solana_program/
fee_calculator.rs

//! Calculation of transaction fees.

#![allow(clippy::arithmetic_side_effects)]
use {
    crate::{clock::DEFAULT_MS_PER_SLOT, ed25519_program, message::Message, secp256k1_program},
    log::*,
};

#[derive(Serialize, Deserialize, Default, PartialEq, Eq, Clone, Copy, Debug, AbiExample)]
#[serde(rename_all = "camelCase")]
pub struct FeeCalculator {
    /// The current cost of a signature.
    ///
    /// This amount may increase/decrease over time based on cluster processing
    /// load.
    pub lamports_per_signature: u64,
}

impl FeeCalculator {
    pub fn new(lamports_per_signature: u64) -> Self {
        Self {
            lamports_per_signature,
        }
    }

    #[deprecated(
        since = "1.9.0",
        note = "Please do not use, will no longer be available in the future"
    )]
    pub fn calculate_fee(&self, message: &Message) -> u64 {
        let mut num_signatures: u64 = 0;
        for instruction in &message.instructions {
            let program_index = instruction.program_id_index as usize;
            // Message may not be sanitized here
            if program_index < message.account_keys.len() {
                let id = message.account_keys[program_index];
                if (secp256k1_program::check_id(&id) || ed25519_program::check_id(&id))
                    && !instruction.data.is_empty()
                {
                    num_signatures += instruction.data[0] as u64;
                }
            }
        }

        self.lamports_per_signature
            * (u64::from(message.header.num_required_signatures) + num_signatures)
    }
}

#[derive(Serialize, Deserialize, PartialEq, Eq, Clone, Debug, AbiExample)]
#[serde(rename_all = "camelCase")]
pub struct FeeRateGovernor {
    // The current cost of a signature  This amount may increase/decrease over time based on
    // cluster processing load.
    #[serde(skip)]
    pub lamports_per_signature: u64,

    // The target cost of a signature when the cluster is operating around target_signatures_per_slot
    // signatures
    pub target_lamports_per_signature: u64,

    // Used to estimate the desired processing capacity of the cluster.  As the signatures for
    // recent slots are fewer/greater than this value, lamports_per_signature will decrease/increase
    // for the next slot.  A value of 0 disables lamports_per_signature fee adjustments
    pub target_signatures_per_slot: u64,

    pub min_lamports_per_signature: u64,
    pub max_lamports_per_signature: u64,

    // What portion of collected fees are to be destroyed, as a fraction of std::u8::MAX
    pub burn_percent: u8,
}

pub const DEFAULT_TARGET_LAMPORTS_PER_SIGNATURE: u64 = 10_000;
pub const DEFAULT_TARGET_SIGNATURES_PER_SLOT: u64 = 50 * DEFAULT_MS_PER_SLOT;

// Percentage of tx fees to burn
pub const DEFAULT_BURN_PERCENT: u8 = 50;

impl Default for FeeRateGovernor {
    fn default() -> Self {
        Self {
            lamports_per_signature: 0,
            target_lamports_per_signature: DEFAULT_TARGET_LAMPORTS_PER_SIGNATURE,
            target_signatures_per_slot: DEFAULT_TARGET_SIGNATURES_PER_SLOT,
            min_lamports_per_signature: 0,
            max_lamports_per_signature: 0,
            burn_percent: DEFAULT_BURN_PERCENT,
        }
    }
}

impl FeeRateGovernor {
    pub fn new(target_lamports_per_signature: u64, target_signatures_per_slot: u64) -> Self {
        let base_fee_rate_governor = Self {
            target_lamports_per_signature,
            lamports_per_signature: target_lamports_per_signature,
            target_signatures_per_slot,
            ..FeeRateGovernor::default()
        };

        Self::new_derived(&base_fee_rate_governor, 0)
    }

    pub fn new_derived(
        base_fee_rate_governor: &FeeRateGovernor,
        latest_signatures_per_slot: u64,
    ) -> Self {
        let mut me = base_fee_rate_governor.clone();

        if me.target_signatures_per_slot > 0 {
            // lamports_per_signature can range from 50% to 1000% of
            // target_lamports_per_signature
            me.min_lamports_per_signature = std::cmp::max(1, me.target_lamports_per_signature / 2);
            me.max_lamports_per_signature = me.target_lamports_per_signature * 10;

