Struct async_std::pin::Pin

1.33.0 · source ·
#[repr(transparent)]
pub struct Pin<Ptr> { /* private fields */ }
Available on unstable only.
Expand description

A pointer which pins its pointee in place.

Pin is a wrapper around some kind of pointer Ptr which makes that pointer “pin” its pointee value in place, thus preventing the value referenced by that pointer from being moved or otherwise invalidated at that place in memory unless it implements Unpin.

See the pin module documentation for a more thorough exploration of pinning.

§Pinning values with Pin<Ptr>

In order to pin a value, we wrap a pointer to that value (of some type Ptr) in a Pin<Ptr>. Pin<Ptr> can wrap any pointer type, forming a promise that the pointee will not be moved or otherwise invalidated. If the pointee value’s type implements Unpin, we are free to disregard these requirements entirely and can wrap any pointer to that value in Pin directly via Pin::new. If the pointee value’s type does not implement Unpin, then Rust will not let us use the Pin::new function directly and we’ll need to construct a Pin-wrapped pointer in one of the more specialized manners discussed below.

We call such a Pin-wrapped pointer a pinning pointer (or pinning ref, or pinning Box, etc.) because its existence is the thing that is pinning the underlying pointee in place: it is the metaphorical “pin” securing the data in place on the pinboard (in memory).

It is important to stress that the thing in the Pin is not the value which we want to pin itself, but rather a pointer to that value! A Pin<Ptr> does not pin the Ptr but rather the pointer’s pointee value.

The most common set of types which require pinning related guarantees for soundness are the compiler-generated state machines that implement Future for the return value of async fns. These compiler-generated Futures may contain self-referential pointers, one of the most common use cases for Pin. More details on this point are provided in the pin module docs, but suffice it to say they require the guarantees provided by pinning to be implemented soundly.

This requirement for the implementation of async fns means that the Future trait requires all calls to poll to use a self: Pin<&mut Self> parameter instead of the usual &mut self. Therefore, when manually polling a future, you will need to pin it first.

You may notice that async fn-sourced Futures are only a small percentage of all Futures that exist, yet we had to modify the signature of poll for all Futures to accommodate them. This is unfortunate, but there is a way that the language attempts to alleviate the extra friction that this API choice incurs: the Unpin trait.

The vast majority of Rust types have no reason to ever care about being pinned. These types implement the Unpin trait, which entirely opts all values of that type out of pinning-related guarantees. For values of these types, pinning a value by pointing to it with a Pin<Ptr> will have no actual effect.

The reason this distinction exists is exactly to allow APIs like Future::poll to take a Pin<Ptr> as an argument for all types while only forcing Future types that actually care about pinning guarantees pay the ergonomics cost. For the majority of Future types that don’t have a reason to care about being pinned and therefore implement Unpin, the Pin<&mut Self> will act exactly like a regular &mut Self, allowing direct access to the underlying value. Only types that don’t implement Unpin will be restricted.

§Pinning a value of a type that implements Unpin

If the type of the value you need to “pin” implements Unpin, you can trivially wrap any pointer to that value in a Pin by calling Pin::new.

use std::pin::Pin;

// Create a value of a type that implements `Unpin`
let mut unpin_future = std::future::ready(5);

// Pin it by creating a pinning mutable reference to it (ready to be `poll`ed!)
let my_pinned_unpin_future: Pin<&mut _> = Pin::new(&mut unpin_future);

§Pinning a value inside a Box

The simplest and most flexible way to pin a value that does not implement Unpin is to put that value inside a Box and then turn that Box into a “pinning Box” by wrapping it in a Pin. You can do both of these in a single step using Box::pin. Let’s see an example of using this flow to pin a Future returned from calling an async fn, a common use case as described above.

use std::pin::Pin;

async fn add_one(x: u32) -> u32 {
    x + 1
}

// Call the async function to get a future back
let fut = add_one(42);

// Pin the future inside a pinning box
let pinned_fut: Pin<Box<_>> = Box::pin(fut);

If you have a value which is already boxed, for example a Box<dyn Future>, you can pin that value in-place at its current memory address using Box::into_pin.

use std::pin::Pin;
use std::future::Future;

async fn add_one(x: u32) -> u32 {
    x + 1
}

fn boxed_add_one(x: u32) -> Box<dyn Future<Output = u32>> {
    Box::new(add_one(x))
}

let boxed_fut = boxed_add_one(42);

// Pin the future inside the existing box
let pinned_fut: Pin<Box<_>> = Box::into_pin(boxed_fut);

There are similar pinning methods offered on the other standard library smart pointer types as well, like Rc and Arc.

§Pinning a value on the stack using pin!

There are some situations where it is desirable or even required (for example, in a #[no_std] context where you don’t have access to the standard library or allocation in general) to pin a value which does not implement Unpin to its location on the stack. Doing so is possible using the pin! macro. See its documentation for more.

§Layout and ABI

Pin<Ptr> is guaranteed to have the same memory layout and ABI1 as Ptr.


  1. There is a bit of nuance here that is still being decided about whether the aliasing semantics of Pin<&mut T> should be different than &mut T, but this is true as of today. 

Implementations§

source§

impl<Ptr> Pin<Ptr>
where Ptr: Deref, <Ptr as Deref>::Target: Unpin,

1.33.0 (const: unstable) · source

pub fn new(pointer: Ptr) -> Pin<Ptr>

Constructs a new Pin<Ptr> around a pointer to some data of a type that implements Unpin.

Unlike Pin::new_unchecked, this method is safe because the pointer Ptr dereferences to an Unpin type, which cancels the pinning guarantees.

§Examples
use std::pin::Pin;

let mut val: u8 = 5;

// Since `val` doesn't care about being moved, we can safely create a "facade" `Pin`
// which will allow `val` to participate in `Pin`-bound apis  without checking that
// pinning guarantees are actually upheld.
let mut pinned: Pin<&mut u8> = Pin::new(&mut val);
1.39.0 (const: unstable) · source

pub fn into_inner(pin: Pin<Ptr>) -> Ptr

Unwraps this Pin<Ptr>, returning the underlying pointer.

Doing this operation safely requires that the data pointed at by this pinning pointer implements Unpin so that we can ignore the pinning invariants when unwrapping it.

§Examples
use std::pin::Pin;

let mut val: u8 = 5;
let pinned: Pin<&mut u8> = Pin::new(&mut val);

// Unwrap the pin to get the underlying mutable reference to the value. We can do
// this because `val` doesn't care about being moved, so the `Pin` was just
// a "facade" anyway.
let r = Pin::into_inner(pinned);
assert_eq!(*r, 5);
source§

impl<Ptr> Pin<Ptr>
where Ptr: Deref,

1.33.0 (const: unstable) · source

pub unsafe fn new_unchecked(pointer: Ptr) -> Pin<Ptr>

Constructs a new Pin<Ptr> around a reference to some data of a type that may or may not implement Unpin.

If pointer dereferences to an Unpin type, Pin::new should be used instead.

§Safety

This constructor is unsafe because we cannot guarantee that the data pointed to by pointer is pinned. At its core, pinning a value means making the guarantee that the value’s data will not be moved nor have its storage invalidated until it gets dropped. For a more thorough explanation of pinning, see the pin module docs.

