#[non_exhaustive]pub struct CreateLocationHdfsInput {Show 13 fields
pub subdirectory: Option<String>,
pub name_nodes: Option<Vec<HdfsNameNode>>,
pub block_size: Option<i32>,
pub replication_factor: Option<i32>,
pub kms_key_provider_uri: Option<String>,
pub qop_configuration: Option<QopConfiguration>,
pub authentication_type: Option<HdfsAuthenticationType>,
pub simple_user: Option<String>,
pub kerberos_principal: Option<String>,
pub kerberos_keytab: Option<Blob>,
pub kerberos_krb5_conf: Option<Blob>,
pub agent_arns: Option<Vec<String>>,
pub tags: Option<Vec<TagListEntry>>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.subdirectory: Option<String>A subdirectory in the HDFS cluster. This subdirectory is used to read data from or write data to the HDFS cluster. If the subdirectory isn't specified, it will default to /.
name_nodes: Option<Vec<HdfsNameNode>>The NameNode that manages the HDFS namespace. The NameNode performs operations such as opening, closing, and renaming files and directories. The NameNode contains the information to map blocks of data to the DataNodes. You can use only one NameNode.
block_size: Option<i32>The size of data blocks to write into the HDFS cluster. The block size must be a multiple of 512 bytes. The default block size is 128 mebibytes (MiB).
replication_factor: Option<i32>The number of DataNodes to replicate the data to when writing to the HDFS cluster. By default, data is replicated to three DataNodes.
kms_key_provider_uri: Option<String>The URI of the HDFS cluster's Key Management Server (KMS).
qop_configuration: Option<QopConfiguration>The Quality of Protection (QOP) configuration specifies the Remote Procedure Call (RPC) and data transfer protection settings configured on the Hadoop Distributed File System (HDFS) cluster. If QopConfiguration isn't specified, RpcProtection and DataTransferProtection default to PRIVACY. If you set RpcProtection or DataTransferProtection, the other parameter assumes the same value.
authentication_type: Option<HdfsAuthenticationType>The type of authentication used to determine the identity of the user.
simple_user: Option<String>The user name used to identify the client on the host operating system.
If SIMPLE is specified for AuthenticationType, this parameter is required.
kerberos_principal: Option<String>The Kerberos principal with access to the files and folders on the HDFS cluster.
If KERBEROS is specified for AuthenticationType, this parameter is required.
kerberos_keytab: Option<Blob>The Kerberos key table (keytab) that contains mappings between the defined Kerberos principal and the encrypted keys. You can load the keytab from a file by providing the file's address. If you're using the CLI, it performs base64 encoding for you. Otherwise, provide the base64-encoded text.
If KERBEROS is specified for AuthenticationType, this parameter is required.
kerberos_krb5_conf: Option<Blob>The krb5.conf file that contains the Kerberos configuration information. You can load the krb5.conf file by providing the file's address. If you're using the CLI, it performs the base64 encoding for you. Otherwise, provide the base64-encoded text.
If KERBEROS is specified for AuthenticationType, this parameter is required.
agent_arns: Option<Vec<String>>The Amazon Resource Names (ARNs) of the DataSync agents that can connect to your HDFS cluster.
The key-value pair that represents the tag that you want to add to the location. The value can be an empty string. We recommend using tags to name your resources.
Implementations§
Source§impl CreateLocationHdfsInput
impl CreateLocationHdfsInput
Sourcepub fn subdirectory(&self) -> Option<&str>
pub fn subdirectory(&self) -> Option<&str>
A subdirectory in the HDFS cluster. This subdirectory is used to read data from or write data to the HDFS cluster. If the subdirectory isn't specified, it will default to /.
Sourcepub fn name_nodes(&self) -> &[HdfsNameNode]
pub fn name_nodes(&self) -> &[HdfsNameNode]
The NameNode that manages the HDFS namespace. The NameNode performs operations such as opening, closing, and renaming files and directories. The NameNode contains the information to map blocks of data to the DataNodes. You can use only one NameNode.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .name_nodes.is_none().
Sourcepub fn block_size(&self) -> Option<i32>
pub fn block_size(&self) -> Option<i32>
The size of data blocks to write into the HDFS cluster. The block size must be a multiple of 512 bytes. The default block size is 128 mebibytes (MiB).