            // What the cluster should charge at `latest_signatures_per_slot`
            let desired_lamports_per_signature =
                me.max_lamports_per_signature
                    .min(me.min_lamports_per_signature.max(
                        me.target_lamports_per_signature
                            * std::cmp::min(latest_signatures_per_slot, std::u32::MAX as u64)
                            / me.target_signatures_per_slot,
                    ));

            trace!(
                "desired_lamports_per_signature: {}",
                desired_lamports_per_signature
            );

            let gap = desired_lamports_per_signature as i64
                - base_fee_rate_governor.lamports_per_signature as i64;

            if gap == 0 {
                me.lamports_per_signature = desired_lamports_per_signature;
            } else {
                // Adjust fee by 5% of target_lamports_per_signature to produce a smooth
                // increase/decrease in fees over time.
                let gap_adjust =
                    std::cmp::max(1, me.target_lamports_per_signature / 20) as i64 * gap.signum();

                trace!(
                    "lamports_per_signature gap is {}, adjusting by {}",
                    gap,
                    gap_adjust
                );

                me.lamports_per_signature =
                    me.max_lamports_per_signature
                        .min(me.min_lamports_per_signature.max(
                            (base_fee_rate_governor.lamports_per_signature as i64 + gap_adjust)
                                as u64,
                        ));
            }
        } else {
            me.lamports_per_signature = base_fee_rate_governor.target_lamports_per_signature;
            me.min_lamports_per_signature = me.target_lamports_per_signature;
            me.max_lamports_per_signature = me.target_lamports_per_signature;
        }
        debug!(
            "new_derived(): lamports_per_signature: {}",
            me.lamports_per_signature
        );
        me
    }

    pub fn clone_with_lamports_per_signature(&self, lamports_per_signature: u64) -> Self {
        Self {
            lamports_per_signature,
            ..*self
        }
    }

    /// calculate unburned fee from a fee total, returns (unburned, burned)
    pub fn burn(&self, fees: u64) -> (u64, u64) {
        let burned = fees * u64::from(self.burn_percent) / 100;
        (fees - burned, burned)
    }

    /// create a FeeCalculator based on current cluster signature throughput
    pub fn create_fee_calculator(&self) -> FeeCalculator {
        FeeCalculator::new(self.lamports_per_signature)
    }
}

#[cfg(test)]
mod tests {
    use {
        super::*,
        crate::{pubkey::Pubkey, system_instruction},
    };

    #[test]
    fn test_fee_rate_governor_burn() {
        let mut fee_rate_governor = FeeRateGovernor::default();
        assert_eq!(fee_rate_governor.burn(2), (1, 1));

        fee_rate_governor.burn_percent = 0;
        assert_eq!(fee_rate_governor.burn(2), (2, 0));

        fee_rate_governor.burn_percent = 100;
        assert_eq!(fee_rate_governor.burn(2), (0, 2));
    }

    #[test]
    #[allow(deprecated)]
    fn test_fee_calculator_calculate_fee() {
        // Default: no fee.
        let message = Message::default();
        assert_eq!(FeeCalculator::default().calculate_fee(&message), 0);

        // No signature, no fee.
        assert_eq!(FeeCalculator::new(1).calculate_fee(&message), 0);

        // One signature, a fee.
        let pubkey0 = Pubkey::from([0; 32]);
        let pubkey1 = Pubkey::from([1; 32]);
        let ix0 = system_instruction::transfer(&pubkey0, &pubkey1, 1);
        let message = Message::new(&[ix0], Some(&pubkey0));
        assert_eq!(FeeCalculator::new(2).calculate_fee(&message), 2);

        // Two signatures, double the fee.
        let ix0 = system_instruction::transfer(&pubkey0, &pubkey1, 1);
        let ix1 = system_instruction::transfer(&pubkey1, &pubkey0, 1);
        let message = Message::new(&[ix0, ix1], Some(&pubkey0));
        assert_eq!(FeeCalculator::new(2).calculate_fee(&message), 4);
    }

