pub struct StartReplicationFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to StartReplication.
For a given DMS Serverless replication configuration, DMS connects to the source endpoint and collects the metadata to analyze the replication workload. Using this metadata, DMS then computes and provisions the required capacity and starts replicating to the target endpoint using the server resources that DMS has provisioned for the DMS Serverless replication.
Implementations§
Source§impl StartReplicationFluentBuilder
impl StartReplicationFluentBuilder
Sourcepub fn as_input(&self) -> &StartReplicationInputBuilder
pub fn as_input(&self) -> &StartReplicationInputBuilder
Access the StartReplication as a reference.
Sourcepub async fn send(
self,
) -> Result<StartReplicationOutput, SdkError<StartReplicationError, HttpResponse>>
pub async fn send( self, ) -> Result<StartReplicationOutput, SdkError<StartReplicationError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<StartReplicationOutput, StartReplicationError, Self>
pub fn customize( self, ) -> CustomizableOperation<StartReplicationOutput, StartReplicationError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn replication_config_arn(self, input: impl Into<String>) -> Self
pub fn replication_config_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name of the replication for which to start replication.
Sourcepub fn set_replication_config_arn(self, input: Option<String>) -> Self
pub fn set_replication_config_arn(self, input: Option<String>) -> Self
The Amazon Resource Name of the replication for which to start replication.
Sourcepub fn get_replication_config_arn(&self) -> &Option<String>
pub fn get_replication_config_arn(&self) -> &Option<String>
The Amazon Resource Name of the replication for which to start replication.
Sourcepub fn start_replication_type(self, input: impl Into<String>) -> Self
pub fn start_replication_type(self, input: impl Into<String>) -> Self
The replication type.
When the replication type is full-load or full-load-and-cdc, the only valid value for the first run of the replication is start-replication. This option will start the replication.
You can also use ReloadTables to reload specific tables that failed during replication instead of restarting the replication.
The resume-processing option isn't applicable for a full-load replication, because you can't resume partially loaded tables during the full load phase.
For a full-load-and-cdc replication, DMS migrates table data, and then applies data changes that occur on the source. To load all the tables again, and start capturing source changes, use reload-target. Otherwise use resume-processing, to replicate the changes from the last stop position.
Sourcepub fn set_start_replication_type(self, input: Option<String>) -> Self
pub fn set_start_replication_type(self, input: Option<String>) -> Self
The replication type.
When the replication type is full-load or full-load-and-cdc, the only valid value for the first run of the replication is start-replication. This option will start the replication.
You can also use ReloadTables to reload specific tables that failed during replication instead of restarting the replication.
The resume-processing option isn't applicable for a full-load replication, because you can't resume partially loaded tables during the full load phase.
For a full-load-and-cdc replication, DMS migrates table data, and then applies data changes that occur on the source. To load all the tables again, and start capturing source changes, use reload-target. Otherwise use resume-processing, to replicate the changes from the last stop position.
Sourcepub fn get_start_replication_type(&self) -> &Option<String>
pub fn get_start_replication_type(&self) -> &Option<String>
The replication type.
When the replication type is full-load or full-load-and-cdc, the only valid value for the first run of the replication is start-replication. This option will start the replication.
You can also use ReloadTables to reload specific tables that failed during replication instead of restarting the replication.
The resume-processing option isn't applicable for a full-load replication, because you can't resume partially loaded tables during the full load phase.
For a full-load-and-cdc replication, DMS migrates table data, and then applies data changes that occur on the source. To load all the tables again, and start capturing source changes, use reload-target. Otherwise use resume-processing, to replicate the changes from the last stop position.
Sourcepub fn cdc_start_time(self, input: DateTime) -> Self
pub fn cdc_start_time(self, input: DateTime) -> Self
Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.
Sourcepub fn set_cdc_start_time(self, input: Option<DateTime>) -> Self
pub fn set_cdc_start_time(self, input: Option<DateTime>) -> Self
Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.
Sourcepub fn get_cdc_start_time(&self) -> &Option<DateTime>
pub fn get_cdc_start_time(&self) -> &Option<DateTime>
Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.
Sourcepub fn cdc_start_position(self, input: impl Into<String>) -> Self
pub fn cdc_start_position(self, input: impl Into<String>) -> Self
Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want a CDC operation to start. Specifying both values results in an error.
The value can be in date, checkpoint, or LSN/SCN format.
Sourcepub fn set_cdc_start_position(self, input: Option<String>) -> Self
pub fn set_cdc_start_position(self, input: Option<String>) -> Self
Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want a CDC operation to start. Specifying both values results in an error.
The value can be in date, checkpoint, or LSN/SCN format.
Sourcepub fn get_cdc_start_position(&self) -> &Option<String>
pub fn get_cdc_start_position(&self) -> &Option<String>
Indicates when you want a change data capture (CDC) operation to start. Use either CdcStartPosition or CdcStartTime to specify when you want a CDC operation to start. Specifying both values results in an error.
The value can be in date, checkpoint, or LSN/SCN format.
Sourcepub fn cdc_stop_position(self, input: impl Into<String>) -> Self
pub fn cdc_stop_position(self, input: impl Into<String>) -> Self
Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
Sourcepub fn set_cdc_stop_position(self, input: Option<String>) -> Self
pub fn set_cdc_stop_position(self, input: Option<String>) -> Self
Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
Sourcepub fn get_cdc_stop_position(&self) -> &Option<String>
pub fn get_cdc_stop_position(&self) -> &Option<String>
Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
Trait Implementations§
Source§impl Clone for StartReplicationFluentBuilder
impl Clone for StartReplicationFluentBuilder
Source§fn clone(&self) -> StartReplicationFluentBuilder
fn clone(&self) -> StartReplicationFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for StartReplicationFluentBuilder
impl !RefUnwindSafe for StartReplicationFluentBuilder
impl Send for StartReplicationFluentBuilder
impl Sync for StartReplicationFluentBuilder
impl Unpin for StartReplicationFluentBuilder
impl !UnwindSafe for StartReplicationFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);