aws_sdk_connect::operation::get_metric_data::builders

Struct GetMetricDataInputBuilder

Source 
#[non_exhaustive]
pub struct GetMetricDataInputBuilder { /* private fields */ }
Expand description

A builder for GetMetricDataInput.

Implementations§

Source§

impl GetMetricDataInputBuilder

Source

pub fn instance_id(self, input: impl Into<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

This field is required.
Source

pub fn set_instance_id(self, input: Option<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

Source

pub fn get_instance_id(&self) -> &Option<String>

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

Source

pub fn start_time(self, input: DateTime) -> Self

The timestamp, in UNIX Epoch time format, at which to start the reporting interval for the retrieval of historical metrics data. The time must be specified using a multiple of 5 minutes, such as 10:05, 10:10, 10:15.

The start time cannot be earlier than 24 hours before the time of the request. Historical metrics are available only for 24 hours.

This field is required.
Source

pub fn set_start_time(self, input: Option<DateTime>) -> Self

The timestamp, in UNIX Epoch time format, at which to start the reporting interval for the retrieval of historical metrics data. The time must be specified using a multiple of 5 minutes, such as 10:05, 10:10, 10:15.

The start time cannot be earlier than 24 hours before the time of the request. Historical metrics are available only for 24 hours.

Source

pub fn get_start_time(&self) -> &Option<DateTime>

The timestamp, in UNIX Epoch time format, at which to start the reporting interval for the retrieval of historical metrics data. The time must be specified using a multiple of 5 minutes, such as 10:05, 10:10, 10:15.

The start time cannot be earlier than 24 hours before the time of the request. Historical metrics are available only for 24 hours.

Source

pub fn end_time(self, input: DateTime) -> Self

The timestamp, in UNIX Epoch time format, at which to end the reporting interval for the retrieval of historical metrics data. The time must be specified using an interval of 5 minutes, such as 11:00, 11:05, 11:10, and must be later than the start time timestamp.

The time range between the start and end time must be less than 24 hours.

This field is required.
Source

pub fn set_end_time(self, input: Option<DateTime>) -> Self

The timestamp, in UNIX Epoch time format, at which to end the reporting interval for the retrieval of historical metrics data. The time must be specified using an interval of 5 minutes, such as 11:00, 11:05, 11:10, and must be later than the start time timestamp.

The time range between the start and end time must be less than 24 hours.

Source

pub fn get_end_time(&self) -> &Option<DateTime>

The timestamp, in UNIX Epoch time format, at which to end the reporting interval for the retrieval of historical metrics data. The time must be specified using an interval of 5 minutes, such as 11:00, 11:05, 11:10, and must be later than the start time timestamp.

The time range between the start and end time must be less than 24 hours.

Source

pub fn filters(self, input: Filters) -> Self

The queues, up to 100, or channels, to use to filter the metrics returned. Metric data is retrieved only for the resources associated with the queues or channels included in the filter. You can include both queue IDs and queue ARNs in the same request. VOICE, CHAT, and TASK channels are supported.

RoutingStepExpression is not a valid filter for GetMetricData and we recommend switching to GetMetricDataV2 for more up-to-date features.

To filter by Queues, enter the queue ID/ARN, not the name of the queue.

 This field is required.
Source

pub fn set_filters(self, input: Option<Filters>) -> Self

The queues, up to 100, or channels, to use to filter the metrics returned. Metric data is retrieved only for the resources associated with the queues or channels included in the filter. You can include both queue IDs and queue ARNs in the same request. VOICE, CHAT, and TASK channels are supported.

RoutingStepExpression is not a valid filter for GetMetricData and we recommend switching to GetMetricDataV2 for more up-to-date features.

To filter by Queues, enter the queue ID/ARN, not the name of the queue.

Source

pub fn get_filters(&self) -> &Option<Filters>

The queues, up to 100, or channels, to use to filter the metrics returned. Metric data is retrieved only for the resources associated with the queues or channels included in the filter. You can include both queue IDs and queue ARNs in the same request. VOICE, CHAT, and TASK channels are supported.

RoutingStepExpression is not a valid filter for GetMetricData and we recommend switching to GetMetricDataV2 for more up-to-date features.

To filter by Queues, enter the queue ID/ARN, not the name of the queue.

Source

pub fn groupings(self, input: Grouping) -> Self

Appends an item to groupings.

To override the contents of this collection use set_groupings.