If the caller that is constructing this Pin<Ptr> does not ensure that the data Ptr points to is pinned, that is a violation of the API contract and may lead to undefined behavior in later (even safe) operations.

By using this method, you are also making a promise about the Deref and DerefMut implementations of Ptr, if they exist. Most importantly, they must not move out of their self arguments: Pin::as_mut and Pin::as_ref will call DerefMut::deref_mut and Deref::deref on the pointer type Ptr and expect these methods to uphold the pinning invariants. Moreover, by calling this method you promise that the reference Ptr dereferences to will not be moved out of again; in particular, it must not be possible to obtain a &mut Ptr::Target and then move out of that reference (using, for example mem::swap).

For example, calling Pin::new_unchecked on an &'a mut T is unsafe because while you are able to pin it for the given lifetime 'a, you have no control over whether it is kept pinned once 'a ends, and therefore cannot uphold the guarantee that a value, once pinned, remains pinned until it is dropped:

use std::mem;
use std::pin::Pin;

fn move_pinned_ref<T>(mut a: T, mut b: T) {
    unsafe {
        let p: Pin<&mut T> = Pin::new_unchecked(&mut a);
        // This should mean the pointee `a` can never move again.
    }
    mem::swap(&mut a, &mut b); // Potential UB down the road ⚠️
    // The address of `a` changed to `b`'s stack slot, so `a` got moved even
    // though we have previously pinned it! We have violated the pinning API contract.
}

A value, once pinned, must remain pinned until it is dropped (unless its type implements Unpin). Because Pin<&mut T> does not own the value, dropping the Pin will not drop the value and will not end the pinning contract. So moving the value after dropping the Pin<&mut T> is still a violation of the API contract.

Similarly, calling Pin::new_unchecked on an Rc<T> is unsafe because there could be aliases to the same data that are not subject to the pinning restrictions:

use std::rc::Rc;
use std::pin::Pin;

fn move_pinned_rc<T>(mut x: Rc<T>) {
    // This should mean the pointee can never move again.
    let pin = unsafe { Pin::new_unchecked(Rc::clone(&x)) };
    {
        let p: Pin<&T> = pin.as_ref();
        // ...
    }
    drop(pin);

    let content = Rc::get_mut(&mut x).unwrap(); // Potential UB down the road ⚠️
    // Now, if `x` was the only reference, we have a mutable reference to
    // data that we pinned above, which we could use to move it as we have
    // seen in the previous example. We have violated the pinning API contract.
}
§Pinning of closure captures

Particular care is required when using Pin::new_unchecked in a closure: Pin::new_unchecked(&mut var) where var is a by-value (moved) closure capture implicitly makes the promise that the closure itself is pinned, and that all uses of this closure capture respect that pinning.

use std::pin::Pin;
use std::task::Context;
use std::future::Future;

fn move_pinned_closure(mut x: impl Future, cx: &mut Context<'_>) {
    // Create a closure that moves `x`, and then internally uses it in a pinned way.
    let mut closure = move || unsafe {
        let _ignore = Pin::new_unchecked(&mut x).poll(cx);
    };
    // Call the closure, so the future can assume it has been pinned.
    closure();
    // Move the closure somewhere else. This also moves `x`!
    let mut moved = closure;
    // Calling it again means we polled the future from two different locations,
    // violating the pinning API contract.
    moved(); // Potential UB ⚠️
}

When passing a closure to another API, it might be moving the closure any time, so Pin::new_unchecked on closure captures may only be used if the API explicitly documents that the closure is pinned.

The better alternative is to avoid all that trouble and do the pinning in the outer function instead (here using the pin! macro):

use std::pin::pin;
use std::task::Context;
use std::future::Future;

fn move_pinned_closure(mut x: impl Future, cx: &mut Context<'_>) {
    let mut x = pin!(x);
    // Create a closure that captures `x: Pin<&mut _>`, which is safe to move.
    let mut closure = move || {
        let _ignore = x.as_mut().poll(cx);
    };
    // Call the closure, so the future can assume it has been pinned.
    closure();
    // Move the closure somewhere else.
    let mut moved = closure;
    // Calling it again here is fine (except that we might be polling a future that already
    // returned `Poll::Ready`, but that is a separate problem).
    moved();
}
1.33.0 · source

pub fn as_ref(&self) -> Pin<&<Ptr as Deref>::Target>

Gets a shared reference to the pinned value this Pin points to.

This is a generic method to go from &Pin<Pointer<T>> to Pin<&T>. It is safe because, as part of the contract of Pin::new_unchecked, the pointee cannot move after Pin<Pointer<T>> got created. “Malicious” implementations of Pointer::Deref are likewise ruled out by the contract of Pin::new_unchecked.

source§

impl<Ptr> Pin<Ptr>
where Ptr: DerefMut,

1.33.0 · source

pub fn as_mut(&mut self) -> Pin<&mut <Ptr as Deref>::Target>

Gets a mutable reference to the pinned value this Pin<Ptr> points to.

This is a generic method to go from &mut Pin<Pointer<T>> to Pin<&mut T>. It is safe because, as part of the contract of Pin::new_unchecked, the pointee cannot move after Pin<Pointer<T>> got created. “Malicious” implementations of Pointer::DerefMut are likewise ruled out by the contract of Pin::new_unchecked.

This method is useful when doing multiple calls to functions that consume the pinning pointer.

§Example
use std::pin::Pin;

impl Type {
    fn method(self: Pin<&mut Self>) {
        // do something
    }

    fn call_method_twice(mut self: Pin<&mut Self>) {
        // `method` consumes `self`, so reborrow the `Pin<&mut Self>` via `as_mut`.
        self.as_mut().method();
        self.as_mut().method();
    }
}
source

pub fn as_deref_mut( self: Pin<&mut Pin<Ptr>>, ) -> Pin<&mut <Ptr as Deref>::Target>

🔬This is a nightly-only experimental API. (pin_deref_mut)

Gets Pin<&mut T> to the underlying pinned value from this nested Pin-pointer.

This is a generic method to go from Pin<&mut Pin<Pointer<T>>> to Pin<&mut T>. It is safe because the existence of a Pin<Pointer<T>> ensures that the pointee, T, cannot move in the future, and this method does not enable the pointee to move. “Malicious” implementations of Ptr::DerefMut are likewise ruled out by the contract of Pin::new_unchecked.

1.33.0 · source

pub fn set(&mut self, value: <Ptr as Deref>::Target)
where <Ptr as Deref>::Target: Sized,

Assigns a new value to the memory location pointed to by the Pin<Ptr>.

This overwrites pinned data, but that is okay: the original pinned value’s destructor gets run before being overwritten and the new value is also a valid value of the same type, so no pinning invariant is violated. See the pin module documentation for more information on how this upholds the pinning invariants.

§Example
use std::pin::Pin;

let mut val: u8 = 5;
let mut pinned: Pin<&mut u8> = Pin::new(&mut val);
println!("{}", pinned); // 5
pinned.set(10);
println!("{}", pinned); // 10
source§

impl<Ptr> Pin<Ptr>
where Ptr: Deref,

1.39.0 (const: unstable) · source

pub unsafe fn into_inner_unchecked(pin: Pin<Ptr>) -> Ptr

Unwraps this Pin<Ptr>, returning the underlying Ptr.

