pub struct CreateInstanceFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateInstance.
This API is in preview release for Amazon Connect and is subject to change.
Initiates an Amazon Connect instance with all the supported channels enabled. It does not attach any storage, such as Amazon Simple Storage Service (Amazon S3) or Amazon Kinesis. It also does not allow for any configurations on features, such as Contact Lens for Amazon Connect.
For more information, see Create an Amazon Connect instance in the Amazon Connect Administrator Guide.
Amazon Connect enforces a limit on the total number of instances that you can create or delete in 30 days. If you exceed this limit, you will get an error message indicating there has been an excessive number of attempts at creating or deleting instances. You must wait 30 days before you can restart creating and deleting instances in your account.
Implementations§
Source§impl CreateInstanceFluentBuilder
impl CreateInstanceFluentBuilder
Sourcepub fn as_input(&self) -> &CreateInstanceInputBuilder
pub fn as_input(&self) -> &CreateInstanceInputBuilder
Access the CreateInstance as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateInstanceOutput, SdkError<CreateInstanceError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateInstanceOutput, SdkError<CreateInstanceError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateInstanceOutput, CreateInstanceError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateInstanceOutput, CreateInstanceError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
The idempotency token.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
The idempotency token.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
The idempotency token.
Sourcepub fn identity_management_type(self, input: DirectoryType) -> Self
pub fn identity_management_type(self, input: DirectoryType) -> Self
The type of identity management for your Amazon Connect users.
Sourcepub fn set_identity_management_type(self, input: Option<DirectoryType>) -> Self
pub fn set_identity_management_type(self, input: Option<DirectoryType>) -> Self
The type of identity management for your Amazon Connect users.
Sourcepub fn get_identity_management_type(&self) -> &Option<DirectoryType>
pub fn get_identity_management_type(&self) -> &Option<DirectoryType>
The type of identity management for your Amazon Connect users.
Sourcepub fn instance_alias(self, input: impl Into<String>) -> Self
pub fn instance_alias(self, input: impl Into<String>) -> Self
The name for your instance.
Sourcepub fn set_instance_alias(self, input: Option<String>) -> Self
pub fn set_instance_alias(self, input: Option<String>) -> Self
The name for your instance.
Sourcepub fn get_instance_alias(&self) -> &Option<String>
pub fn get_instance_alias(&self) -> &Option<String>
The name for your instance.
Sourcepub fn directory_id(self, input: impl Into<String>) -> Self
pub fn directory_id(self, input: impl Into<String>) -> Self
The identifier for the directory.
Sourcepub fn set_directory_id(self, input: Option<String>) -> Self
pub fn set_directory_id(self, input: Option<String>) -> Self
The identifier for the directory.
Sourcepub fn get_directory_id(&self) -> &Option<String>
pub fn get_directory_id(&self) -> &Option<String>
The identifier for the directory.
Sourcepub fn inbound_calls_enabled(self, input: bool) -> Self
pub fn inbound_calls_enabled(self, input: bool) -> Self
Your contact center handles incoming contacts.
Sourcepub fn set_inbound_calls_enabled(self, input: Option<bool>) -> Self
pub fn set_inbound_calls_enabled(self, input: Option<bool>) -> Self
Your contact center handles incoming contacts.
Sourcepub fn get_inbound_calls_enabled(&self) -> &Option<bool>
pub fn get_inbound_calls_enabled(&self) -> &Option<bool>
Your contact center handles incoming contacts.
Sourcepub fn outbound_calls_enabled(self, input: bool) -> Self
pub fn outbound_calls_enabled(self, input: bool) -> Self
Your contact center allows outbound calls.
Sourcepub fn set_outbound_calls_enabled(self, input: Option<bool>) -> Self
pub fn set_outbound_calls_enabled(self, input: Option<bool>) -> Self
Your contact center allows outbound calls.
Sourcepub fn get_outbound_calls_enabled(&self) -> &Option<bool>
pub fn get_outbound_calls_enabled(&self) -> &Option<bool>
Your contact center allows outbound calls.
Adds a key-value pair to Tags.
To override the contents of this collection use set_tags.
The tags used to organize, track, or control access for this resource. For example, { "tags": {"key1":"value1", "key2":"value2"} }.
The tags used to organize, track, or control access for this resource. For example, { "tags": {"key1":"value1", "key2":"value2"} }.
The tags used to organize, track, or control access for this resource. For example, { "tags": {"key1":"value1", "key2":"value2"} }.
Trait Implementations§
Source§impl Clone for CreateInstanceFluentBuilder
impl Clone for CreateInstanceFluentBuilder
Source§fn clone(&self) -> CreateInstanceFluentBuilder
fn clone(&self) -> CreateInstanceFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateInstanceFluentBuilder
impl !RefUnwindSafe for CreateInstanceFluentBuilder
impl Send for CreateInstanceFluentBuilder
impl Sync for CreateInstanceFluentBuilder
impl Unpin for CreateInstanceFluentBuilder
impl !UnwindSafe for CreateInstanceFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);