#[non_exhaustive]pub struct CreateReplicationTaskInput {Show 13 fields
pub replication_task_identifier: Option<String>,
pub source_endpoint_arn: Option<String>,
pub target_endpoint_arn: Option<String>,
pub replication_instance_arn: Option<String>,
pub migration_type: Option<MigrationTypeValue>,
pub table_mappings: Option<String>,
pub replication_task_settings: Option<String>,
pub cdc_start_time: Option<DateTime>,
pub cdc_start_position: Option<String>,
pub cdc_stop_position: Option<String>,
pub tags: Option<Vec<Tag>>,
pub task_data: Option<String>,
pub resource_identifier: Option<String>,
}Expand description
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.replication_task_identifier: Option<String>An identifier for the replication task.
Constraints:
-
Must contain 1-255 alphanumeric characters or hyphens.
-
First character must be a letter.
-
Cannot end with a hyphen or contain two consecutive hyphens.
source_endpoint_arn: Option<String>An Amazon Resource Name (ARN) that uniquely identifies the source endpoint.
target_endpoint_arn: Option<String>An Amazon Resource Name (ARN) that uniquely identifies the target endpoint.
replication_instance_arn: Option<String>The Amazon Resource Name (ARN) of a replication instance.
migration_type: Option<MigrationTypeValue>The migration type. Valid values: full-load | cdc | full-load-and-cdc
table_mappings: Option<String>The table mappings for the task, in JSON format. For more information, see Using Table Mapping to Specify Task Settings in the Database Migration Service User Guide.
replication_task_settings: Option<String>Overall settings for the task, in JSON format. For more information, see Specifying Task Settings for Database Migration Service Tasks in the Database Migration Service User Guide.
cdc_start_time: Option<DateTime>Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.
Timestamp Example: --cdc-start-time “2018-03-08T12:12:12”
cdc_start_position: Option<String>Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want a CDC operation to start. Specifying both values results in an error.
The value can be in date, checkpoint, or LSN/SCN format.
Date Example: --cdc-start-position “2018-03-08T12:12:12”
Checkpoint Example: --cdc-start-position "checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93"
LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373”
When you use this task setting with a source PostgreSQL database, a logical replication slot should already be created and associated with the source endpoint. You can verify this by setting the slotName extra connection attribute to the name of this logical replication slot. For more information, see Extra Connection Attributes When Using PostgreSQL as a Source for DMS.
cdc_stop_position: Option<String>Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
Server time example: --cdc-stop-position “server_time:2018-02-09T12:12:12”
Commit time example: --cdc-stop-position “commit_time:2018-02-09T12:12:12“
One or more tags to be assigned to the replication task.
task_data: Option<String>Supplemental information that the task requires to migrate the data for certain source and target endpoints. For more information, see Specifying Supplemental Data for Task Settings in the Database Migration Service User Guide.
resource_identifier: Option<String>A friendly name for the resource identifier at the end of the EndpointArn response parameter that is returned in the created Endpoint object. The value for this parameter can have up to 31 characters. It can contain only ASCII letters, digits, and hyphen ('-'). Also, it can't end with a hyphen or contain two consecutive hyphens, and can only begin with a letter, such as Example-App-ARN1. For example, this value might result in the EndpointArn value arn:aws:dms:eu-west-1:012345678901:rep:Example-App-ARN1. If you don't specify a ResourceIdentifier value, DMS generates a default identifier value for the end of EndpointArn.
Implementations§
Source§impl CreateReplicationTaskInput
impl CreateReplicationTaskInput
Sourcepub fn replication_task_identifier(&self) -> Option<&str>
pub fn replication_task_identifier(&self) -> Option<&str>
An identifier for the replication task.
Constraints:
-
Must contain 1-255 alphanumeric characters or hyphens.
-
First character must be a letter.
-
Cannot end with a hyphen or contain two consecutive hyphens.
Sourcepub fn source_endpoint_arn(&self) -> Option<&str>
pub fn source_endpoint_arn(&self) -> Option<&str>
An Amazon Resource Name (ARN) that uniquely identifies the source endpoint.
Sourcepub fn target_endpoint_arn(&self) -> Option<&str>
pub fn target_endpoint_arn(&self) -> Option<&str>
An Amazon Resource Name (ARN) that uniquely identifies the target endpoint.
