3=B6?=rn Bj=?utf-8?q?=C3=B6?=rnson \
           <bjoern@example.net>",
          Some("Bj=?utf-8?q?=C3=B6?=rn Bj=?utf-8?q?=C3=B6?=rnson"),
          None, Some("bjoern@example.net"), None);
        g &= c("Acme Industries, Inc. <info@acme.example>",
          Some("Acme Industries, Inc."), None, Some("info@acme.example"), None);
        g &= c("Michael O'Brian <obrian@example.biz>",
          Some("Michael O'Brian"), None, Some("obrian@example.biz"), None);
        g &= c("Smith, John <jsmith@example.com>",
          Some("Smith, John"), None, Some("jsmith@example.com"), None);
        g &= c("mariag@example.org",
          None, None, Some("mariag@example.org"), None);
        g &= c("joe@example.net <joe@example.net>",
          Some("joe@example.net"), None, Some("joe@example.net"), None);
        g &= c("иван.сергеев@пример.рф",
          None, None, Some("иван.сергеев@пример.рф"), None);
        g &= c("Dörte@Sörensen.example.com",
          None, None, Some("Dörte@Sörensen.example.com"), None);

        // Some craziness.

        g &= c("Vorname Nachname, Dr.",
               Some("Vorname Nachname, Dr."), None, None, None);
        g &= c("Vorname Nachname, Dr. <dr@example.org>",
               Some("Vorname Nachname, Dr."), None, Some("dr@example.org"), None);

        // Only the last comment counts as a comment.  The rest if
        // part of the name.
        g &= c("Foo (Bar) (Baz)",
          Some("Foo (Bar)"), Some("Baz"), None, None);
        // The same with extra whitespace.
        g &= c("Foo  (Bar)  (Baz)",
          Some("Foo  (Bar)"), Some("Baz"), None, None);
        g &= c("Foo  (Bar  (Baz)",
          Some("Foo  (Bar"), Some("Baz"), None, None);

        // Make sure whitespace is stripped.
        g &= c("  Name   Last   (   some  comment )   <name@example.org>",
               Some("Name   Last"), Some("some  comment"),
               Some("name@example.org"), None);

        // Make sure an email is a comment is recognized as a comment.
        g &= c(" Name Last (email@example.org)",
               Some("Name Last"), Some("email@example.org"), None, None);

        // Quoting in the local part of the email address is not
        // allowed, but it is recognized as a name.  That's fine.
        g &= c("\"user\"@example.org",
               Some("\"user\"@example.org"), None, None, None);
        // Even unbalanced quotes.
        g &= c("\"user@example.org",
               Some("\"user@example.org"), None, None, None);

        g &= c("Henry Ford (CEO) <henry@ford.com>",
               Some("Henry Ford"), Some("CEO"), Some("henry@ford.com"), None);

        g &= c("Thomas \"Tomakin\" (DHC) <thomas@clh.co.uk>",
               Some("Thomas \"Tomakin\""), Some("DHC"),
               Some("thomas@clh.co.uk"), None);

        g &= c("Aldous L. Huxley <huxley@old-world.org>",
               Some("Aldous L. Huxley"), None,
               Some("huxley@old-world.org"), None);


        // Some URIs.

        // Examples from https://tools.ietf.org/html/rfc3986#section-1.1.2
        g &= c("<ftp://ftp.is.co.za/rfc/rfc1808.txt>",
               None, None,
               None, Some("ftp://ftp.is.co.za/rfc/rfc1808.txt"));

        g &= c("<http://www.ietf.org/rfc/rfc2396.txt>",
               None, None,
               None, Some("http://www.ietf.org/rfc/rfc2396.txt"));

        g &= c("<ldap://[2001:db8::7]/c=GB?objectClass?one>",
               None, None,
               None, Some("ldap://[2001:db8::7]/c=GB?objectClass?one"));

        g &= c("<mailto:John.Doe@example.com>",
               None, None,
               None, Some("mailto:John.Doe@example.com"));

        g &= c("<news:comp.infosystems.www.servers.unix>",
               None, None,
               None, Some("news:comp.infosystems.www.servers.unix"));

        g &= c("<tel:+1-816-555-1212>",
               None, None,
               None, Some("tel:+1-816-555-1212"));

        g &= c("<telnet://192.0.2.16:80/>",
               None, None,
               None, Some("telnet://192.0.2.16:80/"));

        g &= c("<urn:oasis:names:specification:docbook:dtd:xml:4.1.2>",
               None, None,
               None, Some("urn:oasis:names:specification:docbook:dtd:xml:4.1.2"));



        g &= c("Foo's ssh server <ssh://hostname>",
               Some("Foo's ssh server"), None,
               None, Some("ssh://hostname"));

        g &= c("Foo (ssh server) <ssh://hostname>",
               Some("Foo"), Some("ssh server"),
               None, Some("ssh://hostname"));

        g &= c("<ssh://hostname>",
               None, None,
               None, Some("ssh://hostname"));