The grouping applied to the metrics returned. For example, when results are grouped by queue, the metrics returned are grouped by queue. The values returned apply to the metrics for each queue rather than aggregated for all queues.

If no grouping is specified, a summary of metrics for all queues is returned.

RoutingStepExpression is not a valid filter for GetMetricData and we recommend switching to GetMetricDataV2 for more up-to-date features.

Source

pub fn set_groupings(self, input: Option<Vec<Grouping>>) -> Self

The grouping applied to the metrics returned. For example, when results are grouped by queue, the metrics returned are grouped by queue. The values returned apply to the metrics for each queue rather than aggregated for all queues.

If no grouping is specified, a summary of metrics for all queues is returned.

RoutingStepExpression is not a valid filter for GetMetricData and we recommend switching to GetMetricDataV2 for more up-to-date features.

Source

pub fn get_groupings(&self) -> &Option<Vec<Grouping>>

The grouping applied to the metrics returned. For example, when results are grouped by queue, the metrics returned are grouped by queue. The values returned apply to the metrics for each queue rather than aggregated for all queues.

If no grouping is specified, a summary of metrics for all queues is returned.

RoutingStepExpression is not a valid filter for GetMetricData and we recommend switching to GetMetricDataV2 for more up-to-date features.

Source

pub fn historical_metrics(self, input: HistoricalMetric) -> Self

Appends an item to historical_metrics.

To override the contents of this collection use set_historical_metrics.

The metrics to retrieve. Specify the name, unit, and statistic for each metric. The following historical metrics are available. For a description of each metric, see Historical Metrics Definitions in the Amazon Connect Administrator Guide.

This API does not support a contacts incoming metric (there's no CONTACTS_INCOMING metric missing from the documented list).
ABANDON_TIME

Unit: SECONDS

Statistic: AVG

AFTER_CONTACT_WORK_TIME

Unit: SECONDS

Statistic: AVG

API_CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CALLBACK_CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CONTACTS_ABANDONED

Unit: COUNT

Statistic: SUM

CONTACTS_AGENT_HUNG_UP_FIRST

Unit: COUNT

Statistic: SUM

CONTACTS_CONSULTED

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED_INCOMING

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED_OUTBOUND

Unit: COUNT

Statistic: SUM

CONTACTS_HOLD_ABANDONS

Unit: COUNT

Statistic: SUM

CONTACTS_MISSED

Unit: COUNT

Statistic: SUM

CONTACTS_QUEUED

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_IN

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_IN_FROM_QUEUE

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_OUT

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_OUT_FROM_QUEUE

Unit: COUNT

Statistic: SUM

HANDLE_TIME

Unit: SECONDS

Statistic: AVG

HOLD_TIME

Unit: SECONDS

Statistic: AVG

INTERACTION_AND_HOLD_TIME

Unit: SECONDS

Statistic: AVG

INTERACTION_TIME

Unit: SECONDS

Statistic: AVG

OCCUPANCY

Unit: PERCENT

Statistic: AVG

QUEUE_ANSWER_TIME

Unit: SECONDS

Statistic: AVG

QUEUED_TIME

Unit: SECONDS

Statistic: MAX

SERVICE_LEVEL

You can include up to 20 SERVICE_LEVEL metrics in a request.

Unit: PERCENT

Statistic: AVG

Threshold: For ThresholdValue, enter any whole number from 1 to 604800 (inclusive), in seconds. For Comparison, you must enter LT (for "Less than").

Source

pub fn set_historical_metrics( self, input: Option<Vec<HistoricalMetric>>, ) -> Self

The metrics to retrieve. Specify the name, unit, and statistic for each metric. The following historical metrics are available. For a description of each metric, see Historical Metrics Definitions in the Amazon Connect Administrator Guide.

This API does not support a contacts incoming metric (there's no CONTACTS_INCOMING metric missing from the documented list).
ABANDON_TIME

Unit: SECONDS

Statistic: AVG

AFTER_CONTACT_WORK_TIME

Unit: SECONDS

Statistic: AVG

API_CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CALLBACK_CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CONTACTS_ABANDONED

