#[non_exhaustive]pub enum EnableKeyRotationError {
DependencyTimeoutException(DependencyTimeoutException),
DisabledException(DisabledException),
InvalidArnException(InvalidArnException),
KmsInternalException(KmsInternalException),
KmsInvalidStateException(KmsInvalidStateException),
NotFoundException(NotFoundException),
UnsupportedOperationException(UnsupportedOperationException),
Unhandled(Unhandled),
}
Expand description
Error type for the EnableKeyRotationError
operation.
Variants (Non-exhaustive)§
This enum is marked as non-exhaustive
DependencyTimeoutException(DependencyTimeoutException)
The system timed out while trying to fulfill the request. You can retry the request.
DisabledException(DisabledException)
The request was rejected because the specified KMS key is not enabled.
InvalidArnException(InvalidArnException)
The request was rejected because a specified ARN, or an ARN in a key policy, is not valid.
KmsInternalException(KmsInternalException)
The request was rejected because an internal exception occurred. The request can be retried.
KmsInvalidStateException(KmsInvalidStateException)
The request was rejected because the state of the specified resource is not valid for this request.
This exceptions means one of the following:
-
The key state of the KMS key is not compatible with the operation.
To find the key state, use the
DescribeKey
operation. For more information about which key states are compatible with each KMS operation, see Key states of KMS keys in the Key Management Service Developer Guide . -
For cryptographic operations on KMS keys in custom key stores, this exception represents a general failure with many possible causes. To identify the cause, see the error message that accompanies the exception.
NotFoundException(NotFoundException)
The request was rejected because the specified entity or resource could not be found.
UnsupportedOperationException(UnsupportedOperationException)
The request was rejected because a specified parameter is not supported or a specified resource is not valid for this operation.
Unhandled(Unhandled)
Unhandled
directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code()
:
err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ }
See ProvideErrorMetadata
for what information is available for the error.An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
Implementations§
Source§impl EnableKeyRotationError
impl EnableKeyRotationError
Sourcepub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self
Creates the EnableKeyRotationError::Unhandled
variant from any error type.
Sourcepub fn generic(err: ErrorMetadata) -> Self
pub fn generic(err: ErrorMetadata) -> Self
Creates the EnableKeyRotationError::Unhandled
variant from an ErrorMetadata
.
Sourcepub fn meta(&self) -> &ErrorMetadata
pub fn meta(&self) -> &ErrorMetadata
Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
Sourcepub fn is_dependency_timeout_exception(&self) -> bool
pub fn is_dependency_timeout_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::DependencyTimeoutException
.
Sourcepub fn is_disabled_exception(&self) -> bool
pub fn is_disabled_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::DisabledException
.
Sourcepub fn is_invalid_arn_exception(&self) -> bool
pub fn is_invalid_arn_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::InvalidArnException
.
Sourcepub fn is_kms_internal_exception(&self) -> bool
pub fn is_kms_internal_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::KmsInternalException
.
Sourcepub fn is_kms_invalid_state_exception(&self) -> bool
pub fn is_kms_invalid_state_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::KmsInvalidStateException
.
Sourcepub fn is_not_found_exception(&self) -> bool
pub fn is_not_found_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::NotFoundException
.
Sourcepub fn is_unsupported_operation_exception(&self) -> bool
pub fn is_unsupported_operation_exception(&self) -> bool
Returns true
if the error kind is EnableKeyRotationError::UnsupportedOperationException
.
Trait Implementations§
Source§impl CreateUnhandledError for EnableKeyRotationError
impl CreateUnhandledError for EnableKeyRotationError
Source§fn create_unhandled_error(
source: Box<dyn Error + Send + Sync + 'static>,
meta: Option<ErrorMetadata>,
) -> Self
fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata>, ) -> Self
source
and error metadata.Source§impl Debug for EnableKeyRotationError
impl Debug for EnableKeyRotationError
Source§impl Display for EnableKeyRotationError
impl Display for EnableKeyRotationError
Source§impl Error for EnableKeyRotationError
impl Error for EnableKeyRotationError
Source§fn source(&self) -> Option<&(dyn Error + 'static)>
fn source(&self) -> Option<&(dyn Error + 'static)>
1.0.0 · Source§fn description(&self) -> &str
fn description(&self) -> &str
Source§impl From<EnableKeyRotationError> for Error
impl From<EnableKeyRotationError> for Error
Source§fn from(err: EnableKeyRotationError) -> Self
fn from(err: EnableKeyRotationError) -> Self
Source§impl ProvideErrorMetadata for EnableKeyRotationError
impl ProvideErrorMetadata for EnableKeyRotationError
Source§fn meta(&self) -> &ErrorMetadata
fn meta(&self) -> &ErrorMetadata
Source§impl RequestId for EnableKeyRotationError
impl RequestId for EnableKeyRotationError
Source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None
if the service could not be reached.Auto Trait Implementations§
impl Freeze for EnableKeyRotationError
impl !RefUnwindSafe for EnableKeyRotationError
impl Send for EnableKeyRotationError
impl Sync for EnableKeyRotationError
impl Unpin for EnableKeyRotationError
impl !UnwindSafe for EnableKeyRotationError
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.bright_black());
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.bright_green());
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.bright_yellow());
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.bright_magenta());
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self
with the
fg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.bright_white());
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlack
.
§Example
println!("{}", value.on_bright_black());
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightGreen
.
§Example
println!("{}", value.on_bright_green());
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightYellow
.
§Example
println!("{}", value.on_bright_yellow());
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightBlue
.
§Example
println!("{}", value.on_bright_blue());
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightMagenta
.
§Example
println!("{}", value.on_bright_magenta());
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightCyan
.
§Example
println!("{}", value.on_bright_cyan());
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self
with the
bg()
set to
Color::BrightWhite
.
§Example
println!("{}", value.on_bright_white());
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::Underline
.
§Example
println!("{}", value.underline());
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self
with the
attr()
set to
Attribute::RapidBlink
.
§Example
println!("{}", value.rapid_blink());
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);