§Safety

This function is unsafe. You must guarantee that you will continue to treat the pointer Ptr as pinned after you call this function, so that the invariants on the Pin type can be upheld. If the code using the resulting Ptr does not continue to maintain the pinning invariants that is a violation of the API contract and may lead to undefined behavior in later (safe) operations.

Note that you must be able to guarantee that the data pointed to by Ptr will be treated as pinned all the way until its drop handler is complete!

For more information, see the pin module docs

If the underlying data is Unpin, Pin::into_inner should be used instead.

source§

impl<'a, T> Pin<&'a T>
where T: ?Sized,

1.33.0 · source

pub unsafe fn map_unchecked<U, F>(self, func: F) -> Pin<&'a U>
where F: FnOnce(&T) -> &U, U: ?Sized,

Constructs a new pin by mapping the interior value.

For example, if you wanted to get a Pin of a field of something, you could use this to get access to that field in one line of code. However, there are several gotchas with these “pinning projections”; see the pin module documentation for further details on that topic.

§Safety

This function is unsafe. You must guarantee that the data you return will not move so long as the argument value does not move (for example, because it is one of the fields of that value), and also that you do not move out of the argument you receive to the interior function.

1.33.0 (const: unstable) · source

pub fn get_ref(self) -> &'a T

Gets a shared reference out of a pin.

This is safe because it is not possible to move out of a shared reference. It may seem like there is an issue here with interior mutability: in fact, it is possible to move a T out of a &RefCell<T>. However, this is not a problem as long as there does not also exist a Pin<&T> pointing to the inner T inside the RefCell, and RefCell<T> does not let you get a Pin<&T> pointer to its contents. See the discussion on “pinning projections” for further details.

Note: Pin also implements Deref to the target, which can be used to access the inner value. However, Deref only provides a reference that lives for as long as the borrow of the Pin, not the lifetime of the reference contained in the Pin. This method allows turning the Pin into a reference with the same lifetime as the reference it wraps.

source§

impl<'a, T> Pin<&'a mut T>
where T: ?Sized,

1.33.0 (const: unstable) · source

pub fn into_ref(self) -> Pin<&'a T>

Converts this Pin<&mut T> into a Pin<&T> with the same lifetime.

1.33.0 (const: unstable) · source

pub fn get_mut(self) -> &'a mut T
where T: Unpin,

Gets a mutable reference to the data inside of this Pin.

This requires that the data inside this Pin is Unpin.

Note: Pin also implements DerefMut to the data, which can be used to access the inner value. However, DerefMut only provides a reference that lives for as long as the borrow of the Pin, not the lifetime of the Pin itself. This method allows turning the Pin into a reference with the same lifetime as the original Pin.

1.33.0 (const: unstable) · source

pub unsafe fn get_unchecked_mut(self) -> &'a mut T

Gets a mutable reference to the data inside of this Pin.

§Safety

This function is unsafe. You must guarantee that you will never move the data out of the mutable reference you receive when you call this function, so that the invariants on the Pin type can be upheld.

If the underlying data is Unpin, Pin::get_mut should be used instead.

1.33.0 · source

pub unsafe fn map_unchecked_mut<U, F>(self, func: F) -> Pin<&'a mut U>
where F: FnOnce(&mut T) -> &mut U, U: ?Sized,

Constructs a new pin by mapping the interior value.

For example, if you wanted to get a Pin of a field of something, you could use this to get access to that field in one line of code. However, there are several gotchas with these “pinning projections”; see the pin module documentation for further details on that topic.

§Safety

This function is unsafe. You must guarantee that the data you return will not move so long as the argument value does not move (for example, because it is one of the fields of that value), and also that you do not move out of the argument you receive to the interior function.

source§

impl<T> Pin<&'static T>
where T: ?Sized,

1.61.0 (const: unstable) · source

pub fn static_ref(r: &'static T) -> Pin<&'static T>

Gets a pinning reference from a &'static reference.

This is safe because T is borrowed immutably for the 'static lifetime, which never ends.

source§

impl<T> Pin<&'static mut T>
where T: ?Sized,

1.61.0 (const: unstable) · source

pub fn static_mut(r: &'static mut T) -> Pin<&'static mut T>

Gets a pinning mutable reference from a static mutable reference.

This is safe because T is borrowed for the 'static lifetime, which never ends.

Trait Implementations§

source§

impl<P> AsyncBufRead for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: AsyncBufRead,

source§

fn poll_fill_buf( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, ) -> Poll<Result<&[u8], Error>>

Attempt to return the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more
source§

fn consume(self: Pin<&mut Pin<P>>, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to poll_read. Read more
source§

impl<P> AsyncIterator for Pin<P>
where P: DerefMut, <P as Deref>::Target: AsyncIterator,

source§

type Item = <<P as Deref>::Target as AsyncIterator>::Item

🔬This is a nightly-only experimental API. (async_iterator)
The type of items yielded by the async iterator.
source§

fn poll_next( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, ) -> Poll<Option<<Pin<P> as AsyncIterator>::Item>>

🔬This is a nightly-only experimental API. (async_iterator)
Attempts to pull out the next value of this async iterator, registering the current task for wakeup if the value is not yet available, and returning None if the async iterator is exhausted. Read more
source§

fn size_hint(&self) -> (usize, Option<usize>)

🔬This is a nightly-only experimental API. (async_iterator)
Returns the bounds on the remaining length of the async iterator. Read more
source§

impl<P> AsyncRead for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: AsyncRead,

source§

fn poll_read( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, buf: &mut [u8], ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into buf. Read more
source§

fn poll_read_vectored( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, bufs: &mut [IoSliceMut<'_>], ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into bufs using vectored IO operations. Read more
source§

impl<P> AsyncSeek for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: AsyncSeek,

source§

fn poll_seek( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, pos: SeekFrom, ) -> Poll<Result<u64, Error>>

Attempt to seek to an offset, in bytes, in a stream. Read more
source§

impl<P> AsyncWrite for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: AsyncWrite,

source§

fn poll_write( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>

Attempt to write bytes from buf into the object. Read more
source§

fn poll_write_vectored( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>

Attempt to write bytes from bufs into the object using vectored IO operations. Read more
source§

fn poll_flush( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Attempt to flush the object, ensuring that any buffered data reach their destination. Read more
source§

fn poll_close( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Attempt to close the object. Read more
1.33.0 · source§

impl<Ptr> Clone for Pin<Ptr>
where Ptr: Clone,

source§

fn clone(&self) -> Pin<Ptr>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<G, R> Coroutine<R> for Pin<&mut G>
where G: Coroutine<R> + ?Sized,

source§

type Yield = <G as Coroutine<R>>::Yield

🔬This is a nightly-only experimental API. (coroutine_trait)
The type of value this coroutine yields. Read more
source§

type Return = <G as Coroutine<R>>::Return

🔬This is a nightly-only experimental API. (coroutine_trait)
The type of value this coroutine returns. Read more
source§

fn resume( self: Pin<&mut Pin<&mut G>>, arg: R, ) -> CoroutineState<<Pin<&mut G> as Coroutine<R>>::Yield, <Pin<&mut G> as Coroutine<R>>::Return>

