#[non_exhaustive]pub struct NetworkProfile {
pub arn: Option<String>,
pub name: Option<String>,
pub description: Option<String>,
pub type: Option<NetworkProfileType>,
pub uplink_bandwidth_bits: Option<i64>,
pub downlink_bandwidth_bits: Option<i64>,
pub uplink_delay_ms: Option<i64>,
pub downlink_delay_ms: Option<i64>,
pub uplink_jitter_ms: Option<i64>,
pub downlink_jitter_ms: Option<i64>,
pub uplink_loss_percent: i32,
pub downlink_loss_percent: i32,
}Expand description
An array of settings that describes characteristics of a network profile.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.arn: Option<String>The Amazon Resource Name (ARN) of the network profile.
name: Option<String>The name of the network profile.
description: Option<String>The description of the network profile.
type: Option<NetworkProfileType>The type of network profile. Valid values are listed here.
uplink_bandwidth_bits: Option<i64>The data throughput rate in bits per second, as an integer from 0 to 104857600.
downlink_bandwidth_bits: Option<i64>The data throughput rate in bits per second, as an integer from 0 to 104857600.
uplink_delay_ms: Option<i64>Delay time for all packets to destination in milliseconds as an integer from 0 to 2000.
downlink_delay_ms: Option<i64>Delay time for all packets to destination in milliseconds as an integer from 0 to 2000.
uplink_jitter_ms: Option<i64>Time variation in the delay of received packets in milliseconds as an integer from 0 to 2000.
downlink_jitter_ms: Option<i64>Time variation in the delay of received packets in milliseconds as an integer from 0 to 2000.
uplink_loss_percent: i32Proportion of transmitted packets that fail to arrive from 0 to 100 percent.
downlink_loss_percent: i32Proportion of received packets that fail to arrive from 0 to 100 percent.
Implementations§
Source§impl NetworkProfile
impl NetworkProfile
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
The description of the network profile.
Sourcepub fn type(&self) -> Option<&NetworkProfileType>
pub fn type(&self) -> Option<&NetworkProfileType>
The type of network profile. Valid values are listed here.
Sourcepub fn uplink_bandwidth_bits(&self) -> Option<i64>
pub fn uplink_bandwidth_bits(&self) -> Option<i64>
The data throughput rate in bits per second, as an integer from 0 to 104857600.
Sourcepub fn downlink_bandwidth_bits(&self) -> Option<i64>
pub fn downlink_bandwidth_bits(&self) -> Option<i64>
The data throughput rate in bits per second, as an integer from 0 to 104857600.
Sourcepub fn uplink_delay_ms(&self) -> Option<i64>
pub fn uplink_delay_ms(&self) -> Option<i64>
Delay time for all packets to destination in milliseconds as an integer from 0 to 2000.
Sourcepub fn downlink_delay_ms(&self) -> Option<i64>
pub fn downlink_delay_ms(&self) -> Option<i64>
Delay time for all packets to destination in milliseconds as an integer from 0 to 2000.
Sourcepub fn uplink_jitter_ms(&self) -> Option<i64>
pub fn uplink_jitter_ms(&self) -> Option<i64>
Time variation in the delay of received packets in milliseconds as an integer from 0 to 2000.
Sourcepub fn downlink_jitter_ms(&self) -> Option<i64>
pub fn downlink_jitter_ms(&self) -> Option<i64>
Time variation in the delay of received packets in milliseconds as an integer from 0 to 2000.
Sourcepub fn uplink_loss_percent(&self) -> i32
pub fn uplink_loss_percent(&self) -> i32
Proportion of transmitted packets that fail to arrive from 0 to 100 percent.
Sourcepub fn downlink_loss_percent(&self) -> i32
pub fn downlink_loss_percent(&self) -> i32
Proportion of received packets that fail to arrive from 0 to 100 percent.
Source§impl NetworkProfile
impl NetworkProfile
Sourcepub fn builder() -> NetworkProfileBuilder
pub fn builder() -> NetworkProfileBuilder
Creates a new builder-style object to manufacture NetworkProfile.
Trait Implementations§
Source§impl Clone for NetworkProfile
impl Clone for NetworkProfile
Source§fn clone(&self) -> NetworkProfile
fn clone(&self) -> NetworkProfile
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for NetworkProfile
impl Debug for NetworkProfile
Source§impl PartialEq for NetworkProfile
impl PartialEq for NetworkProfile
impl StructuralPartialEq for NetworkProfile
Auto Trait Implementations§
impl Freeze for NetworkProfile
impl RefUnwindSafe for NetworkProfile
impl Send for NetworkProfile
impl Sync for NetworkProfile
impl Unpin for NetworkProfile
impl UnwindSafe for NetworkProfile
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);