Unit: COUNT

Statistic: SUM

CONTACTS_AGENT_HUNG_UP_FIRST

Unit: COUNT

Statistic: SUM

CONTACTS_CONSULTED

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED_INCOMING

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED_OUTBOUND

Unit: COUNT

Statistic: SUM

CONTACTS_HOLD_ABANDONS

Unit: COUNT

Statistic: SUM

CONTACTS_MISSED

Unit: COUNT

Statistic: SUM

CONTACTS_QUEUED

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_IN

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_IN_FROM_QUEUE

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_OUT

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_OUT_FROM_QUEUE

Unit: COUNT

Statistic: SUM

HANDLE_TIME

Unit: SECONDS

Statistic: AVG

HOLD_TIME

Unit: SECONDS

Statistic: AVG

INTERACTION_AND_HOLD_TIME

Unit: SECONDS

Statistic: AVG

INTERACTION_TIME

Unit: SECONDS

Statistic: AVG

OCCUPANCY

Unit: PERCENT

Statistic: AVG

QUEUE_ANSWER_TIME

Unit: SECONDS

Statistic: AVG

QUEUED_TIME

Unit: SECONDS

Statistic: MAX

SERVICE_LEVEL

You can include up to 20 SERVICE_LEVEL metrics in a request.

Unit: PERCENT

Statistic: AVG

Threshold: For ThresholdValue, enter any whole number from 1 to 604800 (inclusive), in seconds. For Comparison, you must enter LT (for "Less than").

Source

pub fn get_historical_metrics(&self) -> &Option<Vec<HistoricalMetric>>

The metrics to retrieve. Specify the name, unit, and statistic for each metric. The following historical metrics are available. For a description of each metric, see Historical Metrics Definitions in the Amazon Connect Administrator Guide.

This API does not support a contacts incoming metric (there's no CONTACTS_INCOMING metric missing from the documented list).
ABANDON_TIME

Unit: SECONDS

Statistic: AVG

AFTER_CONTACT_WORK_TIME

Unit: SECONDS

Statistic: AVG

API_CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CALLBACK_CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CONTACTS_ABANDONED

Unit: COUNT

Statistic: SUM

CONTACTS_AGENT_HUNG_UP_FIRST

Unit: COUNT

Statistic: SUM

CONTACTS_CONSULTED

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED_INCOMING

Unit: COUNT

Statistic: SUM

CONTACTS_HANDLED_OUTBOUND

Unit: COUNT

Statistic: SUM

CONTACTS_HOLD_ABANDONS

Unit: COUNT

Statistic: SUM

CONTACTS_MISSED

Unit: COUNT

Statistic: SUM

CONTACTS_QUEUED

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_IN

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_IN_FROM_QUEUE

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_OUT

Unit: COUNT

Statistic: SUM

CONTACTS_TRANSFERRED_OUT_FROM_QUEUE

Unit: COUNT

Statistic: SUM

HANDLE_TIME

Unit: SECONDS

Statistic: AVG

HOLD_TIME

Unit: SECONDS

Statistic: AVG

INTERACTION_AND_HOLD_TIME

Unit: SECONDS

Statistic: AVG

INTERACTION_TIME

Unit: SECONDS

Statistic: AVG

OCCUPANCY

Unit: PERCENT

Statistic: AVG

QUEUE_ANSWER_TIME

Unit: SECONDS

Statistic: AVG

QUEUED_TIME

Unit: SECONDS

Statistic: MAX

SERVICE_LEVEL

You can include up to 20 SERVICE_LEVEL metrics in a request.

Unit: PERCENT

Statistic: AVG

Threshold: For ThresholdValue, enter any whole number from 1 to 604800 (inclusive), in seconds. For Comparison, you must enter LT (for "Less than").

Source

pub fn next_token(self, input: impl Into<String>) -> Self

The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.

Source

pub fn set_next_token(self, input: Option<String>) -> Self

The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.

Source

pub fn get_next_token(&self) -> &Option<String>

The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.

Source

pub fn max_results(self, input: i32) -> Self

The maximum number of results to return per page.

Source

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of results to return per page.

Source

pub fn get_max_results(&self) -> &Option<i32>

The maximum number of results to return per page.

Source

pub fn build(self) -> Result<GetMetricDataInput, BuildError>

Consumes the builder and constructs a GetMetricDataInput.

Source§

impl GetMetricDataInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<GetMetricDataOutput, SdkError<GetMetricDataError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for GetMetricDataInputBuilder

Source§

fn clone(&self) -> GetMetricDataInputBuilder

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for GetMetricDataInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for GetMetricDataInputBuilder

Source§

fn default() -> GetMetricDataInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for GetMetricDataInputBuilder

Source§

fn eq(&self, other: &GetMetricDataInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for GetMetricDataInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

§Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T