🔬This is a nightly-only experimental API. (coroutine_trait)
Resumes the execution of this coroutine. Read more
source§

impl<G, R, A> Coroutine<R> for Pin<Box<G, A>>
where G: Coroutine<R> + ?Sized, A: Allocator + 'static,

source§

type Yield = <G as Coroutine<R>>::Yield

🔬This is a nightly-only experimental API. (coroutine_trait)
The type of value this coroutine yields. Read more
source§

type Return = <G as Coroutine<R>>::Return

🔬This is a nightly-only experimental API. (coroutine_trait)
The type of value this coroutine returns. Read more
source§

fn resume( self: Pin<&mut Pin<Box<G, A>>>, arg: R, ) -> CoroutineState<<Pin<Box<G, A>> as Coroutine<R>>::Yield, <Pin<Box<G, A>> as Coroutine<R>>::Return>

🔬This is a nightly-only experimental API. (coroutine_trait)
Resumes the execution of this coroutine. Read more
1.33.0 · source§

impl<Ptr> Debug for Pin<Ptr>
where Ptr: Debug,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.33.0 · source§

impl<Ptr> Deref for Pin<Ptr>
where Ptr: Deref,

source§

type Target = <Ptr as Deref>::Target

The resulting type after dereferencing.
source§

fn deref(&self) -> &<Ptr as Deref>::Target

Dereferences the value.
1.33.0 · source§

impl<Ptr> DerefMut for Pin<Ptr>
where Ptr: DerefMut, <Ptr as Deref>::Target: Unpin,

source§

fn deref_mut(&mut self) -> &mut <Ptr as Deref>::Target

Mutably dereferences the value.
1.33.0 · source§

impl<Ptr> Display for Pin<Ptr>
where Ptr: Display,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
1.33.0 · source§

impl<T, A> From<Box<T, A>> for Pin<Box<T, A>>
where A: Allocator + 'static, T: ?Sized,

source§

fn from(boxed: Box<T, A>) -> Pin<Box<T, A>>

Converts a Box<T> into a Pin<Box<T>>. If T does not implement Unpin, then *boxed will be pinned in memory and unable to be moved.

This conversion does not allocate on the heap and happens in place.

This is also available via Box::into_pin.

Constructing and pinning a Box with <Pin<Box<T>>>::from(Box::new(x)) can also be written more concisely using Box::pin(x). This From implementation is useful if you already have a Box<T>, or you are constructing a (pinned) Box in a different way than with Box::new.

source§

impl<P> FusedFuture for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: FusedFuture,

source§

fn is_terminated(&self) -> bool

Returns true if the underlying future should no longer be polled.
source§

impl<P> FusedStream for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: FusedStream,

source§

fn is_terminated(&self) -> bool

Returns true if the stream should no longer be polled.
1.36.0 · source§

impl<P> Future for Pin<P>
where P: DerefMut, <P as Deref>::Target: Future,

source§

type Output = <<P as Deref>::Target as Future>::Output

The type of value produced on completion.
source§

fn poll( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, ) -> Poll<<Pin<P> as Future>::Output>

Attempts to resolve the future to a final value, registering the current task for wakeup if the value is not yet available. Read more
1.41.0 · source§

impl<Ptr> Hash for Pin<Ptr>
where Ptr: Deref, <Ptr as Deref>::Target: Hash,

source§

fn hash<H>(&self, state: &mut H)
where H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
1.41.0 · source§

impl<Ptr> Ord for Pin<Ptr>
where Ptr: Deref, <Ptr as Deref>::Target: Ord,

source§

fn cmp(&self, other: &Pin<Ptr>) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
1.41.0 · source§

impl<Ptr, Q> PartialEq<Pin<Q>> for Pin<Ptr>
where Ptr: Deref, Q: Deref, <Ptr as Deref>::Target: PartialEq<<Q as Deref>::Target>,

source§

fn eq(&self, other: &Pin<Q>) -> bool

Tests for self and other values to be equal, and is used by ==.
source§

fn ne(&self, other: &Pin<Q>) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.41.0 · source§

impl<Ptr, Q> PartialOrd<Pin<Q>> for Pin<Ptr>
where Ptr: Deref, Q: Deref, <Ptr as Deref>::Target: PartialOrd<<Q as Deref>::Target>,

source§

fn partial_cmp(&self, other: &Pin<Q>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
source§

fn lt(&self, other: &Pin<Q>) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
source§

fn le(&self, other: &Pin<Q>) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
source§

fn gt(&self, other: &Pin<Q>) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
source§

fn ge(&self, other: &Pin<Q>) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
1.33.0 · source§

impl<Ptr> Pointer for Pin<Ptr>
where Ptr: Pointer,

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<P> Stream for Pin<P>
where P: DerefMut + Unpin, <P as Deref>::Target: Stream,

source§

type Item = <<P as Deref>::Target as Stream>::Item

Values yielded by the stream.
source§

fn poll_next( self: Pin<&mut Pin<P>>, cx: &mut Context<'_>, ) -> Poll<Option<<Pin<P> as Stream>::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more
source§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more
1.33.0 · source§

impl<Ptr, U> CoerceUnsized<Pin<U>> for Pin<Ptr>

1.33.0 · source§

impl<Ptr> Copy for Pin<Ptr>
where Ptr: Copy,

source§

impl<Ptr> DerefPure for Pin<Ptr>
where Ptr: DerefPure,

1.33.0 · source§

impl<Ptr, U> DispatchFromDyn<Pin<U>> for Pin<Ptr>

1.41.0 · source§

impl<Ptr> Eq for Pin<Ptr>
where Ptr: Deref, <Ptr as Deref>::Target: Eq,

1.33.0 · source§

impl<T> PinCoerceUnsized for Pin<T>

Auto Trait Implementations§

§

impl<Ptr> Freeze for Pin<Ptr>
where Ptr: Freeze,

§

impl<Ptr> RefUnwindSafe for Pin<Ptr>
where Ptr: RefUnwindSafe,

§

impl<Ptr> Send for Pin<Ptr>
where Ptr: Send,

§

impl<Ptr> Sync for Pin<Ptr>
where Ptr: Sync,

§

impl<Ptr> Unpin for Pin<Ptr>
where Ptr: Unpin,

§

impl<Ptr> UnwindSafe for Pin<Ptr>
where Ptr: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<R> AsyncBufReadExt for R
where R: AsyncBufRead + ?Sized,

source§

fn fill_buf(&mut self) -> FillBuf<'_, Self>
where Self: Unpin,

Returns the contents of the internal buffer, filling it with more data if empty. Read more
source§

fn consume(&mut self, amt: usize)
where Self: Unpin,

Consumes amt buffered bytes. Read more
source§

fn read_until<'a>( &'a mut self, byte: u8, buf: &'a mut Vec<u8>, ) -> ReadUntilFuture<'a, Self>
where Self: Unpin,

Reads all bytes and appends them into buf until the delimiter byte or EOF is found. Read more
source§

fn read_line<'a>(&'a mut self, buf: &'a mut String) -> ReadLineFuture<'a, Self>
where Self: Unpin,

Reads all bytes and appends them into buf until a newline (the 0xA byte) or EOF is found. Read more
source§

fn lines(self) -> Lines<Self>
where Self: Sized + Unpin,

Returns a stream over the lines of this byte stream. Read more
source§

fn split(self, byte: u8) -> Split<Self>
where Self: Sized,

Returns a stream over the contents of this reader split on the specified byte. Read more
source§

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadFuture<'a, Self>
where Self: Unpin,

