Struct aws_sdk_kms::operation::re_encrypt::builders::ReEncryptInputBuilder

#[non_exhaustive]
pub struct ReEncryptInputBuilder { /* private fields */ }

A builder for ReEncryptInput.

Implementations

impl ReEncryptInputBuilder

pub fn ciphertext_blob(self, input: Blob) -> Self

Ciphertext of the data to reencrypt.

This field is required.

pub fn set_ciphertext_blob(self, input: Option<Blob>) -> Self

Ciphertext of the data to reencrypt.

pub fn get_ciphertext_blob(&self) -> &Option<Blob>

Ciphertext of the data to reencrypt.

pub fn source_encryption_context( self, k: impl Into<String>, v: impl Into<String> ) -> Self

Adds a key-value pair to source_encryption_context.

To override the contents of this collection use set_source_encryption_context.

Specifies the encryption context to use to decrypt the ciphertext. Enter the same encryption context that was used to encrypt the ciphertext.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn set_source_encryption_context( self, input: Option<HashMap<String, String>> ) -> Self

Specifies the encryption context to use to decrypt the ciphertext. Enter the same encryption context that was used to encrypt the ciphertext.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn get_source_encryption_context(&self) -> &Option<HashMap<String, String>>

Specifies the encryption context to use to decrypt the ciphertext. Enter the same encryption context that was used to encrypt the ciphertext.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn source_key_id(self, input: impl Into<String>) -> Self

Specifies the KMS key that KMS will use to decrypt the ciphertext before it is re-encrypted.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the ReEncrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn set_source_key_id(self, input: Option<String>) -> Self

Specifies the KMS key that KMS will use to decrypt the ciphertext before it is re-encrypted.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the ReEncrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn get_source_key_id(&self) -> &Option<String>

Specifies the KMS key that KMS will use to decrypt the ciphertext before it is re-encrypted.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the ReEncrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn destination_key_id(self, input: impl Into<String>) -> Self

A unique identifier for the KMS key that is used to reencrypt the data. Specify a symmetric encryption KMS key or an asymmetric KMS key with a KeyUsage value of ENCRYPT_DECRYPT. To find the KeyUsage value of a KMS key, use the DescribeKey operation.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

This field is required.

pub fn set_destination_key_id(self, input: Option<String>) -> Self

A unique identifier for the KMS key that is used to reencrypt the data. Specify a symmetric encryption KMS key or an asymmetric KMS key with a KeyUsage value of ENCRYPT_DECRYPT. To find the KeyUsage value of a KMS key, use the DescribeKey operation.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn get_destination_key_id(&self) -> &Option<String>

A unique identifier for the KMS key that is used to reencrypt the data. Specify a symmetric encryption KMS key or an asymmetric KMS key with a KeyUsage value of ENCRYPT_DECRYPT. To find the KeyUsage value of a KMS key, use the DescribeKey operation.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

• Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

• Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

• Alias name: alias/ExampleAlias

• Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

pub fn destination_encryption_context( self, k: impl Into<String>, v: impl Into<String> ) -> Self

Adds a key-value pair to destination_encryption_context.

To override the contents of this collection use set_destination_encryption_context.

Specifies that encryption context to use when the reencrypting the data.

Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.

A destination encryption context is valid only when the destination KMS key is a symmetric encryption KMS key. The standard ciphertext format for asymmetric KMS keys does not include fields for metadata.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn set_destination_encryption_context( self, input: Option<HashMap<String, String>> ) -> Self

Specifies that encryption context to use when the reencrypting the data.

Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.

A destination encryption context is valid only when the destination KMS key is a symmetric encryption KMS key. The standard ciphertext format for asymmetric KMS keys does not include fields for metadata.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn get_destination_encryption_context( &self ) -> &Option<HashMap<String, String>>

Specifies that encryption context to use when the reencrypting the data.

Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.

A destination encryption context is valid only when the destination KMS key is a symmetric encryption KMS key. The standard ciphertext format for asymmetric KMS keys does not include fields for metadata.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

pub fn source_encryption_algorithm(self, input: EncryptionAlgorithmSpec) -> Self

Specifies the encryption algorithm that KMS will use to decrypt the ciphertext before it is reencrypted. The default value, SYMMETRIC_DEFAULT, represents the algorithm used for symmetric encryption KMS keys.

Specify the same algorithm that was used to encrypt the ciphertext. If you specify a different algorithm, the decrypt attempt fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key.

pub fn set_source_encryption_algorithm( self, input: Option<EncryptionAlgorithmSpec> ) -> Self

Specifies the encryption algorithm that KMS will use to decrypt the ciphertext before it is reencrypted. The default value, SYMMETRIC_DEFAULT, represents the algorithm used for symmetric encryption KMS keys.

Specify the same algorithm that was used to encrypt the ciphertext. If you specify a different algorithm, the decrypt attempt fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key.

pub fn get_source_encryption_algorithm( &self ) -> &Option<EncryptionAlgorithmSpec>

Specifies the encryption algorithm that KMS will use to decrypt the ciphertext before it is reencrypted. The default value, SYMMETRIC_DEFAULT, represents the algorithm used for symmetric encryption KMS keys.

Specify the same algorithm that was used to encrypt the ciphertext. If you specify a different algorithm, the decrypt attempt fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key.

pub fn destination_encryption_algorithm( self, input: EncryptionAlgorithmSpec ) -> Self

Specifies the encryption algorithm that KMS will use to reecrypt the data after it has decrypted it. The default value, SYMMETRIC_DEFAULT, represents the encryption algorithm used for symmetric encryption KMS keys.

This parameter is required only when the destination KMS key is an asymmetric KMS key.

pub fn set_destination_encryption_algorithm( self, input: Option<EncryptionAlgorithmSpec> ) -> Self

Specifies the encryption algorithm that KMS will use to reecrypt the data after it has decrypted it. The default value, SYMMETRIC_DEFAULT, represents the encryption algorithm used for symmetric encryption KMS keys.

This parameter is required only when the destination KMS key is an asymmetric KMS key.

pub fn get_destination_encryption_algorithm( &self ) -> &Option<EncryptionAlgorithmSpec>

Specifies the encryption algorithm that KMS will use to reecrypt the data after it has decrypted it. The default value, SYMMETRIC_DEFAULT, represents the encryption algorithm used for symmetric encryption KMS keys.

This parameter is required only when the destination KMS key is an asymmetric KMS key.

pub fn grant_tokens(self, input: impl Into<String>) -> Self

Appends an item to grant_tokens.

To override the contents of this collection use set_grant_tokens.

A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

pub fn set_grant_tokens(self, input: Option<Vec<String>>) -> Self

A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

pub fn get_grant_tokens(&self) -> &Option<Vec<String>>

A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

pub fn dry_run(self, input: bool) -> Self

Checks if your request will succeed. DryRun is an optional parameter.

To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks if your request will succeed. DryRun is an optional parameter.

To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.

pub fn get_dry_run(&self) -> &Option<bool>

Checks if your request will succeed. DryRun is an optional parameter.

To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.

pub fn build(self) -> Result<ReEncryptInput, BuildError>

Consumes the builder and constructs a ReEncryptInput.

impl ReEncryptInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<ReEncryptOutput, SdkError<ReEncryptError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for ReEncryptInputBuilder

fn clone(&self) -> ReEncryptInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ReEncryptInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ReEncryptInputBuilder

fn default() -> ReEncryptInputBuilder

Returns the “default value” for a type.

impl PartialEq for ReEncryptInputBuilder

fn eq(&self, other: &ReEncryptInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for ReEncryptInputBuilder