Struct CustomizableOperation Copy item path

impl<T, E, B> CustomizableOperation<T, E, B>

pub fn interceptor(self, interceptor: impl Intercept + 'static) -> Self

Adds an interceptor that runs at specific stages of the request execution pipeline.

Note that interceptors can also be added to CustomizableOperation by config_override, map_request, and mutate_request (the last two are implemented via interceptors under the hood). The order in which those user-specified operation interceptors are invoked should not be relied upon as it is an implementation detail.

pub fn map_request<F, MapE>(self, f: F) -> Self
where F: Fn(HttpRequest) -> Result<HttpRequest, MapE> + Send + Sync + 'static, MapE: Error + Send + Sync + 'static,

Allows for customizing the operation’s request.

pub fn mutate_request<F>(self, f: F) -> Self
where F: Fn(&mut HttpRequest) + Send + Sync + 'static,

Convenience for map_request where infallible direct mutation of request is acceptable.

pub fn config_override(self, config_override: impl Into<Builder>) -> Self

Overrides config for a single operation invocation.

config_override is applied to the operation configuration level. The fields in the builder that are Some override those applied to the service configuration level. For instance,

Config A	overridden by Config B	= Config C
field_1: None,	field_1: Some(v2),	field_1: Some(v2),
field_2: Some(v1),	field_2: Some(v2),	field_2: Some(v2),
field_3: Some(v1),	field_3: None,	field_3: Some(v1),

pub async fn send(self) -> Result<T, SdkError<E, HttpResponse>>
where E: Error + Send + Sync + 'static, B: CustomizableSend<T, E>,

Sends the request and returns the response.

Auto Trait Implementations§

impl<T, E, B> Freeze for CustomizableOperation<T, E, B>
where B: Freeze,

impl<T, E, B> !RefUnwindSafe for CustomizableOperation<T, E, B>

impl<T, E, B> Send for CustomizableOperation<T, E, B>
where B: Send, T: Send, E: Send,

impl<T, E, B> Sync for CustomizableOperation<T, E, B>
where B: Sync, T: Sync, E: Sync,

impl<T, E, B> Unpin for CustomizableOperation<T, E, B>
where B: Unpin, T: Unpin, E: Unpin,

impl<T, E, B> !UnwindSafe for CustomizableOperation<T, E, B>

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Paint for T
where T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Blink.

§Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::RapidBlink.

§Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example

println!("{}", value.clear());

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example

println!("{}", value.resetting());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> ErasedDestructor for T
where T: 'static,