aws_sdk_connect::operation::start_task_contact::builders

Struct StartTaskContactInputBuilder

Source
#[non_exhaustive]
pub struct StartTaskContactInputBuilder { /* private fields */ }
Expand description

A builder for StartTaskContactInput.

Implementations§

Source§

impl StartTaskContactInputBuilder

Source

pub fn instance_id(self, input: impl Into<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

This field is required.
Source

pub fn set_instance_id(self, input: Option<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

Source

pub fn get_instance_id(&self) -> &Option<String>

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

Source

pub fn previous_contact_id(self, input: impl Into<String>) -> Self

The identifier of the previous chat, voice, or task contact. Any updates to user-defined attributes to task contacts linked using the same PreviousContactID will affect every contact in the chain. There can be a maximum of 12 linked task contacts in a chain.

Source

pub fn set_previous_contact_id(self, input: Option<String>) -> Self

The identifier of the previous chat, voice, or task contact. Any updates to user-defined attributes to task contacts linked using the same PreviousContactID will affect every contact in the chain. There can be a maximum of 12 linked task contacts in a chain.

Source

pub fn get_previous_contact_id(&self) -> &Option<String>

The identifier of the previous chat, voice, or task contact. Any updates to user-defined attributes to task contacts linked using the same PreviousContactID will affect every contact in the chain. There can be a maximum of 12 linked task contacts in a chain.

Source

pub fn contact_flow_id(self, input: impl Into<String>) -> Self

The identifier of the flow for initiating the tasks. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

Source

pub fn set_contact_flow_id(self, input: Option<String>) -> Self

The identifier of the flow for initiating the tasks. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

Source

pub fn get_contact_flow_id(&self) -> &Option<String>

The identifier of the flow for initiating the tasks. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

Source

pub fn attributes(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to attributes.

To override the contents of this collection use set_attributes.

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes, and can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

Source

pub fn set_attributes(self, input: Option<HashMap<String, String>>) -> Self

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes, and can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

Source

pub fn get_attributes(&self) -> &Option<HashMap<String, String>>

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes, and can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

Source

pub fn name(self, input: impl Into<String>) -> Self

The name of a task that is shown to an agent in the Contact Control Panel (CCP).

This field is required.
Source

pub fn set_name(self, input: Option<String>) -> Self

The name of a task that is shown to an agent in the Contact Control Panel (CCP).

Source

pub fn get_name(&self) -> &Option<String>

The name of a task that is shown to an agent in the Contact Control Panel (CCP).

Source

pub fn references(self, k: impl Into<String>, v: Reference) -> Self

Adds a key-value pair to references.

To override the contents of this collection use set_references.

A formatted URL that is shown to an agent in the Contact Control Panel (CCP). Tasks can have the following reference types at the time of creation: URL | NUMBER | STRING | DATE | EMAIL. ATTACHMENT is not a supported reference type during task creation.

Source

pub fn set_references(self, input: Option<HashMap<String, Reference>>) -> Self

A formatted URL that is shown to an agent in the Contact Control Panel (CCP). Tasks can have the following reference types at the time of creation: URL | NUMBER | STRING | DATE | EMAIL. ATTACHMENT is not a supported reference type during task creation.

Source

pub fn get_references(&self) -> &Option<HashMap<String, Reference>>

A formatted URL that is shown to an agent in the Contact Control Panel (CCP). Tasks can have the following reference types at the time of creation: URL | NUMBER | STRING | DATE | EMAIL. ATTACHMENT is not a supported reference type during task creation.

Source

pub fn description(self, input: impl Into<String>) -> Self

A description of the task that is shown to an agent in the Contact Control Panel (CCP).

Source

pub fn set_description(self, input: Option<String>) -> Self

A description of the task that is shown to an agent in the Contact Control Panel (CCP).

Source

pub fn get_description(&self) -> &Option<String>

A description of the task that is shown to an agent in the Contact Control Panel (CCP).

Source

pub fn client_token(self, input: impl Into<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

Source

pub fn set_client_token(self, input: Option<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

Source

pub fn get_client_token(&self) -> &Option<String>

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

Source

pub fn scheduled_time(self, input: DateTime) -> Self

The timestamp, in Unix Epoch seconds format, at which to start running the inbound flow. The scheduled time cannot be in the past. It must be within up to 6 days in future.

Source

pub fn set_scheduled_time(self, input: Option<DateTime>) -> Self

The timestamp, in Unix Epoch seconds format, at which to start running the inbound flow. The scheduled time cannot be in the past. It must be within up to 6 days in future.

Source

pub fn get_scheduled_time(&self) -> &Option<DateTime>

The timestamp, in Unix Epoch seconds format, at which to start running the inbound flow. The scheduled time cannot be in the past. It must be within up to 6 days in future.

Source

pub fn task_template_id(self, input: impl Into<String>) -> Self

A unique identifier for the task template. For more information about task templates, see Create task templates in the Amazon Connect Administrator Guide.

Source

pub fn set_task_template_id(self, input: Option<String>) -> Self

A unique identifier for the task template. For more information about task templates, see Create task templates in the Amazon Connect Administrator Guide.