Sourcepub fn replication_factor(&self) -> Option<i32>
pub fn replication_factor(&self) -> Option<i32>
The number of DataNodes to replicate the data to when writing to the HDFS cluster. By default, data is replicated to three DataNodes.
Sourcepub fn kms_key_provider_uri(&self) -> Option<&str>
pub fn kms_key_provider_uri(&self) -> Option<&str>
The URI of the HDFS cluster's Key Management Server (KMS).
Sourcepub fn qop_configuration(&self) -> Option<&QopConfiguration>
pub fn qop_configuration(&self) -> Option<&QopConfiguration>
The Quality of Protection (QOP) configuration specifies the Remote Procedure Call (RPC) and data transfer protection settings configured on the Hadoop Distributed File System (HDFS) cluster. If QopConfiguration isn't specified, RpcProtection and DataTransferProtection default to PRIVACY. If you set RpcProtection or DataTransferProtection, the other parameter assumes the same value.
Sourcepub fn authentication_type(&self) -> Option<&HdfsAuthenticationType>
pub fn authentication_type(&self) -> Option<&HdfsAuthenticationType>
The type of authentication used to determine the identity of the user.
Sourcepub fn simple_user(&self) -> Option<&str>
pub fn simple_user(&self) -> Option<&str>
The user name used to identify the client on the host operating system.
If SIMPLE is specified for AuthenticationType, this parameter is required.
Sourcepub fn kerberos_principal(&self) -> Option<&str>
pub fn kerberos_principal(&self) -> Option<&str>
The Kerberos principal with access to the files and folders on the HDFS cluster.
If KERBEROS is specified for AuthenticationType, this parameter is required.
Sourcepub fn kerberos_keytab(&self) -> Option<&Blob>
pub fn kerberos_keytab(&self) -> Option<&Blob>
The Kerberos key table (keytab) that contains mappings between the defined Kerberos principal and the encrypted keys. You can load the keytab from a file by providing the file's address. If you're using the CLI, it performs base64 encoding for you. Otherwise, provide the base64-encoded text.
If KERBEROS is specified for AuthenticationType, this parameter is required.
Sourcepub fn kerberos_krb5_conf(&self) -> Option<&Blob>
pub fn kerberos_krb5_conf(&self) -> Option<&Blob>
The krb5.conf file that contains the Kerberos configuration information. You can load the krb5.conf file by providing the file's address. If you're using the CLI, it performs the base64 encoding for you. Otherwise, provide the base64-encoded text.
If KERBEROS is specified for AuthenticationType, this parameter is required.
Sourcepub fn agent_arns(&self) -> &[String]
pub fn agent_arns(&self) -> &[String]
The Amazon Resource Names (ARNs) of the DataSync agents that can connect to your HDFS cluster.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .agent_arns.is_none().
The key-value pair that represents the tag that you want to add to the location. The value can be an empty string. We recommend using tags to name your resources.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().
Source§impl CreateLocationHdfsInput
impl CreateLocationHdfsInput
Sourcepub fn builder() -> CreateLocationHdfsInputBuilder
pub fn builder() -> CreateLocationHdfsInputBuilder
Creates a new builder-style object to manufacture CreateLocationHdfsInput.
Trait Implementations§
Source§impl Clone for CreateLocationHdfsInput
impl Clone for CreateLocationHdfsInput
Source§fn clone(&self) -> CreateLocationHdfsInput
fn clone(&self) -> CreateLocationHdfsInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CreateLocationHdfsInput
impl Debug for CreateLocationHdfsInput
Source§impl PartialEq for CreateLocationHdfsInput
impl PartialEq for CreateLocationHdfsInput
impl StructuralPartialEq for CreateLocationHdfsInput
Auto Trait Implementations§
impl Freeze for CreateLocationHdfsInput
impl RefUnwindSafe for CreateLocationHdfsInput
impl Send for CreateLocationHdfsInput
impl Sync for CreateLocationHdfsInput
impl Unpin for CreateLocationHdfsInput
impl UnwindSafe for CreateLocationHdfsInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);