        g &= c("Warez <ftp://127.0.0.1>",
               Some("Warez"), None,
               None, Some("ftp://127.0.0.1"));

        g &= c("ssh://hostname",
               None, None,
               None, Some("ssh://hostname"));

        g &= c("ssh:hostname",
               None, None,
               None, Some("ssh:hostname"));

        g &= c("Frank Füber <ssh://ïntérnätïònál.eu>",
               Some("Frank Füber"), None,
               None, Some("ssh://ïntérnätïònál.eu"));

        g &= c("ssh://ïntérnätïònál.eu",
               None, None,
               None, Some("ssh://ïntérnätïònál.eu"));

        g &= c("<foo://domain.org>",
               None, None,
               None, Some("foo://domain.org"));

        g &= c("<foo-bar://domain.org>",
               None, None,
               None, Some("foo-bar://domain.org"));

        g &= c("<foo+bar://domain.org>",
               None, None,
               None, Some("foo+bar://domain.org"));

        g &= c("<foo.bar://domain.org>",
               None, None,
               None, Some("foo.bar://domain.org"));

        g &= c("<foo.bar://domain.org#anchor?query>",
               None, None,
               None, Some("foo.bar://domain.org#anchor?query"));

        // Is it an email address or a URI?  It should show up as a URI.
        g &= c("<foo://user:password@domain.org>",
               None, None,
               None, Some("foo://user:password@domain.org"));

        // Ports...
        g &= c("<foo://domain.org:348>",
               None, None,
               None, Some("foo://domain.org:348"));

        g &= c("<foo://domain.org:348/>",
               None, None,
               None, Some("foo://domain.org:348/"));

        // Some test vectors from
        // https://github.com/cweb/iri-tests/blob/master/iris.txt
        g &= c("<http://[:]>", None, None, None, Some("http://[:]"));
        g &= c("<http://2001:db8::1>", None, None, None, Some("http://2001:db8::1"));
        g &= c("<http://[www.google.com]/>", None, None, None, Some("http://[www.google.com]/"));
        g &= c("<http:////////user:@google.com:99?foo>", None, None, None, Some("http:////////user:@google.com:99?foo"));
        g &= c("<http:path>", None, None, None, Some("http:path"));
        g &= c("<http:/path>", None, None, None, Some("http:/path"));
        g &= c("<http:host>", None, None, None, Some("http:host"));
        g &= c("<http://user:pass@foo:21/bar;par?b#c>", None, None, None,
               Some("http://user:pass@foo:21/bar;par?b#c"));
        g &= c("<http:foo.com>", None, None, None, Some("http:foo.com"));
        g &= c("<http://f:/c>", None, None, None, Some("http://f:/c"));
        g &= c("<http://f:0/c>", None, None, None, Some("http://f:0/c"));
        g &= c("<http://f:00000000000000/c>", None, None, None, Some("http://f:00000000000000/c"));
        g &= c("<http://f:&#x000A;/c>", None, None, None, Some("http://f:&#x000A;/c"));
        g &= c("<http://f:fifty-two/c>", None, None, None, Some("http://f:fifty-two/c"));
        g &= c("<foo://>", None, None, None, Some("foo://"));
        g &= c("<http://a:b@c:29/d>", None, None, None, Some("http://a:b@c:29/d"));
        g &= c("<http::@c:29>", None, None, None, Some("http::@c:29"));
        g &= c("<http://&amp;a:foo(b]c@d:2/>", None, None, None, Some("http://&amp;a:foo(b]c@d:2/"));
        g &= c("<http://iris.test.ing/re&#x301;sume&#x301;/re&#x301;sume&#x301;.html>", None, None, None, Some("http://iris.test.ing/re&#x301;sume&#x301;/re&#x301;sume&#x301;.html"));
        g &= c("<http://google.com/foo[bar]>", None, None, None, Some("http://google.com/foo[bar]"));

        if !g {
            panic!("Parse error");
        }
    }

    #[test]
    fn compose() {
        tracer!(true, "compose", 0);

        fn c(userid: &str,
             name: Option<&str>, comment: Option<&str>,
             email: Option<&str>, uri: Option<&str>)
        {
            assert!(email.xor(uri).is_some());
            t!("userid: {}, name: {:?}, comment: {:?}, email: {:?}, uri: {:?}",
               userid, name, comment, email, uri);

            if let Some(email) = email {
                let uid = UserID::from_address(name, comment, email).unwrap();
                assert_eq!(userid, String::from_utf8_lossy(uid.value()));
            }

            if let Some(uri) = uri {
                let uid =
                    UserID::from_unchecked_address(name, comment, uri).unwrap();
                assert_eq!(userid, String::from_utf8_lossy(uid.value()));
            }
        }

        // Conventional User IDs:
        c("First Last (Comment) <name@example.org>",
          Some("First Last"), Some("Comment"), Some("name@example.org"), None);
        c("First Last <name@example.org>",
          Some("First Last"), None, Some("name@example.org"), None);
        c("<name@example.org>",
          None, None, Some("name@example.org"), None);
    }

