pub struct GetSavingsPlansCoverageFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetSavingsPlansCoverage.
Retrieves the Savings Plans covered for your account. This enables you to see how much of your cost is covered by a Savings Plan. An organization’s management account can see the coverage of the associated member accounts. This supports dimensions, Cost Categories, and nested expressions. For any time period, you can filter data for Savings Plans usage with the following dimensions:
-
LINKED_ACCOUNT -
REGION -
SERVICE -
INSTANCE_FAMILY
To determine valid values for a dimension, use the GetDimensionValues operation.
Implementations§
Source§impl GetSavingsPlansCoverageFluentBuilder
impl GetSavingsPlansCoverageFluentBuilder
Sourcepub fn as_input(&self) -> &GetSavingsPlansCoverageInputBuilder
pub fn as_input(&self) -> &GetSavingsPlansCoverageInputBuilder
Access the GetSavingsPlansCoverage as a reference.
Sourcepub async fn send(
self,
) -> Result<GetSavingsPlansCoverageOutput, SdkError<GetSavingsPlansCoverageError, HttpResponse>>
pub async fn send( self, ) -> Result<GetSavingsPlansCoverageOutput, SdkError<GetSavingsPlansCoverageError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetSavingsPlansCoverageOutput, GetSavingsPlansCoverageError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetSavingsPlansCoverageOutput, GetSavingsPlansCoverageError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> GetSavingsPlansCoveragePaginator
pub fn into_paginator(self) -> GetSavingsPlansCoveragePaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn time_period(self, input: DateInterval) -> Self
pub fn time_period(self, input: DateInterval) -> Self
The time period that you want the usage and costs for. The Start date must be within 13 months. The End date must be after the Start date, and before the current date. Future dates can't be used as an End date.
Sourcepub fn set_time_period(self, input: Option<DateInterval>) -> Self
pub fn set_time_period(self, input: Option<DateInterval>) -> Self
The time period that you want the usage and costs for. The Start date must be within 13 months. The End date must be after the Start date, and before the current date. Future dates can't be used as an End date.
Sourcepub fn get_time_period(&self) -> &Option<DateInterval>
pub fn get_time_period(&self) -> &Option<DateInterval>
The time period that you want the usage and costs for. The Start date must be within 13 months. The End date must be after the Start date, and before the current date. Future dates can't be used as an End date.
Sourcepub fn group_by(self, input: GroupDefinition) -> Self
pub fn group_by(self, input: GroupDefinition) -> Self
Appends an item to GroupBy.
To override the contents of this collection use set_group_by.
You can group the data using the attributes INSTANCE_FAMILY, REGION, or SERVICE.
Sourcepub fn set_group_by(self, input: Option<Vec<GroupDefinition>>) -> Self
pub fn set_group_by(self, input: Option<Vec<GroupDefinition>>) -> Self
You can group the data using the attributes INSTANCE_FAMILY, REGION, or SERVICE.
Sourcepub fn get_group_by(&self) -> &Option<Vec<GroupDefinition>>
pub fn get_group_by(&self) -> &Option<Vec<GroupDefinition>>
You can group the data using the attributes INSTANCE_FAMILY, REGION, or SERVICE.
Sourcepub fn granularity(self, input: Granularity) -> Self
pub fn granularity(self, input: Granularity) -> Self
The granularity of the Amazon Web Services cost data for your Savings Plans. Granularity can't be set if GroupBy is set.
The GetSavingsPlansCoverage operation supports only DAILY and MONTHLY granularities.
Sourcepub fn set_granularity(self, input: Option<Granularity>) -> Self
pub fn set_granularity(self, input: Option<Granularity>) -> Self
The granularity of the Amazon Web Services cost data for your Savings Plans. Granularity can't be set if GroupBy is set.
The GetSavingsPlansCoverage operation supports only DAILY and MONTHLY granularities.
Sourcepub fn get_granularity(&self) -> &Option<Granularity>
pub fn get_granularity(&self) -> &Option<Granularity>
The granularity of the Amazon Web Services cost data for your Savings Plans. Granularity can't be set if GroupBy is set.
The GetSavingsPlansCoverage operation supports only DAILY and MONTHLY granularities.
Sourcepub fn filter(self, input: Expression) -> Self
pub fn filter(self, input: Expression) -> Self
Filters Savings Plans coverage data by dimensions. You can filter data for Savings Plans usage with the following dimensions:
-
LINKED_ACCOUNT -
REGION -
SERVICE -
INSTANCE_FAMILY
GetSavingsPlansCoverage uses the same Expression object as the other operations, but only AND is supported among each dimension. If there are multiple values for a dimension, they are OR'd together.
