#[non_exhaustive]pub struct GetControlOutput {
pub arn: String,
pub name: String,
pub description: String,
pub behavior: ControlBehavior,
pub region_configuration: Option<RegionConfiguration>,
pub implementation: Option<ImplementationDetails>,
pub parameters: Option<Vec<ControlParameter>>,
/* private fields */
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.arn: StringThe Amazon Resource Name (ARN) of the control.
name: StringThe display name of the control.
description: StringA description of what the control does.
behavior: ControlBehaviorA term that identifies the control's functional behavior. One of Preventive, Detective, Proactive
region_configuration: Option<RegionConfiguration>Returns information about the control, including the scope of the control, if enabled, and the Regions in which the control currently is available for deployment. For more information about scope, see Global services.
If you are applying controls through an Amazon Web Services Control Tower landing zone environment, remember that the values returned in the RegionConfiguration API operation are not related to the governed Regions in your landing zone. For example, if you are governing Regions A,B,and C while the control is available in Regions A, B, C, and D, you'd see a response with DeployableRegions of A, B, C, and D for a control with REGIONAL scope, even though you may not intend to deploy the control in Region D, because you do not govern it through your landing zone.
implementation: Option<ImplementationDetails>Returns information about the control, as an ImplementationDetails object that shows the underlying implementation type for a control.
parameters: Option<Vec<ControlParameter>>Returns an array of ControlParameter objects that specify the parameters a control supports. An empty list is returned for controls that don’t support parameters.
Implementations§
Source§impl GetControlOutput
impl GetControlOutput
Sourcepub fn description(&self) -> &str
pub fn description(&self) -> &str
A description of what the control does.
Sourcepub fn behavior(&self) -> &ControlBehavior
pub fn behavior(&self) -> &ControlBehavior
A term that identifies the control's functional behavior. One of Preventive, Detective, Proactive
Sourcepub fn region_configuration(&self) -> Option<&RegionConfiguration>
pub fn region_configuration(&self) -> Option<&RegionConfiguration>
Returns information about the control, including the scope of the control, if enabled, and the Regions in which the control currently is available for deployment. For more information about scope, see Global services.
If you are applying controls through an Amazon Web Services Control Tower landing zone environment, remember that the values returned in the RegionConfiguration API operation are not related to the governed Regions in your landing zone. For example, if you are governing Regions A,B,and C while the control is available in Regions A, B, C, and D, you'd see a response with DeployableRegions of A, B, C, and D for a control with REGIONAL scope, even though you may not intend to deploy the control in Region D, because you do not govern it through your landing zone.
Sourcepub fn implementation(&self) -> Option<&ImplementationDetails>
pub fn implementation(&self) -> Option<&ImplementationDetails>
Returns information about the control, as an ImplementationDetails object that shows the underlying implementation type for a control.
Sourcepub fn parameters(&self) -> &[ControlParameter]
pub fn parameters(&self) -> &[ControlParameter]
Returns an array of ControlParameter objects that specify the parameters a control supports. An empty list is returned for controls that don’t support parameters.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .parameters.is_none().
Source§impl GetControlOutput
impl GetControlOutput
Sourcepub fn builder() -> GetControlOutputBuilder
pub fn builder() -> GetControlOutputBuilder
Creates a new builder-style object to manufacture GetControlOutput.
Trait Implementations§
Source§impl Clone for GetControlOutput
impl Clone for GetControlOutput
Source§fn clone(&self) -> GetControlOutput
fn clone(&self) -> GetControlOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for GetControlOutput
impl Debug for GetControlOutput
Source§impl PartialEq for GetControlOutput
impl PartialEq for GetControlOutput
Source§impl RequestId for GetControlOutput
impl RequestId for GetControlOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None if the service could not be reached.impl StructuralPartialEq for GetControlOutput
Auto Trait Implementations§
impl Freeze for GetControlOutput
impl RefUnwindSafe for GetControlOutput
impl Send for GetControlOutput
impl Sync for GetControlOutput
impl Unpin for GetControlOutput
impl UnwindSafe for GetControlOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);