pub struct ListJobRunsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ListJobRuns.
Lists job runs.
Implementations§
Source§impl ListJobRunsFluentBuilder
impl ListJobRunsFluentBuilder
Sourcepub fn as_input(&self) -> &ListJobRunsInputBuilder
pub fn as_input(&self) -> &ListJobRunsInputBuilder
Access the ListJobRuns as a reference.
Sourcepub async fn send(
self,
) -> Result<ListJobRunsOutput, SdkError<ListJobRunsError, HttpResponse>>
pub async fn send( self, ) -> Result<ListJobRunsOutput, SdkError<ListJobRunsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ListJobRunsOutput, ListJobRunsError, Self>
pub fn customize( self, ) -> CustomizableOperation<ListJobRunsOutput, ListJobRunsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> ListJobRunsPaginator
pub fn into_paginator(self) -> ListJobRunsPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn domain_identifier(self, input: impl Into<String>) -> Self
pub fn domain_identifier(self, input: impl Into<String>) -> Self
The ID of the domain where you want to list job runs.
Sourcepub fn set_domain_identifier(self, input: Option<String>) -> Self
pub fn set_domain_identifier(self, input: Option<String>) -> Self
The ID of the domain where you want to list job runs.
Sourcepub fn get_domain_identifier(&self) -> &Option<String>
pub fn get_domain_identifier(&self) -> &Option<String>
The ID of the domain where you want to list job runs.
Sourcepub fn job_identifier(self, input: impl Into<String>) -> Self
pub fn job_identifier(self, input: impl Into<String>) -> Self
The ID of the job run.
Sourcepub fn set_job_identifier(self, input: Option<String>) -> Self
pub fn set_job_identifier(self, input: Option<String>) -> Self
The ID of the job run.
Sourcepub fn get_job_identifier(&self) -> &Option<String>
pub fn get_job_identifier(&self) -> &Option<String>
The ID of the job run.
Sourcepub fn status(self, input: JobRunStatus) -> Self
pub fn status(self, input: JobRunStatus) -> Self
The status of a job run.
Sourcepub fn set_status(self, input: Option<JobRunStatus>) -> Self
pub fn set_status(self, input: Option<JobRunStatus>) -> Self
The status of a job run.
Sourcepub fn get_status(&self) -> &Option<JobRunStatus>
pub fn get_status(&self) -> &Option<JobRunStatus>
The status of a job run.
Sourcepub fn sort_order(self, input: SortOrder) -> Self
pub fn sort_order(self, input: SortOrder) -> Self
Specifies the order in which job runs are to be sorted.
Sourcepub fn set_sort_order(self, input: Option<SortOrder>) -> Self
pub fn set_sort_order(self, input: Option<SortOrder>) -> Self
Specifies the order in which job runs are to be sorted.
Sourcepub fn get_sort_order(&self) -> &Option<SortOrder>
pub fn get_sort_order(&self) -> &Option<SortOrder>
Specifies the order in which job runs are to be sorted.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
When the number of job runs is greater than the default value for the MaxResults parameter, or if you explicitly specify a value for MaxResults that is less than the number of job runs, the response includes a pagination token named NextToken. You can specify this NextToken value in a subsequent call to ListJobRuns to list the next set of job runs.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
When the number of job runs is greater than the default value for the MaxResults parameter, or if you explicitly specify a value for MaxResults that is less than the number of job runs, the response includes a pagination token named NextToken. You can specify this NextToken value in a subsequent call to ListJobRuns to list the next set of job runs.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
When the number of job runs is greater than the default value for the MaxResults parameter, or if you explicitly specify a value for MaxResults that is less than the number of job runs, the response includes a pagination token named NextToken. You can specify this NextToken value in a subsequent call to ListJobRuns to list the next set of job runs.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of job runs to return in a single call to ListJobRuns. When the number of job runs to be listed is greater than the value of MaxResults, the response contains a NextToken value that you can use in a subsequent call to ListJobRuns to list the next set of job runs.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of job runs to return in a single call to ListJobRuns. When the number of job runs to be listed is greater than the value of MaxResults, the response contains a NextToken value that you can use in a subsequent call to ListJobRuns to list the next set of job runs.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of job runs to return in a single call to ListJobRuns. When the number of job runs to be listed is greater than the value of MaxResults, the response contains a NextToken value that you can use in a subsequent call to ListJobRuns to list the next set of job runs.
Trait Implementations§
Source§impl Clone for ListJobRunsFluentBuilder
impl Clone for ListJobRunsFluentBuilder
Source§fn clone(&self) -> ListJobRunsFluentBuilder
fn clone(&self) -> ListJobRunsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ListJobRunsFluentBuilder
impl !RefUnwindSafe for ListJobRunsFluentBuilder
impl Send for ListJobRunsFluentBuilder
impl Sync for ListJobRunsFluentBuilder
impl Unpin for ListJobRunsFluentBuilder
impl !UnwindSafe for ListJobRunsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);