#[non_exhaustive]pub struct LogStream {
pub log_stream_name: Option<String>,
pub creation_time: Option<i64>,
pub first_event_timestamp: Option<i64>,
pub last_event_timestamp: Option<i64>,
pub last_ingestion_time: Option<i64>,
pub upload_sequence_token: Option<String>,
pub arn: Option<String>,
pub stored_bytes: Option<i64>,
}Expand description
Represents a log stream, which is a sequence of log events from a single emitter of logs.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.log_stream_name: Option<String>The name of the log stream.
creation_time: Option<i64>The creation time of the stream, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC.
first_event_timestamp: Option<i64>The time of the first event, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC.
last_event_timestamp: Option<i64>The time of the most recent log event in the log stream in CloudWatch Logs. This number is expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. The lastEventTime value updates on an eventual consistency basis. It typically updates in less than an hour from ingestion, but in rare situations might take longer.
last_ingestion_time: Option<i64>The ingestion time, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC The lastIngestionTime value updates on an eventual consistency basis. It typically updates in less than an hour after ingestion, but in rare situations might take longer.
upload_sequence_token: Option<String>The sequence token.
The sequence token is now ignored in PutLogEvents actions. PutLogEvents actions are always accepted regardless of receiving an invalid sequence token. You don't need to obtain uploadSequenceToken to use a PutLogEvents action.
arn: Option<String>The Amazon Resource Name (ARN) of the log stream.
stored_bytes: Option<i64>The number of bytes stored.
Important: As of June 17, 2019, this parameter is no longer supported for log streams, and is always reported as zero. This change applies only to log streams. The storedBytes parameter for log groups is not affected.
Implementations§
Source§impl LogStream
impl LogStream
Sourcepub fn log_stream_name(&self) -> Option<&str>
pub fn log_stream_name(&self) -> Option<&str>
The name of the log stream.
Sourcepub fn creation_time(&self) -> Option<i64>
pub fn creation_time(&self) -> Option<i64>
The creation time of the stream, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC.
Sourcepub fn first_event_timestamp(&self) -> Option<i64>
pub fn first_event_timestamp(&self) -> Option<i64>
The time of the first event, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC.
Sourcepub fn last_event_timestamp(&self) -> Option<i64>
pub fn last_event_timestamp(&self) -> Option<i64>
The time of the most recent log event in the log stream in CloudWatch Logs. This number is expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. The lastEventTime value updates on an eventual consistency basis. It typically updates in less than an hour from ingestion, but in rare situations might take longer.
Sourcepub fn last_ingestion_time(&self) -> Option<i64>
pub fn last_ingestion_time(&self) -> Option<i64>
The ingestion time, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC The lastIngestionTime value updates on an eventual consistency basis. It typically updates in less than an hour after ingestion, but in rare situations might take longer.
Sourcepub fn upload_sequence_token(&self) -> Option<&str>
pub fn upload_sequence_token(&self) -> Option<&str>
The sequence token.
The sequence token is now ignored in PutLogEvents actions. PutLogEvents actions are always accepted regardless of receiving an invalid sequence token. You don't need to obtain uploadSequenceToken to use a PutLogEvents action.
Sourcepub fn stored_bytes(&self) -> Option<i64>
👎Deprecated: Starting on June 17, 2019, this parameter will be deprecated for log streams, and will be reported as zero. This change applies only to log streams. The storedBytes parameter for log groups is not affected.
pub fn stored_bytes(&self) -> Option<i64>
The number of bytes stored.
Important: As of June 17, 2019, this parameter is no longer supported for log streams, and is always reported as zero. This change applies only to log streams. The storedBytes parameter for log groups is not affected.
Trait Implementations§
impl StructuralPartialEq for LogStream
Auto Trait Implementations§
impl Freeze for LogStream
impl RefUnwindSafe for LogStream
impl Send for LogStream
impl Sync for LogStream
impl Unpin for LogStream
impl UnwindSafe for LogStream
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);