Reads some bytes from the byte stream. Read more
source§

fn read_vectored<'a>( &'a mut self, bufs: &'a mut [IoSliceMut<'a>], ) -> ReadVectoredFuture<'a, Self>
where Self: Unpin,

Like read(), except it reads into a slice of buffers. Read more
source§

fn read_to_end<'a>( &'a mut self, buf: &'a mut Vec<u8>, ) -> ReadToEndFuture<'a, Self>
where Self: Unpin,

Reads the entire contents and appends them to a Vec. Read more
source§

fn read_to_string<'a>( &'a mut self, buf: &'a mut String, ) -> ReadToStringFuture<'a, Self>
where Self: Unpin,

Reads the entire contents and appends them to a String. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExactFuture<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
source§

fn bytes(self) -> Bytes<Self>
where Self: Sized,

Converts this AsyncRead into a Stream of bytes. Read more
source§

fn chain<R>(self, next: R) -> Chain<Self, R>
where R: AsyncRead, Self: Sized,

Creates an adapter which will chain this stream with another. Read more
source§

fn boxed_reader<'a>(self) -> Pin<Box<dyn AsyncRead + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the reader and changes its type to dyn AsyncRead + Send + 'a. Read more
source§

impl<S> AsyncSeekExt for S
where S: AsyncSeek + ?Sized,

source§

fn seek(&mut self, pos: SeekFrom) -> SeekFuture<'_, Self>
where Self: Unpin,

Seeks to a new position in a byte stream. Read more
source§

impl<W> AsyncWriteExt for W
where W: AsyncWrite + ?Sized,

source§

fn write<'a>(&'a mut self, buf: &'a [u8]) -> WriteFuture<'a, Self>
where Self: Unpin,

Writes some bytes into the byte stream. Read more
source§

fn write_vectored<'a>( &'a mut self, bufs: &'a [IoSlice<'a>], ) -> WriteVectoredFuture<'a, Self>
where Self: Unpin,

Like write(), except that it writes a slice of buffers. Read more
source§

fn write_all<'a>(&'a mut self, buf: &'a [u8]) -> WriteAllFuture<'a, Self>
where Self: Unpin,

Writes an entire buffer into the byte stream. Read more
source§

fn flush(&mut self) -> FlushFuture<'_, Self>
where Self: Unpin,

Flushes the stream to ensure that all buffered contents reach their destination. Read more
source§

fn close(&mut self) -> CloseFuture<'_, Self>
where Self: Unpin,

Closes the writer. Read more
source§

fn boxed_writer<'a>(self) -> Pin<Box<dyn AsyncWrite + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the writer and changes its type to dyn AsyncWrite + Send + 'a. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> BufReadExt for T
where T: AsyncBufRead + ?Sized,

source§

fn read_until<'a>( &'a mut self, byte: u8, buf: &'a mut Vec<u8>, ) -> ReadUntilFuture<'a, Self>
where Self: Unpin,

Reads all bytes into buf until the delimiter byte or EOF is reached. Read more
source§

fn read_line<'a>(&'a mut self, buf: &'a mut String) -> ReadLineFuture<'a, Self>
where Self: Unpin,

Reads all bytes and appends them into buf until a newline (the 0xA byte) is reached. Read more
source§

fn lines(self) -> Lines<Self>
where Self: Unpin + Sized,

Returns a stream over the lines of this byte stream. Read more
source§

fn split(self, byte: u8) -> Split<Self>
where Self: Sized,

Returns a stream over the contents of this reader split on the byte byte. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<F> FutureExt for F
where F: Future + ?Sized,

source§

fn poll(&mut self, cx: &mut Context<'_>) -> Poll<Self::Output>
where Self: Unpin,

A convenience for calling Future::poll() on !Unpin types.
source§

fn or<F>(self, other: F) -> Or<Self, F>
where Self: Sized, F: Future<Output = Self::Output>,

Returns the result of self or other future, preferring self if both are ready. Read more
source§

fn race<F>(self, other: F) -> Race<Self, F>
where Self: Sized, F: Future<Output = Self::Output>,

Returns the result of self or other future, with no preference if both are ready. Read more
source§

fn catch_unwind(self) -> CatchUnwind<Self>
where Self: Sized + UnwindSafe,

Catches panics while polling the future. Read more
source§

fn boxed<'a>(self) -> Pin<Box<dyn Future<Output = Self::Output> + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the future and changes its type to dyn Future + Send + 'a. Read more
source§

fn boxed_local<'a>(self) -> Pin<Box<dyn Future<Output = Self::Output> + 'a>>
where Self: Sized + 'a,

Boxes the future and changes its type to dyn Future + 'a. Read more
source§

impl<T> FutureExt for T
where T: Future + ?Sized,

source§

fn delay(self, dur: Duration) -> DelayFuture<Self>
where Self: Sized,

Available on unstable only.
Returns a Future that delays execution for a specified time. Read more
source§

fn flatten(self) -> FlattenFuture<Self, <Self::Output as IntoFuture>::Future>
where Self: Sized, <Self as Future>::Output: IntoFuture,

Available on unstable only.
Flatten out the execution of this future when the result itself can be converted into another future. Read more
source§

fn race<F>(self, other: F) -> Race<Self, F>
where Self: Future + Sized, F: Future<Output = <Self as Future>::Output>,

Available on unstable only.
Waits for one of two similarly-typed futures to complete. Read more
source§

fn try_race<F, T, E>(self, other: F) -> TryRace<Self, F>
where Self: Future<Output = Result<T, E>> + Sized, F: Future<Output = <Self as Future>::Output>,

Available on unstable only.
Waits for one of two similarly-typed fallible futures to complete. Read more
source§

fn join<F>(self, other: F) -> Join<Self, F>
where Self: Future + Sized, F: Future,

Available on unstable only.
Waits for two similarly-typed futures to complete. Read more
source§

fn try_join<F, A, B, E>(self, other: F) -> TryJoin<Self, F>
where Self: Future<Output = Result<A, E>> + Sized, F: Future<Output = Result<B, E>>,

Available on unstable only.
Waits for two similarly-typed fallible futures to complete. Read more
source§

fn timeout(self, dur: Duration) -> TimeoutFuture<Self>
where Self: Sized,

Available on unstable only.
Waits for both the future and a timeout, if the timeout completes before the future, it returns a TimeoutError. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<I> IntoAsyncIterator for I
where I: AsyncIterator,

source§

type Item = <I as AsyncIterator>::Item

🔬This is a nightly-only experimental API. (async_iterator)
The type of the item yielded by the iterator
source§

type IntoAsyncIter = I

🔬This is a nightly-only experimental API. (async_iterator)
The type of the resulting iterator
source§

fn into_async_iter(self) -> <I as IntoAsyncIterator>::IntoAsyncIter

🔬This is a nightly-only experimental API. (async_iterator)
Converts self into an async iterator
source§

impl<F> IntoFuture for F
where F: Future,

source§

type Output = <F as Future>::Output

The output that the future will produce on completion.
source§

type IntoFuture = F

Which kind of future are we turning this into?
source§

fn into_future(self) -> <F as IntoFuture>::IntoFuture

Creates a future from a value. Read more
source§

impl<T> IntoFuture for T
where T: Future,

source§

type Output = <T as Future>::Output

Available on unstable only.
The type of value produced on completion.
source§

type Future = T

Available on unstable only.
Which kind of future are we turning this into?
source§

fn into_future(self) -> <T as IntoFuture>::Future

Available on unstable only.
Create a future from a value
source§

impl<I> IntoStream for I
where I: Stream,

source§

type Item = <I as Stream>::Item

Available on unstable only.
The type of the elements being iterated over.
source§

type IntoStream = I

Available on unstable only.
Which kind of stream are we turning this into?
source§

fn into_stream(self) -> I

Available on unstable only.
Creates a stream from a value.
source§

impl<T> ReadExt for T
where T: AsyncRead + ?Sized,

source§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadFuture<'a, Self>
where Self: Unpin,

