Enum Error

#[non_exhaustive]
pub enum Error {
    ClusterAlreadyExistsFault(ClusterAlreadyExistsFault),
    ClusterNotFoundFault(ClusterNotFoundFault),
    ClusterQuotaForCustomerExceededFault(ClusterQuotaForCustomerExceededFault),
    InsufficientClusterCapacityFault(InsufficientClusterCapacityFault),
    InvalidArnFault(InvalidArnFault),
    InvalidClusterStateFault(InvalidClusterStateFault),
    InvalidParameterCombinationException(InvalidParameterCombinationException),
    InvalidParameterGroupStateFault(InvalidParameterGroupStateFault),
    InvalidParameterValueException(InvalidParameterValueException),
    InvalidSubnet(InvalidSubnet),
    InvalidVpcNetworkStateFault(InvalidVpcNetworkStateFault),
    NodeNotFoundFault(NodeNotFoundFault),
    NodeQuotaForClusterExceededFault(NodeQuotaForClusterExceededFault),
    NodeQuotaForCustomerExceededFault(NodeQuotaForCustomerExceededFault),
    ParameterGroupAlreadyExistsFault(ParameterGroupAlreadyExistsFault),
    ParameterGroupNotFoundFault(ParameterGroupNotFoundFault),
    ParameterGroupQuotaExceededFault(ParameterGroupQuotaExceededFault),
    ServiceLinkedRoleNotFoundFault(ServiceLinkedRoleNotFoundFault),
    ServiceQuotaExceededException(ServiceQuotaExceededException),
    SubnetGroupAlreadyExistsFault(SubnetGroupAlreadyExistsFault),
    SubnetGroupInUseFault(SubnetGroupInUseFault),
    SubnetGroupNotFoundFault(SubnetGroupNotFoundFault),
    SubnetGroupQuotaExceededFault(SubnetGroupQuotaExceededFault),
    SubnetInUse(SubnetInUse),
    SubnetQuotaExceededFault(SubnetQuotaExceededFault),
    TagNotFoundFault(TagNotFoundFault),
    TagQuotaPerResourceExceeded(TagQuotaPerResourceExceeded),
    Unhandled(Unhandled),
}

All possible error types for this service.

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

ClusterAlreadyExistsFault(ClusterAlreadyExistsFault)

You already have a DAX cluster with the given identifier.

ClusterNotFoundFault(ClusterNotFoundFault)

The requested cluster ID does not refer to an existing DAX cluster.

ClusterQuotaForCustomerExceededFault(ClusterQuotaForCustomerExceededFault)

You have attempted to exceed the maximum number of DAX clusters for your AWS account.

InsufficientClusterCapacityFault(InsufficientClusterCapacityFault)

There are not enough system resources to create the cluster you requested (or to resize an already-existing cluster).

InvalidArnFault(InvalidArnFault)

The Amazon Resource Name (ARN) supplied in the request is not valid.

InvalidClusterStateFault(InvalidClusterStateFault)

The requested DAX cluster is not in the available state.

InvalidParameterCombinationException(InvalidParameterCombinationException)

Two or more incompatible parameters were specified.

InvalidParameterGroupStateFault(InvalidParameterGroupStateFault)

One or more parameters in a parameter group are in an invalid state.

InvalidParameterValueException(InvalidParameterValueException)

The value for a parameter is invalid.

InvalidSubnet(InvalidSubnet)

An invalid subnet identifier was specified.

InvalidVpcNetworkStateFault(InvalidVpcNetworkStateFault)

The VPC network is in an invalid state.

NodeNotFoundFault(NodeNotFoundFault)

None of the nodes in the cluster have the given node ID.

NodeQuotaForClusterExceededFault(NodeQuotaForClusterExceededFault)

You have attempted to exceed the maximum number of nodes for a DAX cluster.

NodeQuotaForCustomerExceededFault(NodeQuotaForCustomerExceededFault)

You have attempted to exceed the maximum number of nodes for your AWS account.

ParameterGroupAlreadyExistsFault(ParameterGroupAlreadyExistsFault)

The specified parameter group already exists.

ParameterGroupNotFoundFault(ParameterGroupNotFoundFault)

The specified parameter group does not exist.

ParameterGroupQuotaExceededFault(ParameterGroupQuotaExceededFault)

You have attempted to exceed the maximum number of parameter groups.

ServiceLinkedRoleNotFoundFault(ServiceLinkedRoleNotFoundFault)

The specified service linked role (SLR) was not found.

ServiceQuotaExceededException(ServiceQuotaExceededException)

You have reached the maximum number of x509 certificates that can be created for encrypted clusters in a 30 day period. Contact AWS customer support to discuss options for continuing to create encrypted clusters.

SubnetGroupAlreadyExistsFault(SubnetGroupAlreadyExistsFault)

The specified subnet group already exists.

SubnetGroupInUseFault(SubnetGroupInUseFault)

The specified subnet group is currently in use.

SubnetGroupNotFoundFault(SubnetGroupNotFoundFault)

The requested subnet group name does not refer to an existing subnet group.

SubnetGroupQuotaExceededFault(SubnetGroupQuotaExceededFault)

The request cannot be processed because it would exceed the allowed number of subnets in a subnet group.

