pub struct DescribeComplianceByResourceFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DescribeComplianceByResource.
Indicates whether the specified Amazon Web Services resources are compliant. If a resource is noncompliant, this operation returns the number of Config rules that the resource does not comply with.
A resource is compliant if it complies with all the Config rules that evaluate it. It is noncompliant if it does not comply with one or more of these rules.
If Config has no current evaluation results for the resource, it returns INSUFFICIENT_DATA. This result might indicate one of the following conditions about the rules that evaluate the resource:
-
Config has never invoked an evaluation for the rule. To check whether it has, use the
DescribeConfigRuleEvaluationStatusaction to get theLastSuccessfulInvocationTimeandLastFailedInvocationTime. -
The rule's Lambda function is failing to send evaluation results to Config. Verify that the role that you assigned to your configuration recorder includes the
config:PutEvaluationspermission. If the rule is a custom rule, verify that the Lambda execution role includes theconfig:PutEvaluationspermission. -
The rule's Lambda function has returned
NOT_APPLICABLEfor all evaluation results. This can occur if the resources were deleted or removed from the rule's scope.
Implementations§
Source§impl DescribeComplianceByResourceFluentBuilder
impl DescribeComplianceByResourceFluentBuilder
Sourcepub fn as_input(&self) -> &DescribeComplianceByResourceInputBuilder
pub fn as_input(&self) -> &DescribeComplianceByResourceInputBuilder
Access the DescribeComplianceByResource as a reference.
Sourcepub async fn send(
self,
) -> Result<DescribeComplianceByResourceOutput, SdkError<DescribeComplianceByResourceError, HttpResponse>>
pub async fn send( self, ) -> Result<DescribeComplianceByResourceOutput, SdkError<DescribeComplianceByResourceError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DescribeComplianceByResourceOutput, DescribeComplianceByResourceError, Self>
pub fn customize( self, ) -> CustomizableOperation<DescribeComplianceByResourceOutput, DescribeComplianceByResourceError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> DescribeComplianceByResourcePaginator
pub fn into_paginator(self) -> DescribeComplianceByResourcePaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn resource_type(self, input: impl Into<String>) -> Self
pub fn resource_type(self, input: impl Into<String>) -> Self
The types of Amazon Web Services resources for which you want compliance information (for example, AWS::EC2::Instance). For this operation, you can specify that the resource type is an Amazon Web Services account by specifying AWS::::Account.
Sourcepub fn set_resource_type(self, input: Option<String>) -> Self
pub fn set_resource_type(self, input: Option<String>) -> Self
The types of Amazon Web Services resources for which you want compliance information (for example, AWS::EC2::Instance). For this operation, you can specify that the resource type is an Amazon Web Services account by specifying AWS::::Account.
Sourcepub fn get_resource_type(&self) -> &Option<String>
pub fn get_resource_type(&self) -> &Option<String>
The types of Amazon Web Services resources for which you want compliance information (for example, AWS::EC2::Instance). For this operation, you can specify that the resource type is an Amazon Web Services account by specifying AWS::::Account.
Sourcepub fn resource_id(self, input: impl Into<String>) -> Self
pub fn resource_id(self, input: impl Into<String>) -> Self
The ID of the Amazon Web Services resource for which you want compliance information. You can specify only one resource ID. If you specify a resource ID, you must also specify a type for ResourceType.
Sourcepub fn set_resource_id(self, input: Option<String>) -> Self
pub fn set_resource_id(self, input: Option<String>) -> Self
The ID of the Amazon Web Services resource for which you want compliance information. You can specify only one resource ID. If you specify a resource ID, you must also specify a type for ResourceType.
Sourcepub fn get_resource_id(&self) -> &Option<String>
pub fn get_resource_id(&self) -> &Option<String>
The ID of the Amazon Web Services resource for which you want compliance information. You can specify only one resource ID. If you specify a resource ID, you must also specify a type for ResourceType.
Sourcepub fn compliance_types(self, input: ComplianceType) -> Self
pub fn compliance_types(self, input: ComplianceType) -> Self
Appends an item to ComplianceTypes.
To override the contents of this collection use set_compliance_types.
Filters the results by compliance.
Sourcepub fn set_compliance_types(self, input: Option<Vec<ComplianceType>>) -> Self
pub fn set_compliance_types(self, input: Option<Vec<ComplianceType>>) -> Self
Filters the results by compliance.
Sourcepub fn get_compliance_types(&self) -> &Option<Vec<ComplianceType>>
pub fn get_compliance_types(&self) -> &Option<Vec<ComplianceType>>
Filters the results by compliance.
Sourcepub fn limit(self, input: i32) -> Self
pub fn limit(self, input: i32) -> Self
The maximum number of evaluation results returned on each page. The default is 10. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn set_limit(self, input: Option<i32>) -> Self
pub fn set_limit(self, input: Option<i32>) -> Self
The maximum number of evaluation results returned on each page. The default is 10. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn get_limit(&self) -> &Option<i32>
pub fn get_limit(&self) -> &Option<i32>
The maximum number of evaluation results returned on each page. The default is 10. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Trait Implementations§
Source§impl Clone for DescribeComplianceByResourceFluentBuilder
impl Clone for DescribeComplianceByResourceFluentBuilder
Source§fn clone(&self) -> DescribeComplianceByResourceFluentBuilder
fn clone(&self) -> DescribeComplianceByResourceFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DescribeComplianceByResourceFluentBuilder
impl !RefUnwindSafe for DescribeComplianceByResourceFluentBuilder
impl Send for DescribeComplianceByResourceFluentBuilder
impl Sync for DescribeComplianceByResourceFluentBuilder
impl Unpin for DescribeComplianceByResourceFluentBuilder
impl !UnwindSafe for DescribeComplianceByResourceFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);