pub struct GetResourceConfigHistoryFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetResourceConfigHistory.
For accurate reporting on the compliance status, you must record the AWS::Config::ResourceCompliance resource type. For more information, see Selecting Which Resources Config Records.
Returns a list of ConfigurationItems for the specified resource. The list contains details about each state of the resource during the specified time interval. If you specified a retention period to retain your ConfigurationItems between a minimum of 30 days and a maximum of 7 years (2557 days), Config returns the ConfigurationItems for the specified retention period.
The response is paginated. By default, Config returns a limit of 10 configuration items per page. You can customize this number with the limit parameter. The response includes a nextToken string. To get the next page of results, run the request again and specify the string for the nextToken parameter.
Each call to the API is limited to span a duration of seven days. It is likely that the number of records returned is smaller than the specified limit. In such cases, you can make another call, using the nextToken.
Implementations§
Source§impl GetResourceConfigHistoryFluentBuilder
impl GetResourceConfigHistoryFluentBuilder
Sourcepub fn as_input(&self) -> &GetResourceConfigHistoryInputBuilder
pub fn as_input(&self) -> &GetResourceConfigHistoryInputBuilder
Access the GetResourceConfigHistory as a reference.
Sourcepub async fn send(
self,
) -> Result<GetResourceConfigHistoryOutput, SdkError<GetResourceConfigHistoryError, HttpResponse>>
pub async fn send( self, ) -> Result<GetResourceConfigHistoryOutput, SdkError<GetResourceConfigHistoryError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetResourceConfigHistoryOutput, GetResourceConfigHistoryError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetResourceConfigHistoryOutput, GetResourceConfigHistoryError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> GetResourceConfigHistoryPaginator
pub fn into_paginator(self) -> GetResourceConfigHistoryPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn resource_type(self, input: ResourceType) -> Self
pub fn resource_type(self, input: ResourceType) -> Self
The resource type.
Sourcepub fn set_resource_type(self, input: Option<ResourceType>) -> Self
pub fn set_resource_type(self, input: Option<ResourceType>) -> Self
The resource type.
Sourcepub fn get_resource_type(&self) -> &Option<ResourceType>
pub fn get_resource_type(&self) -> &Option<ResourceType>
The resource type.
Sourcepub fn resource_id(self, input: impl Into<String>) -> Self
pub fn resource_id(self, input: impl Into<String>) -> Self
The ID of the resource (for example., sg-xxxxxx).
Sourcepub fn set_resource_id(self, input: Option<String>) -> Self
pub fn set_resource_id(self, input: Option<String>) -> Self
The ID of the resource (for example., sg-xxxxxx).
Sourcepub fn get_resource_id(&self) -> &Option<String>
pub fn get_resource_id(&self) -> &Option<String>
The ID of the resource (for example., sg-xxxxxx).
Sourcepub fn later_time(self, input: DateTime) -> Self
pub fn later_time(self, input: DateTime) -> Self
The chronologically latest time in the time range for which the history requested. If not specified, current time is taken.
Sourcepub fn set_later_time(self, input: Option<DateTime>) -> Self
pub fn set_later_time(self, input: Option<DateTime>) -> Self
The chronologically latest time in the time range for which the history requested. If not specified, current time is taken.
Sourcepub fn get_later_time(&self) -> &Option<DateTime>
pub fn get_later_time(&self) -> &Option<DateTime>
The chronologically latest time in the time range for which the history requested. If not specified, current time is taken.
Sourcepub fn earlier_time(self, input: DateTime) -> Self
pub fn earlier_time(self, input: DateTime) -> Self
The chronologically earliest time in the time range for which the history requested. If not specified, the action returns paginated results that contain configuration items that start when the first configuration item was recorded.
Sourcepub fn set_earlier_time(self, input: Option<DateTime>) -> Self
pub fn set_earlier_time(self, input: Option<DateTime>) -> Self
The chronologically earliest time in the time range for which the history requested. If not specified, the action returns paginated results that contain configuration items that start when the first configuration item was recorded.
Sourcepub fn get_earlier_time(&self) -> &Option<DateTime>
pub fn get_earlier_time(&self) -> &Option<DateTime>
The chronologically earliest time in the time range for which the history requested. If not specified, the action returns paginated results that contain configuration items that start when the first configuration item was recorded.
Sourcepub fn chronological_order(self, input: ChronologicalOrder) -> Self
pub fn chronological_order(self, input: ChronologicalOrder) -> Self
The chronological order for configuration items listed. By default, the results are listed in reverse chronological order.
Sourcepub fn set_chronological_order(self, input: Option<ChronologicalOrder>) -> Self
pub fn set_chronological_order(self, input: Option<ChronologicalOrder>) -> Self
The chronological order for configuration items listed. By default, the results are listed in reverse chronological order.
Sourcepub fn get_chronological_order(&self) -> &Option<ChronologicalOrder>
pub fn get_chronological_order(&self) -> &Option<ChronologicalOrder>
The chronological order for configuration items listed. By default, the results are listed in reverse chronological order.
Sourcepub fn limit(self, input: i32) -> Self
pub fn limit(self, input: i32) -> Self
The maximum number of configuration items returned on each page. The default is 10. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn set_limit(self, input: Option<i32>) -> Self
pub fn set_limit(self, input: Option<i32>) -> Self
The maximum number of configuration items returned on each page. The default is 10. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn get_limit(&self) -> &Option<i32>
pub fn get_limit(&self) -> &Option<i32>
The maximum number of configuration items returned on each page. The default is 10. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Trait Implementations§
Source§impl Clone for GetResourceConfigHistoryFluentBuilder
impl Clone for GetResourceConfigHistoryFluentBuilder
Source§fn clone(&self) -> GetResourceConfigHistoryFluentBuilder
fn clone(&self) -> GetResourceConfigHistoryFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetResourceConfigHistoryFluentBuilder
impl !RefUnwindSafe for GetResourceConfigHistoryFluentBuilder
impl Send for GetResourceConfigHistoryFluentBuilder
impl Sync for GetResourceConfigHistoryFluentBuilder
impl Unpin for GetResourceConfigHistoryFluentBuilder
impl !UnwindSafe for GetResourceConfigHistoryFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);