pub struct VerifyMacFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to VerifyMac.
Verifies the hash-based message authentication code (HMAC) for a specified message, HMAC KMS key, and MAC algorithm. To verify the HMAC, VerifyMac computes an HMAC using the message, HMAC KMS key, and MAC algorithm that you specify, and compares the computed HMAC to the HMAC that you specify. If the HMACs are identical, the verification succeeds; otherwise, it fails. Verification indicates that the message hasn't changed since the HMAC was calculated, and the specified key was used to generate and verify the HMAC.
HMAC KMS keys and the HMAC algorithms that KMS uses conform to industry standards defined in RFC 2104.
This operation is part of KMS support for HMAC KMS keys. For details, see HMAC keys in KMS in the Key Management Service Developer Guide.
The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.
Cross-account use: Yes. To perform this operation with a KMS key in a different Amazon Web Services account, specify the key ARN or alias ARN in the value of the KeyId parameter.
Required permissions: kms:VerifyMac (key policy)
Related operations: GenerateMac
Eventual consistency: The KMS API follows an eventual consistency model. For more information, see KMS eventual consistency.
Implementations§
Source§impl VerifyMacFluentBuilder
impl VerifyMacFluentBuilder
Sourcepub fn as_input(&self) -> &VerifyMacInputBuilder
pub fn as_input(&self) -> &VerifyMacInputBuilder
Access the VerifyMac as a reference.
Sourcepub async fn send(
self,
) -> Result<VerifyMacOutput, SdkError<VerifyMacError, HttpResponse>>
pub async fn send( self, ) -> Result<VerifyMacOutput, SdkError<VerifyMacError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<VerifyMacOutput, VerifyMacError, Self>
pub fn customize( self, ) -> CustomizableOperation<VerifyMacOutput, VerifyMacError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn message(self, input: Blob) -> Self
pub fn message(self, input: Blob) -> Self
The message that will be used in the verification. Enter the same message that was used to generate the HMAC.
GenerateMac and VerifyMac do not provide special handling for message digests. If you generated an HMAC for a hash digest of a message, you must verify the HMAC for the same hash digest.
Sourcepub fn set_message(self, input: Option<Blob>) -> Self
pub fn set_message(self, input: Option<Blob>) -> Self
The message that will be used in the verification. Enter the same message that was used to generate the HMAC.
GenerateMac and VerifyMac do not provide special handling for message digests. If you generated an HMAC for a hash digest of a message, you must verify the HMAC for the same hash digest.
Sourcepub fn get_message(&self) -> &Option<Blob>
pub fn get_message(&self) -> &Option<Blob>
The message that will be used in the verification. Enter the same message that was used to generate the HMAC.
GenerateMac and VerifyMac do not provide special handling for message digests. If you generated an HMAC for a hash digest of a message, you must verify the HMAC for the same hash digest.
Sourcepub fn key_id(self, input: impl Into<String>) -> Self
pub fn key_id(self, input: impl Into<String>) -> Self
The KMS key that will be used in the verification.
Enter a key ID of the KMS key that was used to generate the HMAC. If you identify a different KMS key, the VerifyMac operation fails.
Sourcepub fn set_key_id(self, input: Option<String>) -> Self
pub fn set_key_id(self, input: Option<String>) -> Self
The KMS key that will be used in the verification.
Enter a key ID of the KMS key that was used to generate the HMAC. If you identify a different KMS key, the VerifyMac operation fails.
Sourcepub fn get_key_id(&self) -> &Option<String>
pub fn get_key_id(&self) -> &Option<String>
The KMS key that will be used in the verification.
Enter a key ID of the KMS key that was used to generate the HMAC. If you identify a different KMS key, the VerifyMac operation fails.
Sourcepub fn mac_algorithm(self, input: MacAlgorithmSpec) -> Self
pub fn mac_algorithm(self, input: MacAlgorithmSpec) -> Self
The MAC algorithm that will be used in the verification. Enter the same MAC algorithm that was used to compute the HMAC. This algorithm must be supported by the HMAC KMS key identified by the KeyId parameter.
Sourcepub fn set_mac_algorithm(self, input: Option<MacAlgorithmSpec>) -> Self
pub fn set_mac_algorithm(self, input: Option<MacAlgorithmSpec>) -> Self
The MAC algorithm that will be used in the verification. Enter the same MAC algorithm that was used to compute the HMAC. This algorithm must be supported by the HMAC KMS key identified by the KeyId parameter.
Sourcepub fn get_mac_algorithm(&self) -> &Option<MacAlgorithmSpec>
pub fn get_mac_algorithm(&self) -> &Option<MacAlgorithmSpec>
The MAC algorithm that will be used in the verification. Enter the same MAC algorithm that was used to compute the HMAC. This algorithm must be supported by the HMAC KMS key identified by the KeyId parameter.
Sourcepub fn mac(self, input: Blob) -> Self
pub fn mac(self, input: Blob) -> Self
The HMAC to verify. Enter the HMAC that was generated by the GenerateMac operation when you specified the same message, HMAC KMS key, and MAC algorithm as the values specified in this request.
Sourcepub fn set_mac(self, input: Option<Blob>) -> Self
pub fn set_mac(self, input: Option<Blob>) -> Self
The HMAC to verify. Enter the HMAC that was generated by the GenerateMac operation when you specified the same message, HMAC KMS key, and MAC algorithm as the values specified in this request.
Sourcepub fn get_mac(&self) -> &Option<Blob>
pub fn get_mac(&self) -> &Option<Blob>
The HMAC to verify. Enter the HMAC that was generated by the GenerateMac operation when you specified the same message, HMAC KMS key, and MAC algorithm as the values specified in this request.
Sourcepub fn grant_tokens(self, input: impl Into<String>) -> Self
pub fn grant_tokens(self, input: impl Into<String>) -> Self
Appends an item to GrantTokens.
To override the contents of this collection use set_grant_tokens.
A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
Sourcepub fn set_grant_tokens(self, input: Option<Vec<String>>) -> Self
pub fn set_grant_tokens(self, input: Option<Vec<String>>) -> Self
A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
Sourcepub fn get_grant_tokens(&self) -> &Option<Vec<String>>
pub fn get_grant_tokens(&self) -> &Option<Vec<String>>
A list of grant tokens.
Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks if your request will succeed. DryRun is an optional parameter.
To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks if your request will succeed. DryRun is an optional parameter.
To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks if your request will succeed. DryRun is an optional parameter.
To learn more about how to use this parameter, see Testing your KMS API calls in the Key Management Service Developer Guide.
Trait Implementations§
Source§impl Clone for VerifyMacFluentBuilder
impl Clone for VerifyMacFluentBuilder
Source§fn clone(&self) -> VerifyMacFluentBuilder
fn clone(&self) -> VerifyMacFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for VerifyMacFluentBuilder
impl !RefUnwindSafe for VerifyMacFluentBuilder
impl Send for VerifyMacFluentBuilder
impl Sync for VerifyMacFluentBuilder
impl Unpin for VerifyMacFluentBuilder
impl !UnwindSafe for VerifyMacFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);