#[non_exhaustive]pub struct DeleteDataSourceOutput {Show 22 fields
pub id: String,
pub status: Option<DataSourceStatus>,
pub type: Option<String>,
pub name: String,
pub description: Option<String>,
pub domain_id: String,
pub project_id: String,
pub environment_id: Option<String>,
pub connection_id: Option<String>,
pub configuration: Option<DataSourceConfigurationOutput>,
pub enable_setting: Option<EnableSetting>,
pub publish_on_import: Option<bool>,
pub asset_forms_output: Option<Vec<FormOutput>>,
pub schedule: Option<ScheduleConfiguration>,
pub last_run_status: Option<DataSourceRunStatus>,
pub last_run_at: Option<DateTime>,
pub last_run_error_message: Option<DataSourceErrorMessage>,
pub error_message: Option<DataSourceErrorMessage>,
pub created_at: Option<DateTime>,
pub updated_at: Option<DateTime>,
pub self_grant_status: Option<SelfGrantStatusOutput>,
pub retain_permissions_on_revoke_failure: Option<bool>,
/* private fields */
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.id: StringThe ID of the data source that is deleted.
status: Option<DataSourceStatus>The status of this data source.
type: Option<String>The type of this data source.
name: StringThe name of the data source that is deleted.
description: Option<String>The description of the data source that is deleted.
domain_id: StringThe ID of the Amazon DataZone domain in which the data source is deleted.
project_id: StringThe ID of the project in which this data source exists and from which it's deleted.
environment_id: Option<String>The ID of the environemnt associated with this data source.
connection_id: Option<String>The ID of the connection that is deleted.
configuration: Option<DataSourceConfigurationOutput>The configuration of the data source that is deleted.
enable_setting: Option<EnableSetting>The enable setting of the data source that specifies whether the data source is enabled or disabled.
publish_on_import: Option<bool>Specifies whether the assets that this data source creates in the inventory are to be also automatically published to the catalog.
asset_forms_output: Option<Vec<FormOutput>>The asset data forms associated with this data source.
schedule: Option<ScheduleConfiguration>The schedule of runs for this data source.
last_run_status: Option<DataSourceRunStatus>The status of the last run of this data source.
last_run_at: Option<DateTime>The timestamp of when the data source was last run.
last_run_error_message: Option<DataSourceErrorMessage>Specifies the error message that is returned if the operation cannot be successfully completed.
error_message: Option<DataSourceErrorMessage>Specifies the error message that is returned if the operation cannot be successfully completed.
created_at: Option<DateTime>The timestamp of when this data source was created.
updated_at: Option<DateTime>The timestamp of when this data source was updated.
self_grant_status: Option<SelfGrantStatusOutput>Specifies the status of the self-granting functionality.
retain_permissions_on_revoke_failure: Option<bool>Specifies that the granted permissions are retained in case of a self-subscribe functionality failure for a data source.
Implementations§
Source§impl DeleteDataSourceOutput
impl DeleteDataSourceOutput
Sourcepub fn status(&self) -> Option<&DataSourceStatus>
pub fn status(&self) -> Option<&DataSourceStatus>
The status of this data source.
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
The description of the data source that is deleted.
Sourcepub fn domain_id(&self) -> &str
pub fn domain_id(&self) -> &str
The ID of the Amazon DataZone domain in which the data source is deleted.
Sourcepub fn project_id(&self) -> &str
pub fn project_id(&self) -> &str
The ID of the project in which this data source exists and from which it's deleted.
Sourcepub fn environment_id(&self) -> Option<&str>
pub fn environment_id(&self) -> Option<&str>
The ID of the environemnt associated with this data source.
Sourcepub fn connection_id(&self) -> Option<&str>
pub fn connection_id(&self) -> Option<&str>
The ID of the connection that is deleted.