Source

pub fn get_task_template_id(&self) -> &Option<String>

A unique identifier for the task template. For more information about task templates, see Create task templates in the Amazon Connect Administrator Guide.

Source

pub fn quick_connect_id(self, input: impl Into<String>) -> Self

The identifier for the quick connect. Tasks that are created by using QuickConnectId will use the flow that is defined on agent or queue quick connect. For more information about quick connects, see Create quick connects.

Source

pub fn set_quick_connect_id(self, input: Option<String>) -> Self

The identifier for the quick connect. Tasks that are created by using QuickConnectId will use the flow that is defined on agent or queue quick connect. For more information about quick connects, see Create quick connects.

Source

pub fn get_quick_connect_id(&self) -> &Option<String>

The identifier for the quick connect. Tasks that are created by using QuickConnectId will use the flow that is defined on agent or queue quick connect. For more information about quick connects, see Create quick connects.

Source

pub fn related_contact_id(self, input: impl Into<String>) -> Self

The contactId that is related to this contact. Linking tasks together by using RelatedContactID copies over contact attributes from the related task contact to the new task contact. All updates to user-defined attributes in the new task contact are limited to the individual contact ID, unlike what happens when tasks are linked by using PreviousContactID. There are no limits to the number of contacts that can be linked by using RelatedContactId.

The contactId that is related to this contact. Linking tasks together by using RelatedContactID copies over contact attributes from the related task contact to the new task contact. All updates to user-defined attributes in the new task contact are limited to the individual contact ID, unlike what happens when tasks are linked by using PreviousContactID. There are no limits to the number of contacts that can be linked by using RelatedContactId.

The contactId that is related to this contact. Linking tasks together by using RelatedContactID copies over contact attributes from the related task contact to the new task contact. All updates to user-defined attributes in the new task contact are limited to the individual contact ID, unlike what happens when tasks are linked by using PreviousContactID. There are no limits to the number of contacts that can be linked by using RelatedContactId.

Source

pub fn segment_attributes( self, k: impl Into<String>, v: SegmentAttributeValue, ) -> Self

Adds a key-value pair to segment_attributes.

To override the contents of this collection use set_segment_attributes.

A set of system defined key-value pairs stored on individual contact segments (unique contact ID) using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to set Contact Expiry as a duration in minutes and set a UserId for the User who created a task.

To set contact expiry, a ValueMap must be specified containing the integer number of minutes the contact will be active for before expiring, with SegmentAttributes like { "connect:ContactExpiry": {"ValueMap" : { "ExpiryDuration": { "ValueInteger": 135}}}}.

To set the created by user, a valid AgentResourceId must be supplied, with SegmentAttributes like { "connect:CreatedByUser" { "ValueString": "arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/agent/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"}}}.

Source

pub fn set_segment_attributes( self, input: Option<HashMap<String, SegmentAttributeValue>>, ) -> Self

A set of system defined key-value pairs stored on individual contact segments (unique contact ID) using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to set Contact Expiry as a duration in minutes and set a UserId for the User who created a task.

To set contact expiry, a ValueMap must be specified containing the integer number of minutes the contact will be active for before expiring, with SegmentAttributes like { "connect:ContactExpiry": {"ValueMap" : { "ExpiryDuration": { "ValueInteger": 135}}}}.

To set the created by user, a valid AgentResourceId must be supplied, with SegmentAttributes like { "connect:CreatedByUser" { "ValueString": "arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/agent/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"}}}.

Source

pub fn get_segment_attributes( &self, ) -> &Option<HashMap<String, SegmentAttributeValue>>

A set of system defined key-value pairs stored on individual contact segments (unique contact ID) using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to set Contact Expiry as a duration in minutes and set a UserId for the User who created a task.

To set contact expiry, a ValueMap must be specified containing the integer number of minutes the contact will be active for before expiring, with SegmentAttributes like { "connect:ContactExpiry": {"ValueMap" : { "ExpiryDuration": { "ValueInteger": 135}}}}.

To set the created by user, a valid AgentResourceId must be supplied, with SegmentAttributes like { "connect:CreatedByUser" { "ValueString": "arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/agent/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"}}}.

Source

pub fn build(self) -> Result<StartTaskContactInput, BuildError>

Consumes the builder and constructs a StartTaskContactInput.

Source§

impl StartTaskContactInputBuilder

Source

pub async fn send_with( self, client: &Client, ) -> Result<StartTaskContactOutput, SdkError<StartTaskContactError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations§

Source§

impl Clone for StartTaskContactInputBuilder

Source§

fn clone(&self) -> StartTaskContactInputBuilder

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for StartTaskContactInputBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for StartTaskContactInputBuilder

Source§

fn default() -> StartTaskContactInputBuilder

Returns the “default value” for a type. Read more
Source§

impl PartialEq for StartTaskContactInputBuilder

Source§

fn eq(&self, other: &StartTaskContactInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl StructuralPartialEq for StartTaskContactInputBuilder

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

§Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T