Struct arrow_buffer::IntervalMonthDayNano

#[repr(C)]
pub struct IntervalMonthDayNano {
    pub months: i32,
    pub days: i32,
    pub nanoseconds: i64,
}

Value of an IntervalMonthDayNano array

Representation

This type is stored as a single 128 bit integer, interpreted as three different signed integral fields:

1. The number of months (32 bits)
2. The number days (32 bits)
3. The number of nanoseconds (64 bits).

Nanoseconds does not allow for leap seconds.

Each field is independent (e.g. there is no constraint that the quantity of nanoseconds represents less than a day’s worth of time).

┌───────────────┬─────────────┬─────────────────────────────┐
│     Months    │     Days    │            Nanos            │
│   (32 bits)   │  (32 bits)  │          (64 bits)          │
└───────────────┴─────────────┴─────────────────────────────┘
0            32             64                           128 bit offset

Please see the Arrow Spec for more details

Note on Comparing and Ordering for Calendar Types

Values of IntervalMonthDayNano are compared using their binary representation, which can lead to surprising results.

Spans of time measured in calendar units are not fixed in absolute size (e.g. number of seconds) which makes defining comparisons and ordering non trivial. For example 1 month is 28 days for February but 1 month is 31 days in December.

This makes the seemingly simple operation of comparing two intervals complicated in practice. For example is 1 month more or less than 30 days? The answer depends on what month you are talking about.

This crate defines comparisons for calendar types using their binary representation which is fast and efficient, but leads to potentially surprising results.

For example a IntervalMonthDayNano of 1 month will compare as greater than a IntervalMonthDayNano of 100 days because the binary representation of 1 month is larger than the binary representation of 100 days.

Fields

months: i32

days: i32

nanoseconds: i64

Implementations

impl IntervalMonthDayNano

pub const ZERO: Self = _

The additive identity i.e. 0.

pub const ONE: Self = _

The multiplicative identity, i.e. 1.

pub const MINUS_ONE: Self = _

The multiplicative inverse, i.e. -1.

pub const MAX: Self = _

The maximum value that can be represented

pub const MIN: Self = _

The minimum value that can be represented

pub const fn new(months: i32, days: i32, nanoseconds: i64) -> Self

Create a new IntervalMonthDayNano

pub fn wrapping_abs(self) -> Self

Computes the absolute value

pub fn checked_abs(self) -> Option<Self>

Computes the absolute value

pub fn wrapping_neg(self) -> Self

Negates the value

pub fn checked_neg(self) -> Option<Self>

Negates the value

pub fn wrapping_add(self, other: Self) -> Self

Performs wrapping addition

pub fn checked_add(self, other: Self) -> Option<Self>

Performs checked addition

pub fn wrapping_sub(self, other: Self) -> Self

Performs wrapping subtraction

pub fn checked_sub(self, other: Self) -> Option<Self>

Performs checked subtraction

pub fn wrapping_mul(self, other: Self) -> Self

Performs wrapping multiplication

pub fn checked_mul(self, other: Self) -> Option<Self>

Performs checked multiplication

pub fn wrapping_div(self, other: Self) -> Self

Performs wrapping division

pub fn checked_div(self, other: Self) -> Option<Self>

Performs checked division

pub fn wrapping_rem(self, other: Self) -> Self

Performs wrapping remainder

pub fn checked_rem(self, other: Self) -> Option<Self>

Performs checked remainder

pub fn wrapping_pow(self, exp: u32) -> Self

Performs wrapping exponentiation

pub fn checked_pow(self, exp: u32) -> Option<Self>

Performs checked exponentiation

Trait Implementations

impl<'a, 'b> Add<&'b IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the + operator.

fn add(self, rhs: &'b IntervalMonthDayNano) -> Self::Output

Performs the + operation.

impl<'a> Add<&'a IntervalMonthDayNano> for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the + operator.

fn add(self, rhs: &'a IntervalMonthDayNano) -> Self::Output

Performs the + operation.

impl<'a> Add<IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the + operator.

fn add(self, rhs: IntervalMonthDayNano) -> Self::Output

Performs the + operation.

impl Add for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the + operator.

fn add(self, rhs: Self) -> Self::Output

Performs the + operation.

impl AddAssign for IntervalMonthDayNano

fn add_assign(&mut self, rhs: Self)

Performs the += operation.

impl ArrowNativeType for IntervalMonthDayNano

fn from_usize(_: usize) -> Option<Self>

Convert native integer type from usize

fn as_usize(self) -> usize

Convert to usize according to the as operator

fn usize_as(i: usize) -> Self

Convert from usize according to the as operator

fn to_usize(self) -> Option<usize>

Convert native type to usize.