Reads some bytes from the byte stream. Read more
source§

fn read_vectored<'a>( &'a mut self, bufs: &'a mut [IoSliceMut<'a>], ) -> ReadVectoredFuture<'a, Self>
where Self: Unpin,

Like read, except that it reads into a slice of buffers. Read more
source§

fn read_to_end<'a>( &'a mut self, buf: &'a mut Vec<u8>, ) -> ReadToEndFuture<'a, Self>
where Self: Unpin,

Reads all bytes from the byte stream. Read more
source§

fn read_to_string<'a>( &'a mut self, buf: &'a mut String, ) -> ReadToStringFuture<'a, Self>
where Self: Unpin,

Reads all bytes from the byte stream and appends them into a string. Read more
source§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExactFuture<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adaptor which will read at most limit bytes from it. Read more
source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adaptor for this instance of Read. Read more
source§

fn bytes(self) -> Bytes<Self>
where Self: Sized,

Transforms this Read instance to a Stream over its bytes. Read more
source§

fn chain<R: Read>(self, next: R) -> Chain<Self, R>
where Self: Sized,

Creates an adaptor which will chain this stream with another. Read more
source§

impl<T> SeekExt for T
where T: AsyncSeek + ?Sized,

source§

fn seek(&mut self, pos: SeekFrom) -> SeekFuture<'_, Self>
where Self: Unpin,

Seeks to a new position in a byte stream. Read more
source§

impl<S> StreamExt for S
where S: Stream + ?Sized,

source§

fn poll_next(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>>
where Self: Unpin,

A convenience for calling Stream::poll_next() on !Unpin types.
source§

fn next(&mut self) -> NextFuture<'_, Self>
where Self: Unpin,

Retrieves the next item in the stream. Read more
source§

fn try_next<T, E>(&mut self) -> TryNextFuture<'_, Self>
where Self: Stream<Item = Result<T, E>> + Unpin,

Retrieves the next item in the stream. Read more
source§

fn count(self) -> CountFuture<Self>
where Self: Sized,

Counts the number of items in the stream. Read more
source§

fn map<T, F>(self, f: F) -> Map<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> T,

Maps items of the stream to new values using a closure. Read more
source§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where Self: Sized, U: Stream, F: FnMut(Self::Item) -> U,

Maps items to streams and then concatenates them. Read more
source§

fn flatten(self) -> Flatten<Self>
where Self: Sized, Self::Item: Stream,

Concatenates inner streams. Read more
source§

fn then<F, Fut>(self, f: F) -> Then<Self, F, Fut>
where Self: Sized, F: FnMut(Self::Item) -> Fut, Fut: Future,

Maps items of the stream to new values using an async closure. Read more
source§

fn filter<P>(self, predicate: P) -> Filter<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Keeps items of the stream for which predicate returns true. Read more
source§

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> Option<T>,

Filters and maps items of the stream using a closure. Read more
source§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Takes only the first n items of the stream. Read more
source§

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Takes items while predicate returns true. Read more
source§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Skips the first n items of the stream. Read more
source§

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Skips items while predicate returns true. Read more
source§

fn step_by(self, step: usize) -> StepBy<Self>
where Self: Sized,

Yields every stepth item. Read more
source§

fn chain<U>(self, other: U) -> Chain<Self, U>
where Self: Sized, U: Stream<Item = Self::Item>,

Appends another stream to the end of this one. Read more
source§

fn cloned<'a, T>(self) -> Cloned<Self>
where Self: Sized + Stream<Item = &'a T>, T: Clone + 'a,

Clones all items. Read more
source§

fn copied<'a, T>(self) -> Copied<Self>
where Self: Sized + Stream<Item = &'a T>, T: Copy + 'a,

Copies all items. Read more
source§

fn collect<C>(self) -> CollectFuture<Self, C>
where Self: Sized, C: Default + Extend<Self::Item>,

Collects all items in the stream into a collection. Read more
source§

fn try_collect<T, E, C>(self) -> TryCollectFuture<Self, C>
where Self: Sized + Stream<Item = Result<T, E>>, C: Default + Extend<T>,

Collects all items in the fallible stream into a collection. Read more
source§

fn partition<B, P>(self, predicate: P) -> PartitionFuture<Self, P, B>
where Self: Sized, B: Default + Extend<Self::Item>, P: FnMut(&Self::Item) -> bool,

Partitions items into those for which predicate is true and those for which it is false, and then collects them into two collections. Read more
source§

fn fold<T, F>(self, init: T, f: F) -> FoldFuture<Self, F, T>
where Self: Sized, F: FnMut(T, Self::Item) -> T,

Accumulates a computation over the stream. Read more
source§

fn try_fold<T, E, F, B>( &mut self, init: B, f: F, ) -> TryFoldFuture<'_, Self, F, B>
where Self: Sized + Stream<Item = Result<T, E>> + Unpin, F: FnMut(B, T) -> Result<B, E>,

Accumulates a fallible computation over the stream. Read more
source§

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>
where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

Maps items of the stream to new values using a state value and a closure. Read more
source§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Fuses the stream so that it stops yielding items after the first None. Read more
source§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats the stream from beginning to end, forever. Read more
source§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Enumerates items, mapping them to (index, item). Read more
source§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where Self: Sized, F: FnMut(&Self::Item),

Calls a closure on each item and passes it on. Read more
source§

fn nth(&mut self, n: usize) -> NthFuture<'_, Self>
where Self: Unpin,

Gets the nth item of the stream. Read more
source§

fn last(self) -> LastFuture<Self>
where Self: Sized,

Returns the last item in the stream. Read more
source§

fn find<P>(&mut self, predicate: P) -> FindFuture<'_, Self, P>
where Self: Unpin, P: FnMut(&Self::Item) -> bool,

Finds the first item of the stream for which predicate returns true. Read more
source§

fn find_map<F, B>(&mut self, f: F) -> FindMapFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> Option<B>,

Applies a closure to items in the stream and returns the first Some result. Read more
source§

fn position<P>(&mut self, predicate: P) -> PositionFuture<'_, Self, P>
where Self: Unpin, P: FnMut(Self::Item) -> bool,

Finds the index of the first item of the stream for which predicate returns true. Read more
source§

fn all<P>(&mut self, predicate: P) -> AllFuture<'_, Self, P>
where Self: Unpin, P: FnMut(Self::Item) -> bool,

Tests if predicate returns true for all items in the stream. Read more
source§

fn any<P>(&mut self, predicate: P) -> AnyFuture<'_, Self, P>
where Self: Unpin, P: FnMut(Self::Item) -> bool,

