pub struct DescribeComplianceByConfigRuleFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to DescribeComplianceByConfigRule
.
Indicates whether the specified Config rules are compliant. If a rule is noncompliant, this operation returns the number of Amazon Web Services resources that do not comply with the rule.
A rule is compliant if all of the evaluated resources comply with it. It is noncompliant if any of these resources do not comply.
If Config has no current evaluation results for the rule, it returns INSUFFICIENT_DATA
. This result might indicate one of the following conditions:
-
Config has never invoked an evaluation for the rule. To check whether it has, use the
DescribeConfigRuleEvaluationStatus
action to get theLastSuccessfulInvocationTime
andLastFailedInvocationTime
. -
The rule's Lambda function is failing to send evaluation results to Config. Verify that the role you assigned to your configuration recorder includes the
config:PutEvaluations
permission. If the rule is a custom rule, verify that the Lambda execution role includes theconfig:PutEvaluations
permission. -
The rule's Lambda function has returned
NOT_APPLICABLE
for all evaluation results. This can occur if the resources were deleted or removed from the rule's scope.
Implementations§
Source§impl DescribeComplianceByConfigRuleFluentBuilder
impl DescribeComplianceByConfigRuleFluentBuilder
Sourcepub fn as_input(&self) -> &DescribeComplianceByConfigRuleInputBuilder
pub fn as_input(&self) -> &DescribeComplianceByConfigRuleInputBuilder
Access the DescribeComplianceByConfigRule as a reference.
Sourcepub async fn send(
self,
) -> Result<DescribeComplianceByConfigRuleOutput, SdkError<DescribeComplianceByConfigRuleError, HttpResponse>>
pub async fn send( self, ) -> Result<DescribeComplianceByConfigRuleOutput, SdkError<DescribeComplianceByConfigRuleError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DescribeComplianceByConfigRuleOutput, DescribeComplianceByConfigRuleError, Self>
pub fn customize( self, ) -> CustomizableOperation<DescribeComplianceByConfigRuleOutput, DescribeComplianceByConfigRuleError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> DescribeComplianceByConfigRulePaginator
pub fn into_paginator(self) -> DescribeComplianceByConfigRulePaginator
Create a paginator for this request
Paginators are used by calling send().await
which returns a PaginationStream
.
Sourcepub fn config_rule_names(self, input: impl Into<String>) -> Self
pub fn config_rule_names(self, input: impl Into<String>) -> Self
Appends an item to ConfigRuleNames
.
To override the contents of this collection use set_config_rule_names
.
Specify one or more Config rule names to filter the results by rule.
Sourcepub fn set_config_rule_names(self, input: Option<Vec<String>>) -> Self
pub fn set_config_rule_names(self, input: Option<Vec<String>>) -> Self
Specify one or more Config rule names to filter the results by rule.
Sourcepub fn get_config_rule_names(&self) -> &Option<Vec<String>>
pub fn get_config_rule_names(&self) -> &Option<Vec<String>>
Specify one or more Config rule names to filter the results by rule.
Sourcepub fn compliance_types(self, input: ComplianceType) -> Self
pub fn compliance_types(self, input: ComplianceType) -> Self
Appends an item to ComplianceTypes
.
To override the contents of this collection use set_compliance_types
.
Filters the results by compliance.
Sourcepub fn set_compliance_types(self, input: Option<Vec<ComplianceType>>) -> Self
pub fn set_compliance_types(self, input: Option<Vec<ComplianceType>>) -> Self
Filters the results by compliance.
Sourcepub fn get_compliance_types(&self) -> &Option<Vec<ComplianceType>>
pub fn get_compliance_types(&self) -> &Option<Vec<ComplianceType>>
Filters the results by compliance.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken
string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken
string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken
string returned on a previous page that you use to get the next page of results in a paginated response.
Trait Implementations§
Source§impl Clone for DescribeComplianceByConfigRuleFluentBuilder
impl Clone for DescribeComplianceByConfigRuleFluentBuilder
Source§fn clone(&self) -> DescribeComplianceByConfigRuleFluentBuilder
fn clone(&self) -> DescribeComplianceByConfigRuleFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for DescribeComplianceByConfigRuleFluentBuilder
impl !RefUnwindSafe for DescribeComplianceByConfigRuleFluentBuilder
impl Send for DescribeComplianceByConfigRuleFluentBuilder
impl Sync for DescribeComplianceByConfigRuleFluentBuilder
impl Unpin for DescribeComplianceByConfigRuleFluentBuilder
impl !UnwindSafe for DescribeComplianceByConfigRuleFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.bright_black());
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.bright_green());
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.bright_yellow());
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.bright_magenta());
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.bright_white());
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.on_bright_black());
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.on_bright_green());
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.on_bright_yellow());
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlue
.
§Example
println!("{}", value.on_bright_blue());
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.on_bright_magenta());
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightCyan
.
§Example
println!("{}", value.on_bright_cyan());
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.on_bright_white());
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::Underline
.
§Example
println!("{}", value.underline());
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::RapidBlink
.
§Example
println!("{}", value.rapid_blink());
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);