pub struct DescribeCustomKeyStoresFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DescribeCustomKeyStores.
Gets information about custom key stores in the account and Region.
This operation is part of the custom key stores feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a key store that you own and manage.
By default, this operation returns information about all custom key stores in the account and Region. To get only information about a particular custom key store, use either the CustomKeyStoreName or CustomKeyStoreId parameter (but not both).
To determine whether the custom key store is connected to its CloudHSM cluster or external key store proxy, use the ConnectionState element in the response. If an attempt to connect the custom key store failed, the ConnectionState value is FAILED and the ConnectionErrorCode element in the response indicates the cause of the failure. For help interpreting the ConnectionErrorCode, see CustomKeyStoresListEntry.
Custom key stores have a DISCONNECTED connection state if the key store has never been connected or you used the DisconnectCustomKeyStore operation to disconnect it. Otherwise, the connection state is CONNECTED. If your custom key store connection state is CONNECTED but you are having trouble using it, verify that the backing store is active and available. For an CloudHSM key store, verify that the associated CloudHSM cluster is active and contains the minimum number of HSMs required for the operation, if any. For an external key store, verify that the external key store proxy and its associated external key manager are reachable and enabled.
For help repairing your CloudHSM key store, see the Troubleshooting CloudHSM key stores. For help repairing your external key store, see the Troubleshooting external key stores. Both topics are in the Key Management Service Developer Guide.
Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.
Required permissions: kms:DescribeCustomKeyStores (IAM policy)
Related operations:
-
ConnectCustomKeyStore -
CreateCustomKeyStore -
DeleteCustomKeyStore -
DisconnectCustomKeyStore -
UpdateCustomKeyStore
Eventual consistency: The KMS API follows an eventual consistency model. For more information, see KMS eventual consistency.
Implementations§
Source§impl DescribeCustomKeyStoresFluentBuilder
impl DescribeCustomKeyStoresFluentBuilder
Sourcepub fn as_input(&self) -> &DescribeCustomKeyStoresInputBuilder
pub fn as_input(&self) -> &DescribeCustomKeyStoresInputBuilder
Access the DescribeCustomKeyStores as a reference.
Sourcepub async fn send(
self,
) -> Result<DescribeCustomKeyStoresOutput, SdkError<DescribeCustomKeyStoresError, HttpResponse>>
pub async fn send( self, ) -> Result<DescribeCustomKeyStoresOutput, SdkError<DescribeCustomKeyStoresError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DescribeCustomKeyStoresOutput, DescribeCustomKeyStoresError, Self>
pub fn customize( self, ) -> CustomizableOperation<DescribeCustomKeyStoresOutput, DescribeCustomKeyStoresError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn into_paginator(self) -> DescribeCustomKeyStoresPaginator
pub fn into_paginator(self) -> DescribeCustomKeyStoresPaginator
Create a paginator for this request
Paginators are used by calling send().await which returns a PaginationStream.
Sourcepub fn custom_key_store_id(self, input: impl Into<String>) -> Self
pub fn custom_key_store_id(self, input: impl Into<String>) -> Self
Gets only information about the specified custom key store. Enter the key store ID.
By default, this operation gets information about all custom key stores in the account and Region. To limit the output to a particular custom key store, provide either the CustomKeyStoreId or CustomKeyStoreName parameter, but not both.
Sourcepub fn set_custom_key_store_id(self, input: Option<String>) -> Self
pub fn set_custom_key_store_id(self, input: Option<String>) -> Self
Gets only information about the specified custom key store. Enter the key store ID.
By default, this operation gets information about all custom key stores in the account and Region. To limit the output to a particular custom key store, provide either the CustomKeyStoreId or CustomKeyStoreName parameter, but not both.
Sourcepub fn get_custom_key_store_id(&self) -> &Option<String>
pub fn get_custom_key_store_id(&self) -> &Option<String>
Gets only information about the specified custom key store. Enter the key store ID.
By default, this operation gets information about all custom key stores in the account and Region. To limit the output to a particular custom key store, provide either the CustomKeyStoreId or CustomKeyStoreName parameter, but not both.
Sourcepub fn custom_key_store_name(self, input: impl Into<String>) -> Self
pub fn custom_key_store_name(self, input: impl Into<String>) -> Self
Gets only information about the specified custom key store. Enter the friendly name of the custom key store.
By default, this operation gets information about all custom key stores in the account and Region. To limit the output to a particular custom key store, provide either the CustomKeyStoreId or CustomKeyStoreName parameter, but not both.
Sourcepub fn set_custom_key_store_name(self, input: Option<String>) -> Self
pub fn set_custom_key_store_name(self, input: Option<String>) -> Self
Gets only information about the specified custom key store. Enter the friendly name of the custom key store.
By default, this operation gets information about all custom key stores in the account and Region. To limit the output to a particular custom key store, provide either the CustomKeyStoreId or CustomKeyStoreName parameter, but not both.
Sourcepub fn get_custom_key_store_name(&self) -> &Option<String>
pub fn get_custom_key_store_name(&self) -> &Option<String>
Gets only information about the specified custom key store. Enter the friendly name of the custom key store.
By default, this operation gets information about all custom key stores in the account and Region. To limit the output to a particular custom key store, provide either the CustomKeyStoreId or CustomKeyStoreName parameter, but not both.
Sourcepub fn limit(self, input: i32) -> Self
pub fn limit(self, input: i32) -> Self
Use this parameter to specify the maximum number of items to return. When this value is present, KMS does not return more than the specified number of items, but it might return fewer.
Sourcepub fn set_limit(self, input: Option<i32>) -> Self
pub fn set_limit(self, input: Option<i32>) -> Self
Use this parameter to specify the maximum number of items to return. When this value is present, KMS does not return more than the specified number of items, but it might return fewer.
Sourcepub fn get_limit(&self) -> &Option<i32>
pub fn get_limit(&self) -> &Option<i32>
Use this parameter to specify the maximum number of items to return. When this value is present, KMS does not return more than the specified number of items, but it might return fewer.
Sourcepub fn marker(self, input: impl Into<String>) -> Self
pub fn marker(self, input: impl Into<String>) -> Self
Use this parameter in a subsequent request after you receive a response with truncated results. Set it to the value of NextMarker from the truncated response you just received.
Sourcepub fn set_marker(self, input: Option<String>) -> Self
pub fn set_marker(self, input: Option<String>) -> Self
Use this parameter in a subsequent request after you receive a response with truncated results. Set it to the value of NextMarker from the truncated response you just received.
Sourcepub fn get_marker(&self) -> &Option<String>
pub fn get_marker(&self) -> &Option<String>
Use this parameter in a subsequent request after you receive a response with truncated results. Set it to the value of NextMarker from the truncated response you just received.
Trait Implementations§
Source§impl Clone for DescribeCustomKeyStoresFluentBuilder
impl Clone for DescribeCustomKeyStoresFluentBuilder
Source§fn clone(&self) -> DescribeCustomKeyStoresFluentBuilder
fn clone(&self) -> DescribeCustomKeyStoresFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DescribeCustomKeyStoresFluentBuilder
impl !RefUnwindSafe for DescribeCustomKeyStoresFluentBuilder
impl Send for DescribeCustomKeyStoresFluentBuilder
impl Sync for DescribeCustomKeyStoresFluentBuilder
impl Unpin for DescribeCustomKeyStoresFluentBuilder
impl !UnwindSafe for DescribeCustomKeyStoresFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);