Tests if predicate returns true for any item in the stream. Read more
source§

fn for_each<F>(self, f: F) -> ForEachFuture<Self, F>
where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each item of the stream. Read more
source§

fn try_for_each<F, E>(&mut self, f: F) -> TryForEachFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> Result<(), E>,

Calls a fallible closure on each item of the stream, stopping on first error. Read more
source§

fn zip<U>(self, other: U) -> Zip<Self, U>
where Self: Sized, U: Stream,

Zips up two streams into a single stream of pairs. Read more
source§

fn unzip<A, B, FromA, FromB>(self) -> UnzipFuture<Self, FromA, FromB>
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Stream<Item = (A, B)>,

Collects a stream of pairs into a pair of collections. Read more
source§

fn or<S>(self, other: S) -> Or<Self, S>
where Self: Sized, S: Stream<Item = Self::Item>,

Merges with other stream, preferring items from self whenever both streams are ready. Read more
source§

fn race<S>(self, other: S) -> Race<Self, S>
where Self: Sized, S: Stream<Item = Self::Item>,

Merges with other stream, with no preference for either stream when both are ready. Read more
source§

fn drain(&mut self) -> Drain<'_, Self>

Yields all immediately available values from a stream. Read more
source§

fn boxed<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the stream and changes its type to dyn Stream + Send + 'a. Read more
source§

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a>>
where Self: Sized + 'a,

Boxes the stream and changes its type to dyn Stream + 'a. Read more
source§

impl<T> StreamExt for T
where T: Stream + ?Sized,

source§

fn next(&mut self) -> NextFuture<'_, Self>
where Self: Unpin,

Advances the stream and returns the next value. Read more
source§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a stream that yields its first n elements. Read more
source§

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates a stream that yields elements based on a predicate. Read more
source§

fn throttle(self, d: Duration) -> Throttle<Self>
where Self: Sized,

Available on unstable only.
Limit the amount of items yielded per timeslice in a stream. Read more
source§

fn step_by(self, step: usize) -> StepBy<Self>
where Self: Sized,

Creates a stream that yields each stepth element. Read more
source§

fn chain<U>(self, other: U) -> Chain<Self, U>
where Self: Sized, U: Stream<Item = Self::Item> + Sized,

Takes two streams and creates a new stream over both in sequence. Read more
source§

fn cloned<'a, T>(self) -> Cloned<Self>
where Self: Sized + Stream<Item = &'a T>, T: Clone + 'a,

Creates an stream which copies all of its elements. Read more
source§

fn copied<'a, T>(self) -> Copied<Self>
where Self: Sized + Stream<Item = &'a T>, T: Copy + 'a,

Creates an stream which copies all of its elements. Read more
source§

fn cycle(self) -> Cycle<Self>
where Self: Clone + Sized,

Creates a stream that yields the provided values infinitely and in order. Read more
source§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Creates a stream that gives the current element’s count as well as the next value. Read more
source§

fn delay(self, dur: Duration) -> Delay<Self>
where Self: Sized,

Available on unstable only.
Creates a stream that is delayed before it starts yielding items. Read more
source§

fn map<B, F>(self, f: F) -> Map<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> B,

Takes a closure and creates a stream that calls that closure on every element of this stream. Read more
source§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where Self: Sized, F: FnMut(&Self::Item),

A combinator that does something with each element in the stream, passing the value on. Read more
source§

fn last(self) -> LastFuture<Self, Self::Item>
where Self: Sized,

Returns the last element of the stream. Read more
source§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Creates a stream which ends after the first None. Read more
source§

fn filter<P>(self, predicate: P) -> Filter<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Creates a stream that uses a predicate to determine if an element should be yielded. Read more
source§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where Self: Sized, U: IntoStream, F: FnMut(Self::Item) -> U,

Available on unstable only.
Creates an stream that works like map, but flattens nested structure. Read more
source§

fn flatten(self) -> Flatten<Self>
where Self: Sized, Self::Item: IntoStream,

Available on unstable only.
Creates an stream that flattens nested structure. Read more
source§

fn filter_map<B, F>(self, f: F) -> FilterMap<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> Option<B>,

Both filters and maps a stream. Read more
source§

fn min_by_key<B, F>(self, key_by: F) -> MinByKeyFuture<Self, Self::Item, F>
where Self: Sized, B: Ord, F: FnMut(&Self::Item) -> B,

Returns the element that gives the minimum value with respect to the specified key function. If several elements are equally minimum, the first element is returned. If the stream is empty, None is returned. Read more
source§

fn max_by_key<B, F>(self, key_by: F) -> MaxByKeyFuture<Self, Self::Item, F>
where Self: Sized, B: Ord, F: FnMut(&Self::Item) -> B,

Returns the element that gives the maximum value with respect to the specified key function. If several elements are equally maximum, the first element is returned. If the stream is empty, None is returned. Read more
source§

fn min_by<F>(self, compare: F) -> MinByFuture<Self, F, Self::Item>
where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the minimum value with respect to the specified comparison function. If several elements are equally minimum, the first element is returned. If the stream is empty, None is returned. Read more
source§

fn max(self) -> MaxFuture<Self, Self::Item>
where Self: Sized, Self::Item: Ord,

Returns the element that gives the maximum value. If several elements are equally maximum, the first element is returned. If the stream is empty, None is returned. Read more
source§

fn min(self) -> MinFuture<Self, Self::Item>
where Self: Sized, Self::Item: Ord,

Returns the element that gives the minimum value. If several elements are equally minimum, the first element is returned. If the stream is empty, None is returned. Read more
source§

fn max_by<F>(self, compare: F) -> MaxByFuture<Self, F, Self::Item>
where Self: Sized, F: FnMut(&Self::Item, &Self::Item) -> Ordering,

Returns the element that gives the maximum value with respect to the specified comparison function. If several elements are equally maximum, the first element is returned. If the stream is empty, None is returned. Read more
source§

fn nth(&mut self, n: usize) -> NthFuture<'_, Self>
where Self: Unpin + Sized,

Returns the nth element of the stream. Read more
source§

fn all<F>(&mut self, f: F) -> AllFuture<'_, Self, F, Self::Item>
where Self: Unpin + Sized, F: FnMut(Self::Item) -> bool,

Tests if every element of the stream matches a predicate. Read more
source§

fn find<P>(&mut self, p: P) -> FindFuture<'_, Self, P>
where Self: Unpin + Sized, P: FnMut(&Self::Item) -> bool,

Searches for an element in a stream that satisfies a predicate. Read more
source§

fn find_map<F, B>(&mut self, f: F) -> FindMapFuture<'_, Self, F>
where Self: Unpin + Sized, F: FnMut(Self::Item) -> Option<B>,

Applies function to the elements of stream and returns the first non-none result. Read more
source§

fn fold<B, F>(self, init: B, f: F) -> FoldFuture<Self, F, B>
where Self: Sized, F: FnMut(B, Self::Item) -> B,

A combinator that applies a function to every element in a stream producing a single, final value. Read more
source§

fn partition<B, F>(self, f: F) -> PartitionFuture<Self, F, B>
where Self: Sized, F: FnMut(&Self::Item) -> bool, B: Default + Extend<Self::Item>,

Available on unstable only.
A combinator that applies a function to every element in a stream creating two collections from it. Read more
source§

fn for_each<F>(self, f: F) -> ForEachFuture<Self, F>
where Self: Sized, F: FnMut(Self::Item),

