pub struct StartConfigRulesEvaluationFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to StartConfigRulesEvaluation
.
Runs an on-demand evaluation for the specified Config rules against the last known configuration state of the resources. Use StartConfigRulesEvaluation
when you want to test that a rule you updated is working as expected. StartConfigRulesEvaluation
does not re-record the latest configuration state for your resources. It re-runs an evaluation against the last known state of your resources.
You can specify up to 25 Config rules per request.
An existing StartConfigRulesEvaluation
call for the specified rules must complete before you can call the API again. If you chose to have Config stream to an Amazon SNS topic, you will receive a ConfigRuleEvaluationStarted
notification when the evaluation starts.
You don't need to call the StartConfigRulesEvaluation
API to run an evaluation for a new rule. When you create a rule, Config evaluates your resources against the rule automatically.
The StartConfigRulesEvaluation
API is useful if you want to run on-demand evaluations, such as the following example:
-
You have a custom rule that evaluates your IAM resources every 24 hours.
-
You update your Lambda function to add additional conditions to your rule.
-
Instead of waiting for the next periodic evaluation, you call the
StartConfigRulesEvaluation
API. -
Config invokes your Lambda function and evaluates your IAM resources.
-
Your custom rule will still run periodic evaluations every 24 hours.
Implementations§
Source§impl StartConfigRulesEvaluationFluentBuilder
impl StartConfigRulesEvaluationFluentBuilder
Sourcepub fn as_input(&self) -> &StartConfigRulesEvaluationInputBuilder
pub fn as_input(&self) -> &StartConfigRulesEvaluationInputBuilder
Access the StartConfigRulesEvaluation as a reference.
Sourcepub async fn send(
self,
) -> Result<StartConfigRulesEvaluationOutput, SdkError<StartConfigRulesEvaluationError, HttpResponse>>
pub async fn send( self, ) -> Result<StartConfigRulesEvaluationOutput, SdkError<StartConfigRulesEvaluationError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<StartConfigRulesEvaluationOutput, StartConfigRulesEvaluationError, Self>
pub fn customize( self, ) -> CustomizableOperation<StartConfigRulesEvaluationOutput, StartConfigRulesEvaluationError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn config_rule_names(self, input: impl Into<String>) -> Self
pub fn config_rule_names(self, input: impl Into<String>) -> Self
Appends an item to ConfigRuleNames
.
To override the contents of this collection use set_config_rule_names
.
The list of names of Config rules that you want to run evaluations for.
Sourcepub fn set_config_rule_names(self, input: Option<Vec<String>>) -> Self
pub fn set_config_rule_names(self, input: Option<Vec<String>>) -> Self
The list of names of Config rules that you want to run evaluations for.
Sourcepub fn get_config_rule_names(&self) -> &Option<Vec<String>>
pub fn get_config_rule_names(&self) -> &Option<Vec<String>>
The list of names of Config rules that you want to run evaluations for.
Trait Implementations§
Source§impl Clone for StartConfigRulesEvaluationFluentBuilder
impl Clone for StartConfigRulesEvaluationFluentBuilder
Source§fn clone(&self) -> StartConfigRulesEvaluationFluentBuilder
fn clone(&self) -> StartConfigRulesEvaluationFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for StartConfigRulesEvaluationFluentBuilder
impl !RefUnwindSafe for StartConfigRulesEvaluationFluentBuilder
impl Send for StartConfigRulesEvaluationFluentBuilder
impl Sync for StartConfigRulesEvaluationFluentBuilder
impl Unpin for StartConfigRulesEvaluationFluentBuilder
impl !UnwindSafe for StartConfigRulesEvaluationFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.bright_black());
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.bright_green());
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.bright_yellow());
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.bright_magenta());
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.bright_white());
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.on_bright_black());
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.on_bright_green());
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.on_bright_yellow());
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlue
.
§Example
println!("{}", value.on_bright_blue());
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.on_bright_magenta());
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightCyan
.
§Example
println!("{}", value.on_bright_cyan());
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.on_bright_white());
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::Underline
.
§Example
println!("{}", value.underline());
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::RapidBlink
.
§Example
println!("{}", value.rapid_blink());
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);