fn to_isize(self) -> Option<isize>

Convert native type to isize.

fn to_i64(self) -> Option<i64>

Convert native type to i64.

fn get_byte_width() -> usize

Returns the byte width of this native type.

fn from_i32(_: i32) -> Option<Self>

👎Deprecated: please use Option::Some instead

Convert native type from i32.

fn from_i64(_: i64) -> Option<Self>

👎Deprecated: please use Option::Some instead

Convert native type from i64.

fn from_i128(_: i128) -> Option<Self>

👎Deprecated: please use Option::Some instead

Convert native type from i128.

impl Clone for IntervalMonthDayNano

fn clone(&self) -> IntervalMonthDayNano

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for IntervalMonthDayNano

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for IntervalMonthDayNano

fn default() -> IntervalMonthDayNano

Returns the “default value” for a type.

impl<'a, 'b> Div<&'b IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the / operator.

fn div(self, rhs: &'b IntervalMonthDayNano) -> Self::Output

Performs the / operation.

impl<'a> Div<&'a IntervalMonthDayNano> for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the / operator.

fn div(self, rhs: &'a IntervalMonthDayNano) -> Self::Output

Performs the / operation.

impl<'a> Div<IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the / operator.

fn div(self, rhs: IntervalMonthDayNano) -> Self::Output

Performs the / operation.

impl Div for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the / operator.

fn div(self, rhs: Self) -> Self::Output

Performs the / operation.

impl DivAssign for IntervalMonthDayNano

fn div_assign(&mut self, rhs: Self)

Performs the /= operation.

impl Hash for IntervalMonthDayNano

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<'a, 'b> Mul<&'b IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the * operator.

fn mul(self, rhs: &'b IntervalMonthDayNano) -> Self::Output

Performs the * operation.

impl<'a> Mul<&'a IntervalMonthDayNano> for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the * operator.

fn mul(self, rhs: &'a IntervalMonthDayNano) -> Self::Output

Performs the * operation.

impl<'a> Mul<IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the * operator.

fn mul(self, rhs: IntervalMonthDayNano) -> Self::Output

Performs the * operation.

impl Mul for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the * operator.

fn mul(self, rhs: Self) -> Self::Output

Performs the * operation.

impl MulAssign for IntervalMonthDayNano

fn mul_assign(&mut self, rhs: Self)

Performs the *= operation.

impl Neg for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the - operator.

fn neg(self) -> Self::Output

Performs the unary - operation.

impl Ord for IntervalMonthDayNano

fn cmp(&self, other: &IntervalMonthDayNano) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for IntervalMonthDayNano

fn eq(&self, other: &IntervalMonthDayNano) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for IntervalMonthDayNano

fn partial_cmp(&self, other: &IntervalMonthDayNano) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a, 'b> Rem<&'b IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the % operator.

fn rem(self, rhs: &'b IntervalMonthDayNano) -> Self::Output

Performs the % operation.

impl<'a> Rem<&'a IntervalMonthDayNano> for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the % operator.

fn rem(self, rhs: &'a IntervalMonthDayNano) -> Self::Output

Performs the % operation.

impl<'a> Rem<IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the % operator.

fn rem(self, rhs: IntervalMonthDayNano) -> Self::Output

Performs the % operation.

impl Rem for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the % operator.

fn rem(self, rhs: Self) -> Self::Output

Performs the % operation.

impl RemAssign for IntervalMonthDayNano

fn rem_assign(&mut self, rhs: Self)

Performs the %= operation.

impl<'a, 'b> Sub<&'b IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the - operator.

fn sub(self, rhs: &'b IntervalMonthDayNano) -> Self::Output

Performs the - operation.

impl<'a> Sub<&'a IntervalMonthDayNano> for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the - operator.

fn sub(self, rhs: &'a IntervalMonthDayNano) -> Self::Output

Performs the - operation.

impl<'a> Sub<IntervalMonthDayNano> for &'a IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the - operator.

fn sub(self, rhs: IntervalMonthDayNano) -> Self::Output

Performs the - operation.

impl Sub for IntervalMonthDayNano

type Output = IntervalMonthDayNano

The resulting type after applying the - operator.

fn sub(self, rhs: Self) -> Self::Output

Performs the - operation.

impl SubAssign for IntervalMonthDayNano

fn sub_assign(&mut self, rhs: Self)

Performs the -= operation.

impl Copy for IntervalMonthDayNano

impl Eq for IntervalMonthDayNano

impl StructuralPartialEq for IntervalMonthDayNano