Sourcepub fn replication_instance_arn(&self) -> Option<&str>
pub fn replication_instance_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of a replication instance.
Sourcepub fn migration_type(&self) -> Option<&MigrationTypeValue>
pub fn migration_type(&self) -> Option<&MigrationTypeValue>
The migration type. Valid values: full-load | cdc | full-load-and-cdc
Sourcepub fn table_mappings(&self) -> Option<&str>
pub fn table_mappings(&self) -> Option<&str>
The table mappings for the task, in JSON format. For more information, see Using Table Mapping to Specify Task Settings in the Database Migration Service User Guide.
Sourcepub fn replication_task_settings(&self) -> Option<&str>
pub fn replication_task_settings(&self) -> Option<&str>
Overall settings for the task, in JSON format. For more information, see Specifying Task Settings for Database Migration Service Tasks in the Database Migration Service User Guide.
Sourcepub fn cdc_start_time(&self) -> Option<&DateTime>
pub fn cdc_start_time(&self) -> Option<&DateTime>
Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.
Timestamp Example: --cdc-start-time “2018-03-08T12:12:12”
Sourcepub fn cdc_start_position(&self) -> Option<&str>
pub fn cdc_start_position(&self) -> Option<&str>
Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want a CDC operation to start. Specifying both values results in an error.
The value can be in date, checkpoint, or LSN/SCN format.
Date Example: --cdc-start-position “2018-03-08T12:12:12”
Checkpoint Example: --cdc-start-position "checkpoint:V1#27#mysql-bin-changelog.157832:1975:-1:2002:677883278264080:mysql-bin-changelog.157832:1876#0#0#*#0#93"
LSN Example: --cdc-start-position “mysql-bin-changelog.000024:373”
When you use this task setting with a source PostgreSQL database, a logical replication slot should already be created and associated with the source endpoint. You can verify this by setting the slotName extra connection attribute to the name of this logical replication slot. For more information, see Extra Connection Attributes When Using PostgreSQL as a Source for DMS.
Sourcepub fn cdc_stop_position(&self) -> Option<&str>
pub fn cdc_stop_position(&self) -> Option<&str>
Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
Server time example: --cdc-stop-position “server_time:2018-02-09T12:12:12”
Commit time example: --cdc-stop-position “commit_time:2018-02-09T12:12:12“
One or more tags to be assigned to the replication task.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().
Sourcepub fn task_data(&self) -> Option<&str>
pub fn task_data(&self) -> Option<&str>
Supplemental information that the task requires to migrate the data for certain source and target endpoints. For more information, see Specifying Supplemental Data for Task Settings in the Database Migration Service User Guide.
Sourcepub fn resource_identifier(&self) -> Option<&str>
pub fn resource_identifier(&self) -> Option<&str>
A friendly name for the resource identifier at the end of the EndpointArn response parameter that is returned in the created Endpoint object. The value for this parameter can have up to 31 characters. It can contain only ASCII letters, digits, and hyphen ('-'). Also, it can't end with a hyphen or contain two consecutive hyphens, and can only begin with a letter, such as Example-App-ARN1. For example, this value might result in the EndpointArn value arn:aws:dms:eu-west-1:012345678901:rep:Example-App-ARN1. If you don't specify a ResourceIdentifier value, DMS generates a default identifier value for the end of EndpointArn.
Source§impl CreateReplicationTaskInput
impl CreateReplicationTaskInput
Sourcepub fn builder() -> CreateReplicationTaskInputBuilder
pub fn builder() -> CreateReplicationTaskInputBuilder
Creates a new builder-style object to manufacture CreateReplicationTaskInput.
Trait Implementations§
Source§impl Clone for CreateReplicationTaskInput
impl Clone for CreateReplicationTaskInput
Source§fn clone(&self) -> CreateReplicationTaskInput
fn clone(&self) -> CreateReplicationTaskInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CreateReplicationTaskInput
impl Debug for CreateReplicationTaskInput
impl StructuralPartialEq for CreateReplicationTaskInput
Auto Trait Implementations§
impl Freeze for CreateReplicationTaskInput
impl RefUnwindSafe for CreateReplicationTaskInput
impl Send for CreateReplicationTaskInput
impl Sync for CreateReplicationTaskInput
impl Unpin for CreateReplicationTaskInput
impl UnwindSafe for CreateReplicationTaskInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);