    #[test]
    #[allow(deprecated)]
    fn test_fee_calculator_calculate_fee_secp256k1() {
        use crate::instruction::Instruction;
        let pubkey0 = Pubkey::from([0; 32]);
        let pubkey1 = Pubkey::from([1; 32]);
        let ix0 = system_instruction::transfer(&pubkey0, &pubkey1, 1);
        let mut secp_instruction = Instruction {
            program_id: crate::secp256k1_program::id(),
            accounts: vec![],
            data: vec![],
        };
        let mut secp_instruction2 = Instruction {
            program_id: crate::secp256k1_program::id(),
            accounts: vec![],
            data: vec![1],
        };

        let message = Message::new(
            &[
                ix0.clone(),
                secp_instruction.clone(),
                secp_instruction2.clone(),
            ],
            Some(&pubkey0),
        );
        assert_eq!(FeeCalculator::new(1).calculate_fee(&message), 2);

        secp_instruction.data = vec![0];
        secp_instruction2.data = vec![10];
        let message = Message::new(&[ix0, secp_instruction, secp_instruction2], Some(&pubkey0));
        assert_eq!(FeeCalculator::new(1).calculate_fee(&message), 11);
    }

    #[test]
    fn test_fee_rate_governor_derived_default() {
        solana_logger::setup();

        let f0 = FeeRateGovernor::default();
        assert_eq!(
            f0.target_signatures_per_slot,
            DEFAULT_TARGET_SIGNATURES_PER_SLOT
        );
        assert_eq!(
            f0.target_lamports_per_signature,
            DEFAULT_TARGET_LAMPORTS_PER_SIGNATURE
        );
        assert_eq!(f0.lamports_per_signature, 0);

        let f1 = FeeRateGovernor::new_derived(&f0, DEFAULT_TARGET_SIGNATURES_PER_SLOT);
        assert_eq!(
            f1.target_signatures_per_slot,
            DEFAULT_TARGET_SIGNATURES_PER_SLOT
        );
        assert_eq!(
            f1.target_lamports_per_signature,
            DEFAULT_TARGET_LAMPORTS_PER_SIGNATURE
        );
        assert_eq!(
            f1.lamports_per_signature,
            DEFAULT_TARGET_LAMPORTS_PER_SIGNATURE / 2
        ); // min
    }

    #[test]
    fn test_fee_rate_governor_derived_adjust() {
        solana_logger::setup();

        let mut f = FeeRateGovernor {
            target_lamports_per_signature: 100,
            target_signatures_per_slot: 100,
            ..FeeRateGovernor::default()
        };
        f = FeeRateGovernor::new_derived(&f, 0);

        // Ramp fees up
        let mut count = 0;
        loop {
            let last_lamports_per_signature = f.lamports_per_signature;

            f = FeeRateGovernor::new_derived(&f, std::u64::MAX);
            info!("[up] f.lamports_per_signature={}", f.lamports_per_signature);

            // some maximum target reached
            if f.lamports_per_signature == last_lamports_per_signature {
                break;
            }
            // shouldn't take more than 1000 steps to get to minimum
            assert!(count < 1000);
            count += 1;
        }

        // Ramp fees down
        let mut count = 0;
        loop {
            let last_lamports_per_signature = f.lamports_per_signature;
            f = FeeRateGovernor::new_derived(&f, 0);

            info!(
                "[down] f.lamports_per_signature={}",
                f.lamports_per_signature
            );

            // some minimum target reached
            if f.lamports_per_signature == last_lamports_per_signature {
                break;
            }

            // shouldn't take more than 1000 steps to get to minimum
            assert!(count < 1000);
            count += 1;
        }

        // Arrive at target rate
        let mut count = 0;
        while f.lamports_per_signature != f.target_lamports_per_signature {
            f = FeeRateGovernor::new_derived(&f, f.target_signatures_per_slot);
            info!(
                "[target] f.lamports_per_signature={}",
                f.lamports_per_signature
            );
            // shouldn't take more than 100 steps to get to target
            assert!(count < 100);
            count += 1;
        }
    }
}
solana_program/fee_calculator.rs

solana_program/
fee_calculator.rs