Call a closure on each element of the stream. Read more
source§

fn any<F>(&mut self, f: F) -> AnyFuture<'_, Self, F, Self::Item>
where Self: Unpin + Sized, F: FnMut(Self::Item) -> bool,

Tests if any element of the stream matches a predicate. Read more
source§

fn by_ref(&mut self) -> &mut Self

Available on unstable only.
Borrows an stream, rather than consuming it. Read more
source§

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>
where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

A stream adaptor similar to fold that holds internal state and produces a new stream. Read more
source§

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Combinator that skips elements based on a predicate. Read more
source§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a combinator that skips the first n elements. Read more
source§

fn timeout(self, dur: Duration) -> Timeout<Self>
where Self: Stream + Sized,

Available on unstable only.
Await a stream or times out after a duration of time. Read more
source§

fn try_fold<B, F, T, E>( &mut self, init: T, f: F, ) -> TryFoldFuture<'_, Self, F, T>
where Self: Unpin + Sized, F: FnMut(B, Self::Item) -> Result<T, E>,

A combinator that applies a function as long as it returns successfully, producing a single, final value. Immediately returns the error when the function returns unsuccessfully. Read more
source§

fn try_for_each<F, E>(&mut self, f: F) -> TryForEachFuture<'_, Self, F>
where Self: Unpin + Sized, F: FnMut(Self::Item) -> Result<(), E>,

Applies a falliable function to each element in a stream, stopping at first error and returning it. Read more
source§

fn zip<U>(self, other: U) -> Zip<Self, U>
where Self: Sized, U: Stream,

‘Zips up’ two streams into a single stream of pairs. Read more
source§

fn unzip<A, B, FromA, FromB>(self) -> UnzipFuture<Self, FromA, FromB>
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Stream<Item = (A, B)> + Sized,

Available on unstable only.
Converts an stream of pairs into a pair of containers. Read more
source§

fn collect<'a, B>(self) -> Pin<Box<dyn Future<Output = B> + Send + 'a>>
where Self: Sized + 'a + Send, B: FromStream<Self::Item>, Self::Item: Send,

Available on unstable only.
Transforms a stream into a collection. Read more
source§

fn merge<U>(self, other: U) -> Merge<Self, U>
where Self: Sized, U: Stream<Item = Self::Item> + Sized,

Available on unstable only.
Combines multiple streams into a single stream of all their outputs. Read more
source§

fn partial_cmp<S>(self, other: S) -> PartialCmpFuture<Self, S>
where Self: Sized + Stream, S: Stream, <Self as Stream>::Item: PartialOrd<S::Item>,

Lexicographically compares the elements of this Stream with those of another. Read more
source§

fn position<P>(&mut self, predicate: P) -> PositionFuture<'_, Self, P>
where Self: Unpin + Sized, P: FnMut(Self::Item) -> bool,

Searches for an element in a Stream that satisfies a predicate, returning its index. Read more
source§

fn cmp<S>(self, other: S) -> CmpFuture<Self, S>
where Self: Sized + Stream, S: Stream, <Self as Stream>::Item: Ord,

Lexicographically compares the elements of this Stream with those of another using ‘Ord’. Read more
source§

fn count(self) -> CountFuture<Self>
where Self: Sized,

Available on unstable only.
Counts the number of elements in the stream. Read more
source§

fn ne<S>(self, other: S) -> NeFuture<Self, S>
where Self: Sized, S: Sized + Stream, <Self as Stream>::Item: PartialEq<S::Item>,

Determines if the elements of this Stream are lexicographically not equal to those of another. Read more
source§

fn ge<S>(self, other: S) -> GeFuture<Self, S>
where Self: Sized + Stream, S: Stream, <Self as Stream>::Item: PartialOrd<S::Item>,

Determines if the elements of this Stream are lexicographically greater than or equal to those of another. Read more
source§

fn eq<S>(self, other: S) -> EqFuture<Self, S>
where Self: Sized + Stream, S: Sized + Stream, <Self as Stream>::Item: PartialEq<S::Item>,

Determines if the elements of this Stream are lexicographically equal to those of another. Read more
source§

fn gt<S>(self, other: S) -> GtFuture<Self, S>
where Self: Sized + Stream, S: Stream, <Self as Stream>::Item: PartialOrd<S::Item>,

Determines if the elements of this Stream are lexicographically greater than those of another. Read more
source§

fn le<S>(self, other: S) -> LeFuture<Self, S>
where Self: Sized + Stream, S: Stream, <Self as Stream>::Item: PartialOrd<S::Item>,

Determines if the elements of this Stream are lexicographically less or equal to those of another. Read more
source§

fn lt<S>(self, other: S) -> LtFuture<Self, S>
where Self: Sized + Stream, S: Stream, <Self as Stream>::Item: PartialOrd<S::Item>,

Determines if the elements of this Stream are lexicographically less than those of another. Read more
source§

fn sum<'a, S>(self) -> Pin<Box<dyn Future<Output = S> + 'a>>
where Self: Sized + Stream<Item = S> + 'a, S: Sum<Self::Item>,

Available on unstable only.
Sums the elements of a stream. Read more
source§

fn product<'a, P>(self) -> Pin<Box<dyn Future<Output = P> + 'a>>
where Self: Sized + Stream<Item = P> + 'a, P: Product,

Available on unstable only.
Multiplies all elements of the stream. Read more
source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<F, T, E> TryFuture for F
where F: Future<Output = Result<T, E>> + ?Sized,

source§

type Ok = T

The type of successful values yielded by this future
source§

type Error = E

The type of failures yielded by this future
source§

fn try_poll( self: Pin<&mut F>, cx: &mut Context<'_>, ) -> Poll<<F as Future>::Output>

Poll this TryFuture as if it were a Future. Read more
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T, E> TryStream for S
where S: Stream<Item = Result<T, E>> + ?Sized,

source§

type Ok = T

The type of successful values yielded by this future
source§

type Error = E

The type of failures yielded by this future
source§

fn try_poll_next( self: Pin<&mut S>, cx: &mut Context<'_>, ) -> Poll<Option<Result<<S as TryStream>::Ok, <S as TryStream>::Error>>>

Poll this TryStream as if it were a Stream. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> WriteExt for T
where T: AsyncWrite + ?Sized,

source§

fn write<'a>(&'a mut self, buf: &'a [u8]) -> WriteFuture<'a, Self>
where Self: Unpin,

Writes some bytes into the byte stream. Read more
source§

fn flush(&mut self) -> FlushFuture<'_, Self>
where Self: Unpin,

Flushes the stream to ensure that all buffered contents reach their destination. Read more
source§

fn write_vectored<'a>( &'a mut self, bufs: &'a [IoSlice<'a>], ) -> WriteVectoredFuture<'a, Self>
where Self: Unpin,

Like write, except that it writes from a slice of buffers. Read more
source§

fn write_all<'a>(&'a mut self, buf: &'a [u8]) -> WriteAllFuture<'a, Self>
where Self: Unpin,

Writes an entire buffer into the byte stream. Read more
source§

fn write_fmt<'a>(&'a mut self, fmt: Arguments<'_>) -> WriteFmtFuture<'a, Self>
where Self: Unpin,

Writes a formatted string into this writer, returning any error encountered. Read more