    // Make sure we can't parse non conventional User IDs.
    #[test]
    fn decompose_non_conventional() {
        // Empty string is not allowed.
        assert!(ConventionallyParsedUserID::new("").is_err());
        // Likewise, only whitespace.
        assert!(ConventionallyParsedUserID::new(" ").is_err());
        assert!(ConventionallyParsedUserID::new("   ").is_err());

        // Double dots are not allowed.
        assert!(ConventionallyParsedUserID::new(
            "<a..b@example.org>").is_err());
        // Nor are dots at the start or end of the local part.
        assert!(ConventionallyParsedUserID::new(
            "<dr.@example.org>").is_err());
        assert!(ConventionallyParsedUserID::new(
            "<.drb@example.org>").is_err());

        assert!(ConventionallyParsedUserID::new(
            "<hallo> <hello@example.org>").is_err());
        assert!(ConventionallyParsedUserID::new(
            "<hallo <hello@example.org>").is_err());
        assert!(ConventionallyParsedUserID::new(
            "hallo> <hello@example.org>").is_err());

        // No @.
        assert!(ConventionallyParsedUserID::new(
            "foo <example.org>").is_err());
        // Two @s.
        assert!(ConventionallyParsedUserID::new(
            "Huxley <huxley@@old-world.org>").is_err());

        // Unfortunately, the following is accepted as a name:
        //
        // assert!(ConventionallyParsedUserID::new(
        //     "huxley@@old-world.org").is_err());

        // No local part.
        assert!(ConventionallyParsedUserID::new(
            "foo <@example.org>").is_err());

        // No leading/ending dot in the email address.
        assert!(ConventionallyParsedUserID::new(
            "<huxley@.old-world.org>").is_err());
        assert!(ConventionallyParsedUserID::new(
            "<huxley@old-world.org.>").is_err());

        // Unfortunately, the following are recognized as names:
        //
        // assert!(ConventionallyParsedUserID::new(
        //     "huxley@.old-world.org").is_err());
        // assert!(ConventionallyParsedUserID::new(
        //     "huxley@old-world.org.").is_err());

        // Need something in the local part.
        assert!(ConventionallyParsedUserID::new(
            "<@old-world.org>").is_err());

        // Unfortunately, the following is recognized as a name:
        //
        // assert!(ConventionallyParsedUserID::new(
        //     "@old-world.org").is_err());


        // URI schemas must be ASCII.
        assert!(ConventionallyParsedUserID::new(
            "<über://domain.org>").is_err());

        // Whitespace is not allowed.
        assert!(ConventionallyParsedUserID::new(
            "<http://some domain.org>").is_err());
    }

    #[test]
    fn email_normalized() {
        fn c(value: &str, expected: &str) {
            let u = UserID::from(value);
            let got = u.email_normalized().unwrap().unwrap();
            assert_eq!(expected, got);
        }

        c("Henry Ford (CEO) <henry@ford.com>", "henry@ford.com");
        c("Henry Ford (CEO) <Henry@Ford.com>", "henry@ford.com");
        c("Henry Ford (CEO) <Henry@Ford.com>", "henry@ford.com");
        c("hans@bücher.tld", "hans@xn--bcher-kva.tld");
        c("hANS@bücher.tld", "hans@xn--bcher-kva.tld");
    }

    #[test]
    fn from_address() {
        assert_eq!(UserID::from_address(None, None, "foo@bar.com")
                       .unwrap().value(),
                   b"<foo@bar.com>");
        assert!(UserID::from_address(None, None, "foo@@bar.com").is_err());
        assert_eq!(UserID::from_address("Foo Q. Bar".into(), None, "foo@bar.com")
                      .unwrap().value(),
                   b"Foo Q. Bar <foo@bar.com>");
    }

    #[test]
    fn hash_algo_security() {
        // Acceptable.
        assert_eq!(UserID::from("Alice Lovelace <alice@lovelace.org>")
                   .hash_algo_security(),
                   HashAlgoSecurity::SecondPreImageResistance);

        // Embedded NUL.
        assert_eq!(UserID::from(&b"Alice Lovelace <alice@lovelace.org>\0"[..])
                   .hash_algo_security(),
                   HashAlgoSecurity::CollisionResistance);
        assert_eq!(
            UserID::from(
                &b"Alice Lovelace <alice@lovelace.org>\0Hidden!"[..])
                .hash_algo_security(),
            HashAlgoSecurity::CollisionResistance);

        // Long strings.
        assert_eq!(
            UserID::from(String::from_utf8(vec![b'a'; 90]).unwrap())
                .hash_algo_security(),
            HashAlgoSecurity::SecondPreImageResistance);
        assert_eq!(
            UserID::from(String::from_utf8(vec![b'a'; 100]).unwrap())
                .hash_algo_security(),
            HashAlgoSecurity::CollisionResistance);
    }
}