aws_sdk_connect::operation::start_chat_contact::builders

Struct StartChatContactInputBuilder

Source 
#[non_exhaustive]
pub struct StartChatContactInputBuilder { /* private fields */ }
Expand description

A builder for StartChatContactInput.

Implementations§

Source§

impl StartChatContactInputBuilder

Source

pub fn instance_id(self, input: impl Into<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

This field is required.
Source

pub fn set_instance_id(self, input: Option<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

Source

pub fn get_instance_id(&self) -> &Option<String>

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

Source

pub fn contact_flow_id(self, input: impl Into<String>) -> Self

The identifier of the flow for initiating the chat. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

This field is required.
Source

pub fn set_contact_flow_id(self, input: Option<String>) -> Self

The identifier of the flow for initiating the chat. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

Source

pub fn get_contact_flow_id(&self) -> &Option<String>

The identifier of the flow for initiating the chat. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

Source

pub fn attributes(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to attributes.

To override the contents of this collection use set_attributes.

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

Source

pub fn set_attributes(self, input: Option<HashMap<String, String>>) -> Self

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

Source

pub fn get_attributes(&self) -> &Option<HashMap<String, String>>

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

Source

pub fn participant_details(self, input: ParticipantDetails) -> Self

Information identifying the participant.

This field is required.
Source

pub fn set_participant_details(self, input: Option<ParticipantDetails>) -> Self

Information identifying the participant.

Source

pub fn get_participant_details(&self) -> &Option<ParticipantDetails>

Information identifying the participant.

Source

pub fn initial_message(self, input: ChatMessage) -> Self

The initial message to be sent to the newly created chat. If you have a Lex bot in your flow, the initial message is not delivered to the Lex bot.

Source

pub fn set_initial_message(self, input: Option<ChatMessage>) -> Self

The initial message to be sent to the newly created chat. If you have a Lex bot in your flow, the initial message is not delivered to the Lex bot.

Source

pub fn get_initial_message(&self) -> &Option<ChatMessage>

The initial message to be sent to the newly created chat. If you have a Lex bot in your flow, the initial message is not delivered to the Lex bot.

Source

pub fn client_token(self, input: impl Into<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

Source

pub fn set_client_token(self, input: Option<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

Source

pub fn get_client_token(&self) -> &Option<String>

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

Source

pub fn chat_duration_in_minutes(self, input: i32) -> Self

The total duration of the newly started chat session. If not specified, the chat session duration defaults to 25 hour. The minimum configurable time is 60 minutes. The maximum configurable time is 10,080 minutes (7 days).

Source

pub fn set_chat_duration_in_minutes(self, input: Option<i32>) -> Self

The total duration of the newly started chat session. If not specified, the chat session duration defaults to 25 hour. The minimum configurable time is 60 minutes. The maximum configurable time is 10,080 minutes (7 days).

Source

pub fn get_chat_duration_in_minutes(&self) -> &Option<i32>

The total duration of the newly started chat session. If not specified, the chat session duration defaults to 25 hour. The minimum configurable time is 60 minutes. The maximum configurable time is 10,080 minutes (7 days).

Source

pub fn supported_messaging_content_types(self, input: impl Into<String>) -> Self

Appends an item to supported_messaging_content_types.

To override the contents of this collection use set_supported_messaging_content_types.

The supported chat message content types. Supported types are text/plain, text/markdown, application/json, application/vnd.amazonaws.connect.message.interactive, and application/vnd.amazonaws.connect.message.interactive.response.

Content types must always contain text/plain. You can then put any other supported type in the list. For example, all the following lists are valid because they contain text/plain: \[text/plain, text/markdown, application/json\], \[text/markdown, text/plain\], \[text/plain, application/json, application/vnd.amazonaws.connect.message.interactive.response\].

The type application/vnd.amazonaws.connect.message.interactive is required to use the Show view flow block.

Source

pub fn set_supported_messaging_content_types( self, input: Option<Vec<String>>, ) -> Self

The supported chat message content types. Supported types are text/plain, text/markdown, application/json, application/vnd.amazonaws.connect.message.interactive, and application/vnd.amazonaws.connect.message.interactive.response.

Content types must always contain text/plain. You can then put any other supported type in the list. For example, all the following lists are valid because they contain text/plain: \[text/plain, text/markdown, application/json\], \[text/markdown, text/plain\], \[text/plain, application/json, application/vnd.amazonaws.connect.message.interactive.response\].

