pub struct ListDiscoveredResourcesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ListDiscoveredResources.
Accepts a resource type and returns a list of resource identifiers for the resources of that type. A resource identifier includes the resource type, ID, and (if available) the custom resource name. The results consist of resources that Config has discovered, including those that Config is not currently recording. You can narrow the results to include only resources that have specific resource IDs or a resource name.
You can specify either resource IDs or a resource name, but not both, in the same request.
The response is paginated. By default, Config lists 100 resource identifiers on each page. You can customize this number with the limit parameter. The response includes a nextToken string. To get the next page of results, run the request again and specify the string for the nextToken parameter.
Implementations§
Source§impl ListDiscoveredResourcesFluentBuilder
impl ListDiscoveredResourcesFluentBuilder
Sourcepub fn as_input(&self) -> &ListDiscoveredResourcesInputBuilder
pub fn as_input(&self) -> &ListDiscoveredResourcesInputBuilder
Access the ListDiscoveredResources as a reference.
Sourcepub async fn send(
self,
) -> Result<ListDiscoveredResourcesOutput, SdkError<ListDiscoveredResourcesError, HttpResponse>>
pub async fn send( self, ) -> Result<ListDiscoveredResourcesOutput, SdkError<ListDiscoveredResourcesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListDiscoveredResourcesOutput, ListDiscoveredResourcesError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListDiscoveredResourcesOutput, ListDiscoveredResourcesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> ListDiscoveredResourcesPaginator
pub fn into_paginator(self) -> ListDiscoveredResourcesPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn resource_type(self, input: ResourceType) -> Self
pub fn resource_type(self, input: ResourceType) -> Self
The type of resources that you want Config to list in the response.
Sourcepub fn set_resource_type(self, input: Option<ResourceType>) -> Self
pub fn set_resource_type(self, input: Option<ResourceType>) -> Self
The type of resources that you want Config to list in the response.
Sourcepub fn get_resource_type(&self) -> &Option<ResourceType>
pub fn get_resource_type(&self) -> &Option<ResourceType>
The type of resources that you want Config to list in the response.
Sourcepub fn resource_ids(self, input: impl Into<String>) -> Self
pub fn resource_ids(self, input: impl Into<String>) -> Self
Appends an item to resourceIds.
To override the contents of this collection use set_resource_ids.
The IDs of only those resources that you want Config to list in the response. If you do not specify this parameter, Config lists all resources of the specified type that it has discovered. You can list a minimum of 1 resourceID and a maximum of 20 resourceIds.
Sourcepub fn set_resource_ids(self, input: Option<Vec<String>>) -> Self
pub fn set_resource_ids(self, input: Option<Vec<String>>) -> Self
The IDs of only those resources that you want Config to list in the response. If you do not specify this parameter, Config lists all resources of the specified type that it has discovered. You can list a minimum of 1 resourceID and a maximum of 20 resourceIds.
Sourcepub fn get_resource_ids(&self) -> &Option<Vec<String>>
pub fn get_resource_ids(&self) -> &Option<Vec<String>>
The IDs of only those resources that you want Config to list in the response. If you do not specify this parameter, Config lists all resources of the specified type that it has discovered. You can list a minimum of 1 resourceID and a maximum of 20 resourceIds.
Sourcepub fn resource_name(self, input: impl Into<String>) -> Self
pub fn resource_name(self, input: impl Into<String>) -> Self
The custom name of only those resources that you want Config to list in the response. If you do not specify this parameter, Config lists all resources of the specified type that it has discovered.
Sourcepub fn set_resource_name(self, input: Option<String>) -> Self
pub fn set_resource_name(self, input: Option<String>) -> Self
The custom name of only those resources that you want Config to list in the response. If you do not specify this parameter, Config lists all resources of the specified type that it has discovered.
Sourcepub fn get_resource_name(&self) -> &Option<String>
pub fn get_resource_name(&self) -> &Option<String>
The custom name of only those resources that you want Config to list in the response. If you do not specify this parameter, Config lists all resources of the specified type that it has discovered.
Sourcepub fn limit(self, input: i32) -> Self
pub fn limit(self, input: i32) -> Self
The maximum number of resource identifiers returned on each page. The default is 100. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn set_limit(self, input: Option<i32>) -> Self
pub fn set_limit(self, input: Option<i32>) -> Self
The maximum number of resource identifiers returned on each page. The default is 100. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn get_limit(&self) -> &Option<i32>
pub fn get_limit(&self) -> &Option<i32>
The maximum number of resource identifiers returned on each page. The default is 100. You cannot specify a number greater than 100. If you specify 0, Config uses the default.
Sourcepub fn include_deleted_resources(self, input: bool) -> Self
pub fn include_deleted_resources(self, input: bool) -> Self
Specifies whether Config includes deleted resources in the results. By default, deleted resources are not included.
Sourcepub fn set_include_deleted_resources(self, input: Option<bool>) -> Self
pub fn set_include_deleted_resources(self, input: Option<bool>) -> Self
Specifies whether Config includes deleted resources in the results. By default, deleted resources are not included.
Sourcepub fn get_include_deleted_resources(&self) -> &Option<bool>
pub fn get_include_deleted_resources(&self) -> &Option<bool>
Specifies whether Config includes deleted resources in the results. By default, deleted resources are not included.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The nextToken string returned on a previous page that you use to get the next page of results in a paginated response.
Trait Implementations§
Source§impl Clone for ListDiscoveredResourcesFluentBuilder
impl Clone for ListDiscoveredResourcesFluentBuilder
Source§fn clone(&self) -> ListDiscoveredResourcesFluentBuilder
fn clone(&self) -> ListDiscoveredResourcesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ListDiscoveredResourcesFluentBuilder
impl !RefUnwindSafe for ListDiscoveredResourcesFluentBuilder
impl Send for ListDiscoveredResourcesFluentBuilder
impl Sync for ListDiscoveredResourcesFluentBuilder
impl Unpin for ListDiscoveredResourcesFluentBuilder
impl !UnwindSafe for ListDiscoveredResourcesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);