#[non_exhaustive]pub enum PutConfigRuleError {
InsufficientPermissionsException(InsufficientPermissionsException),
InvalidParameterValueException(InvalidParameterValueException),
MaxNumberOfConfigRulesExceededException(MaxNumberOfConfigRulesExceededException),
NoAvailableConfigurationRecorderException(NoAvailableConfigurationRecorderException),
ResourceInUseException(ResourceInUseException),
Unhandled(Unhandled),
}
Expand description
Error type for the PutConfigRuleError
operation.
Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
InsufficientPermissionsException(InsufficientPermissionsException)
Indicates one of the following errors:
-
For PutConfigRule, the rule cannot be created because the IAM role assigned to Config lacks permissions to perform the config:Put* action.
-
For PutConfigRule, the Lambda function cannot be invoked. Check the function ARN, and check the function's permissions.
-
For PutOrganizationConfigRule, organization Config rule cannot be created because you do not have permissions to call IAM
GetRole
action or create a service-linked role. -
For PutConformancePack and PutOrganizationConformancePack, a conformance pack cannot be created because you do not have the following permissions:
-
You do not have permission to call IAM
GetRole
action or create a service-linked role. -
You do not have permission to read Amazon S3 bucket or call SSM:GetDocument.
-
-
For PutServiceLinkedConfigurationRecorder, a service-linked configuration recorder cannot be created because you do not have the following permissions: IAM
CreateServiceLinkedRole
.
InvalidParameterValueException(InvalidParameterValueException)
One or more of the specified parameters are not valid. Verify that your parameters are valid and try again.
MaxNumberOfConfigRulesExceededException(MaxNumberOfConfigRulesExceededException)
Failed to add the Config rule because the account already contains the maximum number of 1000 rules. Consider deleting any deactivated rules before you add new rules.
NoAvailableConfigurationRecorderException(NoAvailableConfigurationRecorderException)
There are no customer managed configuration recorders available to record your resources. Use the PutConfigurationRecorder operation to create the customer managed configuration recorder.
ResourceInUseException(ResourceInUseException)
You see this exception in the following cases:
-
For DeleteConfigRule, Config is deleting this rule. Try your request again later.
-
For DeleteConfigRule, the rule is deleting your evaluation results. Try your request again later.
-
For DeleteConfigRule, a remediation action is associated with the rule and Config cannot delete this rule. Delete the remediation action associated with the rule before deleting the rule and try your request again later.
-
For PutConfigOrganizationRule, organization Config rule deletion is in progress. Try your request again later.
-
For DeleteOrganizationConfigRule, organization Config rule creation is in progress. Try your request again later.
-
For PutConformancePack and PutOrganizationConformancePack, a conformance pack creation, update, and deletion is in progress. Try your request again later.
-
For DeleteConformancePack, a conformance pack creation, update, and deletion is in progress. Try your request again later.
Unhandled(Unhandled)
Unhandled
directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code()
:
err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ }
See ProvideErrorMetadata
for what information is available for the error.An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
Implementations§
Source§impl PutConfigRuleError
impl PutConfigRuleError
Sourcepub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
Creates the PutConfigRuleError::Unhandled
variant from any error type.
Sourcepub fn generic(err: ErrorMetadata) -> Self
pub fn generic(err: ErrorMetadata) -> Self
Creates the PutConfigRuleError::Unhandled
variant from an ErrorMetadata
.
Sourcepub fn meta(&self) -> &ErrorMetadata
pub fn meta(&self) -> &ErrorMetadata
Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
Sourcepub fn is_insufficient_permissions_exception(&self) -> bool
pub fn is_insufficient_permissions_exception(&self) -> bool
Returns true
if the error kind is PutConfigRuleError::InsufficientPermissionsException
.
Sourcepub fn is_invalid_parameter_value_exception(&self) -> bool
pub fn is_invalid_parameter_value_exception(&self) -> bool
Returns true
if the error kind is PutConfigRuleError::InvalidParameterValueException
.
Sourcepub fn is_max_number_of_config_rules_exceeded_exception(&self) -> bool
pub fn is_max_number_of_config_rules_exceeded_exception(&self) -> bool
Returns true
if the error kind is PutConfigRuleError::MaxNumberOfConfigRulesExceededException
.
Sourcepub fn is_no_available_configuration_recorder_exception(&self) -> bool
pub fn is_no_available_configuration_recorder_exception(&self) -> bool
Returns true
if the error kind is PutConfigRuleError::NoAvailableConfigurationRecorderException
.
Sourcepub fn is_resource_in_use_exception(&self) -> bool
pub fn is_resource_in_use_exception(&self) -> bool
Returns true
if the error kind is PutConfigRuleError::ResourceInUseException
.
Trait Implementations§
Source§impl CreateUnhandledError for PutConfigRuleError
impl CreateUnhandledError for PutConfigRuleError
Source§fn create_unhandled_error(
source: Box<dyn Error + Send + Sync + 'static>,
meta: Option<ErrorMetadata>,
) -> Self
fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata>, ) -> Self
source
and error metadata.Source§impl Debug for PutConfigRuleError
impl Debug for PutConfigRuleError
Source§impl Display for PutConfigRuleError
impl Display for PutConfigRuleError
Source§impl Error for PutConfigRuleError
impl Error for PutConfigRuleError
Source§fn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
1.0.0 · Source§fn description(&self) -> &str
fn description(&self) -> &str
Source§impl From<PutConfigRuleError> for Error
impl From<PutConfigRuleError> for Error
Source§fn from(err: PutConfigRuleError) -> Self
fn from(err: PutConfigRuleError) -> Self
Source§impl ProvideErrorMetadata for PutConfigRuleError
impl ProvideErrorMetadata for PutConfigRuleError
Source§fn meta(&self) -> &ErrorMetadata
fn meta(&self) -> &ErrorMetadata
Source§impl RequestId for PutConfigRuleError
impl RequestId for PutConfigRuleError
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.Auto Trait Implementations§
impl Freeze for PutConfigRuleError
impl !RefUnwindSafe for PutConfigRuleError
impl Send for PutConfigRuleError
impl Sync for PutConfigRuleError
impl Unpin for PutConfigRuleError
impl !UnwindSafe for PutConfigRuleError
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.bright_black());
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.bright_green());
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.bright_yellow());
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.bright_magenta());
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.bright_white());
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.on_bright_black());
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.on_bright_green());
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.on_bright_yellow());
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlue
.
§Example
println!("{}", value.on_bright_blue());
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.on_bright_magenta());
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightCyan
.
§Example
println!("{}", value.on_bright_cyan());
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.on_bright_white());
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::Underline
.
§Example
println!("{}", value.underline());
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::RapidBlink
.
§Example
println!("{}", value.rapid_blink());
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);