The type application/vnd.amazonaws.connect.message.interactive is required to use the Show view flow block.

Source

pub fn get_supported_messaging_content_types(&self) -> &Option<Vec<String>>

The supported chat message content types. Supported types are text/plain, text/markdown, application/json, application/vnd.amazonaws.connect.message.interactive, and application/vnd.amazonaws.connect.message.interactive.response.

Content types must always contain text/plain. You can then put any other supported type in the list. For example, all the following lists are valid because they contain text/plain: \[text/plain, text/markdown, application/json\], \[text/markdown, text/plain\], \[text/plain, application/json, application/vnd.amazonaws.connect.message.interactive.response\].

The type application/vnd.amazonaws.connect.message.interactive is required to use the Show view flow block.

Source

pub fn persistent_chat(self, input: PersistentChat) -> Self

Enable persistent chats. For more information about enabling persistent chat, and for example use cases and how to configure for them, see Enable persistent chat.

Source

pub fn set_persistent_chat(self, input: Option<PersistentChat>) -> Self

Enable persistent chats. For more information about enabling persistent chat, and for example use cases and how to configure for them, see Enable persistent chat.

Source

pub fn get_persistent_chat(&self) -> &Option<PersistentChat>

Enable persistent chats. For more information about enabling persistent chat, and for example use cases and how to configure for them, see Enable persistent chat.

Source

pub fn related_contact_id(self, input: impl Into<String>) -> Self

The unique identifier for an Amazon Connect contact. This identifier is related to the chat starting.

You cannot provide data for both RelatedContactId and PersistentChat.

The unique identifier for an Amazon Connect contact. This identifier is related to the chat starting.

You cannot provide data for both RelatedContactId and PersistentChat.

The unique identifier for an Amazon Connect contact. This identifier is related to the chat starting.

You cannot provide data for both RelatedContactId and PersistentChat.

Source

pub fn segment_attributes( self, k: impl Into<String>, v: SegmentAttributeValue, ) -> Self

Adds a key-value pair to segment_attributes.

To override the contents of this collection use set_segment_attributes.

A set of system defined key-value pairs stored on individual contact segments using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to show channel subtype, such as connect:Guide.

The types application/vnd.amazonaws.connect.message.interactive and application/vnd.amazonaws.connect.message.interactive.response must be present in the SupportedMessagingContentTypes field of this API in order to set SegmentAttributes as { "connect:Subtype": {"valueString" : "connect:Guide" }}.

Source

pub fn set_segment_attributes( self, input: Option<HashMap<String, SegmentAttributeValue>>, ) -> Self

A set of system defined key-value pairs stored on individual contact segments using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to show channel subtype, such as connect:Guide.

The types application/vnd.amazonaws.connect.message.interactive and application/vnd.amazonaws.connect.message.interactive.response must be present in the SupportedMessagingContentTypes field of this API in order to set SegmentAttributes as { "connect:Subtype": {"valueString" : "connect:Guide" }}.

Source

pub fn get_segment_attributes( &self, ) -> &Option<HashMap<String, SegmentAttributeValue>>

A set of system defined key-value pairs stored on individual contact segments using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to show channel subtype, such as connect:Guide.

The types application/vnd.amazonaws.connect.message.interactive and application/vnd.amazonaws.connect.message.interactive.response must be present in the SupportedMessagingContentTypes field of this API in order to set SegmentAttributes as { "connect:Subtype": {"valueString" : "connect:Guide" }}.

Source

pub fn customer_id(self, input: impl Into<String>) -> Self

The customer's identification number. For example, the CustomerId may be a customer number from your CRM.

Source

pub fn set_customer_id(self, input: Option<String>) -> Self

The customer's identification number. For example, the CustomerId may be a customer number from your CRM.

Source

pub fn get_customer_id(&self) -> &Option<String>

The customer's identification number. For example, the CustomerId may be a customer number from your CRM.

Source

pub fn build(self) -> Result<StartChatContactInput, BuildError>

Consumes the builder and constructs a StartChatContactInput.

Source§

impl StartChatContactInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<StartChatContactOutput, SdkError<StartChatContactError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for StartChatContactInputBuilder

Source§

fn clone(&self) -> StartChatContactInputBuilder

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for StartChatContactInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for StartChatContactInputBuilder

Source§

fn default() -> StartChatContactInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for StartChatContactInputBuilder

Source§

fn eq(&self, other: &StartChatContactInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for StartChatContactInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

§Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T