SubnetInUse(SubnetInUse)

The requested subnet is being used by another subnet group.

SubnetQuotaExceededFault(SubnetQuotaExceededFault)

The request cannot be processed because it would exceed the allowed number of subnets in a subnet group.

TagNotFoundFault(TagNotFoundFault)

The tag does not exist.

TagQuotaPerResourceExceeded(TagQuotaPerResourceExceeded)

You have exceeded the maximum number of tags for this DAX cluster.

Unhandled(Unhandled)

👎Deprecated: Matching Unhandled directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code():    err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ } See ProvideErrorMetadata for what information is available for the error.

An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).

Trait Implementations

impl Debug for Error

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Display for Error

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Error for Error

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any.

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)

Provides type-based access to context intended for error reports.

impl From<BuildError> for Error

fn from(value: BuildError) -> Self

Converts to this type from the input type.

impl From<CreateClusterError> for Error

fn from(err: CreateClusterError) -> Self

Converts to this type from the input type.

impl From<CreateParameterGroupError> for Error

fn from(err: CreateParameterGroupError) -> Self

Converts to this type from the input type.

impl From<CreateSubnetGroupError> for Error

fn from(err: CreateSubnetGroupError) -> Self

Converts to this type from the input type.

impl From<DecreaseReplicationFactorError> for Error

fn from(err: DecreaseReplicationFactorError) -> Self

Converts to this type from the input type.

impl From<DeleteClusterError> for Error

fn from(err: DeleteClusterError) -> Self

Converts to this type from the input type.

impl From<DeleteParameterGroupError> for Error

fn from(err: DeleteParameterGroupError) -> Self

Converts to this type from the input type.

impl From<DeleteSubnetGroupError> for Error

fn from(err: DeleteSubnetGroupError) -> Self

Converts to this type from the input type.

impl From<DescribeClustersError> for Error

fn from(err: DescribeClustersError) -> Self

Converts to this type from the input type.

impl From<DescribeDefaultParametersError> for Error

fn from(err: DescribeDefaultParametersError) -> Self

Converts to this type from the input type.

impl From<DescribeEventsError> for Error

fn from(err: DescribeEventsError) -> Self

Converts to this type from the input type.

impl From<DescribeParameterGroupsError> for Error

fn from(err: DescribeParameterGroupsError) -> Self

Converts to this type from the input type.

impl From<DescribeParametersError> for Error

fn from(err: DescribeParametersError) -> Self

Converts to this type from the input type.

impl From<DescribeSubnetGroupsError> for Error

fn from(err: DescribeSubnetGroupsError) -> Self

Converts to this type from the input type.

impl From<IncreaseReplicationFactorError> for Error

fn from(err: IncreaseReplicationFactorError) -> Self

Converts to this type from the input type.

impl From<ListTagsError> for Error

fn from(err: ListTagsError) -> Self

Converts to this type from the input type.

impl From<RebootNodeError> for Error

fn from(err: RebootNodeError) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<CreateClusterError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<CreateClusterError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<CreateParameterGroupError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<CreateParameterGroupError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<CreateSubnetGroupError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<CreateSubnetGroupError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DecreaseReplicationFactorError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DecreaseReplicationFactorError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DeleteClusterError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DeleteClusterError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DeleteParameterGroupError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DeleteParameterGroupError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DeleteSubnetGroupError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DeleteSubnetGroupError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DescribeClustersError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DescribeClustersError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DescribeDefaultParametersError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DescribeDefaultParametersError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DescribeEventsError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DescribeEventsError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DescribeParameterGroupsError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DescribeParameterGroupsError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DescribeParametersError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DescribeParametersError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<DescribeSubnetGroupsError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<DescribeSubnetGroupsError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<IncreaseReplicationFactorError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<IncreaseReplicationFactorError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<ListTagsError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<ListTagsError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<RebootNodeError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<RebootNodeError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<TagResourceError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<TagResourceError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<UntagResourceError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<UntagResourceError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<UpdateClusterError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<UpdateClusterError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<UpdateParameterGroupError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<UpdateParameterGroupError, R>) -> Self

Converts to this type from the input type.

impl<R> From<SdkError<UpdateSubnetGroupError, R>> for Error

where R: Send + Sync + Debug + 'static,

fn from(err: SdkError<UpdateSubnetGroupError, R>) -> Self

Converts to this type from the input type.

impl From<TagResourceError> for Error

fn from(err: TagResourceError) -> Self

Converts to this type from the input type.

impl From<UntagResourceError> for Error

fn from(err: UntagResourceError) -> Self

Converts to this type from the input type.

impl From<UpdateClusterError> for Error

fn from(err: UpdateClusterError) -> Self

Converts to this type from the input type.

impl From<UpdateParameterGroupError> for Error

fn from(err: UpdateParameterGroupError) -> Self

Converts to this type from the input type.

impl From<UpdateSubnetGroupError> for Error

fn from(err: UpdateSubnetGroupError) -> Self

Converts to this type from the input type.

impl ProvideErrorMetadata for Error

fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.

fn code(&self) -> Option<&str>

Returns the error code if it’s available.

fn message(&self) -> Option<&str>

Returns the error message, if there is one.

impl RequestId for Error

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.