pub struct UpdateLocationFsxOpenZfsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to UpdateLocationFsxOpenZfs.
Modifies the following configuration parameters of the Amazon FSx for OpenZFS transfer location that you're using with DataSync.
For more information, see Configuring DataSync transfers with FSx for OpenZFS.
Request parameters related to SMB aren't supported with the UpdateLocationFsxOpenZfs operation.
Implementations§
Source§impl UpdateLocationFsxOpenZfsFluentBuilder
impl UpdateLocationFsxOpenZfsFluentBuilder
Sourcepub fn as_input(&self) -> &UpdateLocationFsxOpenZfsInputBuilder
pub fn as_input(&self) -> &UpdateLocationFsxOpenZfsInputBuilder
Access the UpdateLocationFsxOpenZfs as a reference.
Sourcepub async fn send(
self,
) -> Result<UpdateLocationFsxOpenZfsOutput, SdkError<UpdateLocationFsxOpenZfsError, HttpResponse>>
pub async fn send( self, ) -> Result<UpdateLocationFsxOpenZfsOutput, SdkError<UpdateLocationFsxOpenZfsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<UpdateLocationFsxOpenZfsOutput, UpdateLocationFsxOpenZfsError, Self>
pub fn customize( self, ) -> CustomizableOperation<UpdateLocationFsxOpenZfsOutput, UpdateLocationFsxOpenZfsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn location_arn(self, input: impl Into<String>) -> Self
pub fn location_arn(self, input: impl Into<String>) -> Self
Specifies the Amazon Resource Name (ARN) of the FSx for OpenZFS transfer location that you're updating.
Sourcepub fn set_location_arn(self, input: Option<String>) -> Self
pub fn set_location_arn(self, input: Option<String>) -> Self
Specifies the Amazon Resource Name (ARN) of the FSx for OpenZFS transfer location that you're updating.
Sourcepub fn get_location_arn(&self) -> &Option<String>
pub fn get_location_arn(&self) -> &Option<String>
Specifies the Amazon Resource Name (ARN) of the FSx for OpenZFS transfer location that you're updating.
Sourcepub fn protocol(self, input: FsxProtocol) -> Self
pub fn protocol(self, input: FsxProtocol) -> Self
Specifies the data transfer protocol that DataSync uses to access your Amazon FSx file system.
Sourcepub fn set_protocol(self, input: Option<FsxProtocol>) -> Self
pub fn set_protocol(self, input: Option<FsxProtocol>) -> Self
Specifies the data transfer protocol that DataSync uses to access your Amazon FSx file system.
Sourcepub fn get_protocol(&self) -> &Option<FsxProtocol>
pub fn get_protocol(&self) -> &Option<FsxProtocol>
Specifies the data transfer protocol that DataSync uses to access your Amazon FSx file system.
Sourcepub fn subdirectory(self, input: impl Into<String>) -> Self
pub fn subdirectory(self, input: impl Into<String>) -> Self
Specifies a subdirectory in the location's path that must begin with /fsx. DataSync uses this subdirectory to read or write data (depending on whether the file system is a source or destination location).
Sourcepub fn set_subdirectory(self, input: Option<String>) -> Self
pub fn set_subdirectory(self, input: Option<String>) -> Self
Specifies a subdirectory in the location's path that must begin with /fsx. DataSync uses this subdirectory to read or write data (depending on whether the file system is a source or destination location).
Sourcepub fn get_subdirectory(&self) -> &Option<String>
pub fn get_subdirectory(&self) -> &Option<String>
Specifies a subdirectory in the location's path that must begin with /fsx. DataSync uses this subdirectory to read or write data (depending on whether the file system is a source or destination location).
Trait Implementations§
Source§impl Clone for UpdateLocationFsxOpenZfsFluentBuilder
impl Clone for UpdateLocationFsxOpenZfsFluentBuilder
Source§fn clone(&self) -> UpdateLocationFsxOpenZfsFluentBuilder
fn clone(&self) -> UpdateLocationFsxOpenZfsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for UpdateLocationFsxOpenZfsFluentBuilder
impl !RefUnwindSafe for UpdateLocationFsxOpenZfsFluentBuilder
impl Send for UpdateLocationFsxOpenZfsFluentBuilder
impl Sync for UpdateLocationFsxOpenZfsFluentBuilder
impl Unpin for UpdateLocationFsxOpenZfsFluentBuilder
impl !UnwindSafe for UpdateLocationFsxOpenZfsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);