Sourcepub fn configuration(&self) -> Option<&DataSourceConfigurationOutput>
pub fn configuration(&self) -> Option<&DataSourceConfigurationOutput>
The configuration of the data source that is deleted.
Sourcepub fn enable_setting(&self) -> Option<&EnableSetting>
pub fn enable_setting(&self) -> Option<&EnableSetting>
The enable setting of the data source that specifies whether the data source is enabled or disabled.
Sourcepub fn publish_on_import(&self) -> Option<bool>
pub fn publish_on_import(&self) -> Option<bool>
Specifies whether the assets that this data source creates in the inventory are to be also automatically published to the catalog.
Sourcepub fn asset_forms_output(&self) -> &[FormOutput]
pub fn asset_forms_output(&self) -> &[FormOutput]
The asset data forms associated with this data source.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .asset_forms_output.is_none().
Sourcepub fn schedule(&self) -> Option<&ScheduleConfiguration>
pub fn schedule(&self) -> Option<&ScheduleConfiguration>
The schedule of runs for this data source.
Sourcepub fn last_run_status(&self) -> Option<&DataSourceRunStatus>
pub fn last_run_status(&self) -> Option<&DataSourceRunStatus>
The status of the last run of this data source.
Sourcepub fn last_run_at(&self) -> Option<&DateTime>
pub fn last_run_at(&self) -> Option<&DateTime>
The timestamp of when the data source was last run.
Sourcepub fn last_run_error_message(&self) -> Option<&DataSourceErrorMessage>
pub fn last_run_error_message(&self) -> Option<&DataSourceErrorMessage>
Specifies the error message that is returned if the operation cannot be successfully completed.
Sourcepub fn error_message(&self) -> Option<&DataSourceErrorMessage>
pub fn error_message(&self) -> Option<&DataSourceErrorMessage>
Specifies the error message that is returned if the operation cannot be successfully completed.
Sourcepub fn created_at(&self) -> Option<&DateTime>
pub fn created_at(&self) -> Option<&DateTime>
The timestamp of when this data source was created.
Sourcepub fn updated_at(&self) -> Option<&DateTime>
pub fn updated_at(&self) -> Option<&DateTime>
The timestamp of when this data source was updated.
Sourcepub fn self_grant_status(&self) -> Option<&SelfGrantStatusOutput>
pub fn self_grant_status(&self) -> Option<&SelfGrantStatusOutput>
Specifies the status of the self-granting functionality.
Sourcepub fn retain_permissions_on_revoke_failure(&self) -> Option<bool>
pub fn retain_permissions_on_revoke_failure(&self) -> Option<bool>
Specifies that the granted permissions are retained in case of a self-subscribe functionality failure for a data source.
Source§impl DeleteDataSourceOutput
impl DeleteDataSourceOutput
Sourcepub fn builder() -> DeleteDataSourceOutputBuilder
pub fn builder() -> DeleteDataSourceOutputBuilder
Creates a new builder-style object to manufacture DeleteDataSourceOutput.
Trait Implementations§
Source§impl Clone for DeleteDataSourceOutput
impl Clone for DeleteDataSourceOutput
Source§fn clone(&self) -> DeleteDataSourceOutput
fn clone(&self) -> DeleteDataSourceOutput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for DeleteDataSourceOutput
impl Debug for DeleteDataSourceOutput
Source§impl PartialEq for DeleteDataSourceOutput
impl PartialEq for DeleteDataSourceOutput
Source§impl RequestId for DeleteDataSourceOutput
impl RequestId for DeleteDataSourceOutput
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None if the service could not be reached.impl StructuralPartialEq for DeleteDataSourceOutput
Auto Trait Implementations§
impl Freeze for DeleteDataSourceOutput
impl RefUnwindSafe for DeleteDataSourceOutput
impl Send for DeleteDataSourceOutput
impl Sync for DeleteDataSourceOutput
impl Unpin for DeleteDataSourceOutput
impl UnwindSafe for DeleteDataSourceOutput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);