Cost category is also supported.
Sourcepub fn set_filter(self, input: Option<Expression>) -> Self
pub fn set_filter(self, input: Option<Expression>) -> Self
Filters Savings Plans coverage data by dimensions. You can filter data for Savings Plans usage with the following dimensions:
-
LINKED_ACCOUNT -
REGION -
SERVICE -
INSTANCE_FAMILY
GetSavingsPlansCoverage uses the same Expression object as the other operations, but only AND is supported among each dimension. If there are multiple values for a dimension, they are OR'd together.
Cost category is also supported.
Sourcepub fn get_filter(&self) -> &Option<Expression>
pub fn get_filter(&self) -> &Option<Expression>
Filters Savings Plans coverage data by dimensions. You can filter data for Savings Plans usage with the following dimensions:
-
LINKED_ACCOUNT -
REGION -
SERVICE -
INSTANCE_FAMILY
GetSavingsPlansCoverage uses the same Expression object as the other operations, but only AND is supported among each dimension. If there are multiple values for a dimension, they are OR'd together.
Cost category is also supported.
Sourcepub fn metrics(self, input: impl Into<String>) -> Self
pub fn metrics(self, input: impl Into<String>) -> Self
Appends an item to Metrics.
To override the contents of this collection use set_metrics.
The measurement that you want your Savings Plans coverage reported in. The only valid value is SpendCoveredBySavingsPlans.
Sourcepub fn set_metrics(self, input: Option<Vec<String>>) -> Self
pub fn set_metrics(self, input: Option<Vec<String>>) -> Self
The measurement that you want your Savings Plans coverage reported in. The only valid value is SpendCoveredBySavingsPlans.
Sourcepub fn get_metrics(&self) -> &Option<Vec<String>>
pub fn get_metrics(&self) -> &Option<Vec<String>>
The measurement that you want your Savings Plans coverage reported in. The only valid value is SpendCoveredBySavingsPlans.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The token to retrieve the next set of results. Amazon Web Services provides the token when the response from a previous call has more results than the maximum page size.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The token to retrieve the next set of results. Amazon Web Services provides the token when the response from a previous call has more results than the maximum page size.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The token to retrieve the next set of results. Amazon Web Services provides the token when the response from a previous call has more results than the maximum page size.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The number of items to be returned in a response. The default is 20, with a minimum value of 1.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The number of items to be returned in a response. The default is 20, with a minimum value of 1.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The number of items to be returned in a response. The default is 20, with a minimum value of 1.
Sourcepub fn sort_by(self, input: SortDefinition) -> Self
pub fn sort_by(self, input: SortDefinition) -> Self
The value that you want to sort the data by.
The following values are supported for Key:
-
SpendCoveredBySavingsPlan -
OnDemandCost -
CoveragePercentage -
TotalCost -
InstanceFamily -
Region -
Service
The supported values for SortOrder are ASCENDING and DESCENDING.
Sourcepub fn set_sort_by(self, input: Option<SortDefinition>) -> Self
pub fn set_sort_by(self, input: Option<SortDefinition>) -> Self
The value that you want to sort the data by.
The following values are supported for Key:
-
SpendCoveredBySavingsPlan -
OnDemandCost -
CoveragePercentage -
TotalCost -
InstanceFamily -
Region -
Service
The supported values for SortOrder are ASCENDING and DESCENDING.
Sourcepub fn get_sort_by(&self) -> &Option<SortDefinition>
pub fn get_sort_by(&self) -> &Option<SortDefinition>
The value that you want to sort the data by.
The following values are supported for Key:
-
SpendCoveredBySavingsPlan -
OnDemandCost -
CoveragePercentage -
TotalCost -
InstanceFamily -
Region -
Service
The supported values for SortOrder are ASCENDING and DESCENDING.
Trait Implementations§
Source§impl Clone for GetSavingsPlansCoverageFluentBuilder
impl Clone for GetSavingsPlansCoverageFluentBuilder
Source§fn clone(&self) -> GetSavingsPlansCoverageFluentBuilder
fn clone(&self) -> GetSavingsPlansCoverageFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetSavingsPlansCoverageFluentBuilder
impl !RefUnwindSafe for GetSavingsPlansCoverageFluentBuilder
impl Send for GetSavingsPlansCoverageFluentBuilder
impl Sync for GetSavingsPlansCoverageFluentBuilder
impl Unpin for GetSavingsPlansCoverageFluentBuilder
impl !UnwindSafe for GetSavingsPlansCoverageFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);