#[non_exhaustive]pub struct ModifyInstanceProfileInput {
pub instance_profile_identifier: Option<String>,
pub availability_zone: Option<String>,
pub kms_key_arn: Option<String>,
pub publicly_accessible: Option<bool>,
pub network_type: Option<String>,
pub instance_profile_name: Option<String>,
pub description: Option<String>,
pub subnet_group_identifier: Option<String>,
pub vpc_security_groups: Option<Vec<String>>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.instance_profile_identifier: Option<String>The identifier of the instance profile. Identifiers must begin with a letter and must contain only ASCII letters, digits, and hyphens. They can't end with a hyphen, or contain two consecutive hyphens.
availability_zone: Option<String>The Availability Zone where the instance profile runs.
kms_key_arn: Option<String>The Amazon Resource Name (ARN) of the KMS key that is used to encrypt the connection parameters for the instance profile.
If you don't specify a value for the KmsKeyArn parameter, then DMS uses your default encryption key.
KMS creates the default encryption key for your Amazon Web Services account. Your Amazon Web Services account has a different default encryption key for each Amazon Web Services Region.
publicly_accessible: Option<bool>Specifies the accessibility options for the instance profile. A value of true represents an instance profile with a public IP address. A value of false represents an instance profile with a private IP address. The default value is true.
network_type: Option<String>Specifies the network type for the instance profile. A value of IPV4 represents an instance profile with IPv4 network type and only supports IPv4 addressing. A value of IPV6 represents an instance profile with IPv6 network type and only supports IPv6 addressing. A value of DUAL represents an instance profile with dual network type that supports IPv4 and IPv6 addressing.
instance_profile_name: Option<String>A user-friendly name for the instance profile.
description: Option<String>A user-friendly description for the instance profile.
subnet_group_identifier: Option<String>A subnet group to associate with the instance profile.
vpc_security_groups: Option<Vec<String>>Specifies the VPC security groups to be used with the instance profile. The VPC security group must work with the VPC containing the instance profile.
Implementations§
Source§impl ModifyInstanceProfileInput
impl ModifyInstanceProfileInput
Sourcepub fn instance_profile_identifier(&self) -> Option<&str>
pub fn instance_profile_identifier(&self) -> Option<&str>
The identifier of the instance profile. Identifiers must begin with a letter and must contain only ASCII letters, digits, and hyphens. They can't end with a hyphen, or contain two consecutive hyphens.
Sourcepub fn availability_zone(&self) -> Option<&str>
pub fn availability_zone(&self) -> Option<&str>
The Availability Zone where the instance profile runs.
Sourcepub fn kms_key_arn(&self) -> Option<&str>
pub fn kms_key_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the KMS key that is used to encrypt the connection parameters for the instance profile.
If you don't specify a value for the KmsKeyArn parameter, then DMS uses your default encryption key.
KMS creates the default encryption key for your Amazon Web Services account. Your Amazon Web Services account has a different default encryption key for each Amazon Web Services Region.
Sourcepub fn publicly_accessible(&self) -> Option<bool>
pub fn publicly_accessible(&self) -> Option<bool>
Specifies the accessibility options for the instance profile. A value of true represents an instance profile with a public IP address. A value of false represents an instance profile with a private IP address. The default value is true.
Sourcepub fn network_type(&self) -> Option<&str>
pub fn network_type(&self) -> Option<&str>
Specifies the network type for the instance profile. A value of IPV4 represents an instance profile with IPv4 network type and only supports IPv4 addressing. A value of IPV6 represents an instance profile with IPv6 network type and only supports IPv6 addressing. A value of DUAL represents an instance profile with dual network type that supports IPv4 and IPv6 addressing.
Sourcepub fn instance_profile_name(&self) -> Option<&str>
pub fn instance_profile_name(&self) -> Option<&str>
A user-friendly name for the instance profile.
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A user-friendly description for the instance profile.
Sourcepub fn subnet_group_identifier(&self) -> Option<&str>
pub fn subnet_group_identifier(&self) -> Option<&str>
A subnet group to associate with the instance profile.
Sourcepub fn vpc_security_groups(&self) -> &[String]
pub fn vpc_security_groups(&self) -> &[String]
Specifies the VPC security groups to be used with the instance profile. The VPC security group must work with the VPC containing the instance profile.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .vpc_security_groups.is_none().
Source§impl ModifyInstanceProfileInput
impl ModifyInstanceProfileInput
Sourcepub fn builder() -> ModifyInstanceProfileInputBuilder
pub fn builder() -> ModifyInstanceProfileInputBuilder
Creates a new builder-style object to manufacture ModifyInstanceProfileInput.
Trait Implementations§
Source§impl Clone for ModifyInstanceProfileInput
impl Clone for ModifyInstanceProfileInput
Source§fn clone(&self) -> ModifyInstanceProfileInput
fn clone(&self) -> ModifyInstanceProfileInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for ModifyInstanceProfileInput
impl Debug for ModifyInstanceProfileInput
impl StructuralPartialEq for ModifyInstanceProfileInput
Auto Trait Implementations§
impl Freeze for ModifyInstanceProfileInput
impl RefUnwindSafe for ModifyInstanceProfileInput
impl Send for ModifyInstanceProfileInput
impl Sync for ModifyInstanceProfileInput
impl Unpin for ModifyInstanceProfileInput
impl UnwindSafe for ModifyInstanceProfileInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);