aws_sdk_kms::operation::update_custom_key_store::builders

Struct UpdateCustomKeyStoreFluentBuilder

Source 
pub struct UpdateCustomKeyStoreFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to UpdateCustomKeyStore.

Changes the properties of a custom key store. You can use this operation to change the properties of an CloudHSM key store or an external key store.

Use the required CustomKeyStoreId parameter to identify the custom key store. Use the remaining optional parameters to change its properties. This operation does not return any property values. To verify the updated property values, use the DescribeCustomKeyStores operation.

This operation is part of the custom key stores feature in KMS, which combines the convenience and extensive integration of KMS with the isolation and control of a key store that you own and manage.

When updating the properties of an external key store, verify that the updated settings connect your key store, via the external key store proxy, to the same external key manager as the previous settings, or to a backup or snapshot of the external key manager with the same cryptographic keys. If the updated connection settings fail, you can fix them and retry, although an extended delay might disrupt Amazon Web Services services. However, if KMS permanently loses its access to cryptographic keys, ciphertext encrypted under those keys is unrecoverable.

For external key stores:

Some external key managers provide a simpler method for updating an external key store. For details, see your external key manager documentation.

When updating an external key store in the KMS console, you can upload a JSON-based proxy configuration file with the desired values. You cannot upload the proxy configuration file to the UpdateCustomKeyStore operation. However, you can use the file to help you determine the correct values for the UpdateCustomKeyStore parameters.

For an CloudHSM key store, you can use this operation to change the custom key store friendly name (NewCustomKeyStoreName), to tell KMS about a change to the kmsuser crypto user password (KeyStorePassword), or to associate the custom key store with a different, but related, CloudHSM cluster (CloudHsmClusterId). To update any property of an CloudHSM key store, the ConnectionState of the CloudHSM key store must be DISCONNECTED.

For an external key store, you can use this operation to change the custom key store friendly name (NewCustomKeyStoreName), or to tell KMS about a change to the external key store proxy authentication credentials (XksProxyAuthenticationCredential), connection method (XksProxyConnectivity), external proxy endpoint (XksProxyUriEndpoint) and path (XksProxyUriPath). For external key stores with an XksProxyConnectivity of VPC_ENDPOINT_SERVICE, you can also update the Amazon VPC endpoint service name (XksProxyVpcEndpointServiceName). To update most properties of an external key store, the ConnectionState of the external key store must be DISCONNECTED. However, you can update the CustomKeyStoreName, XksProxyAuthenticationCredential, and XksProxyUriPath of an external key store when it is in the CONNECTED or DISCONNECTED state.

If your update requires a DISCONNECTED state, before using UpdateCustomKeyStore, use the DisconnectCustomKeyStore operation to disconnect the custom key store. After the UpdateCustomKeyStore operation completes, use the ConnectCustomKeyStore to reconnect the custom key store. To find the ConnectionState of the custom key store, use the DescribeCustomKeyStores operation.

Before updating the custom key store, verify that the new values allow KMS to connect the custom key store to its backing key store. For example, before you change the XksProxyUriPath value, verify that the external key store proxy is reachable at the new path.

If the operation succeeds, it returns a JSON object with no properties.

Cross-account use: No. You cannot perform this operation on a custom key store in a different Amazon Web Services account.

Required permissions: kms:UpdateCustomKeyStore (IAM policy)

Related operations:

  • ConnectCustomKeyStore

  • CreateCustomKeyStore

  • DeleteCustomKeyStore

  • DescribeCustomKeyStores

  • DisconnectCustomKeyStore

Eventual consistency: The KMS API follows an eventual consistency model. For more information, see KMS eventual consistency.

Implementations§

Source§

impl UpdateCustomKeyStoreFluentBuilder

Source

pub fn as_input(&self) -> &UpdateCustomKeyStoreInputBuilder

Access the UpdateCustomKeyStore as a reference.

Source

pub async fn send( self, ) -> Result<UpdateCustomKeyStoreOutput, SdkError<UpdateCustomKeyStoreError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<UpdateCustomKeyStoreOutput, UpdateCustomKeyStoreError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn custom_key_store_id(self, input: impl Into<String>) -> Self

Identifies the custom key store that you want to update. Enter the ID of the custom key store. To find the ID of a custom key store, use the DescribeCustomKeyStores operation.

Source

pub fn set_custom_key_store_id(self, input: Option<String>) -> Self

Identifies the custom key store that you want to update. Enter the ID of the custom key store. To find the ID of a custom key store, use the DescribeCustomKeyStores operation.

Source

pub fn get_custom_key_store_id(&self) -> &Option<String>

Identifies the custom key store that you want to update. Enter the ID of the custom key store. To find the ID of a custom key store, use the DescribeCustomKeyStores operation.

Source

pub fn new_custom_key_store_name(self, input: impl Into<String>) -> Self

Changes the friendly name of the custom key store to the value that you specify. The custom key store name must be unique in the Amazon Web Services account.

Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.

To change this value, an CloudHSM key store must be disconnected. An external key store can be connected or disconnected.

Source

pub fn set_new_custom_key_store_name(self, input: Option<String>) -> Self

Changes the friendly name of the custom key store to the value that you specify. The custom key store name must be unique in the Amazon Web Services account.

Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.

To change this value, an CloudHSM key store must be disconnected. An external key store can be connected or disconnected.

Source

pub fn get_new_custom_key_store_name(&self) -> &Option<String>

Changes the friendly name of the custom key store to the value that you specify. The custom key store name must be unique in the Amazon Web Services account.

Do not include confidential or sensitive information in this field. This field may be displayed in plaintext in CloudTrail logs and other output.

To change this value, an CloudHSM key store must be disconnected. An external key store can be connected or disconnected.

Source

pub fn key_store_password(self, input: impl Into<String>) -> Self

Enter the current password of the kmsuser crypto user (CU) in the CloudHSM cluster that is associated with the custom key store. This parameter is valid only for custom key stores with a CustomKeyStoreType of AWS_CLOUDHSM.

This parameter tells KMS the current password of the kmsuser crypto user (CU). It does not set or change the password of any users in the CloudHSM cluster.

To change this value, the CloudHSM key store must be disconnected.

Source

pub fn set_key_store_password(self, input: Option<String>) -> Self

Enter the current password of the kmsuser crypto user (CU) in the CloudHSM cluster that is associated with the custom key store. This parameter is valid only for custom key stores with a CustomKeyStoreType of AWS_CLOUDHSM.

This parameter tells KMS the current password of the kmsuser crypto user (CU). It does not set or change the password of any users in the CloudHSM cluster.

To change this value, the CloudHSM key store must be disconnected.

Source

pub fn get_key_store_password(&self) -> &Option<String>

Enter the current password of the kmsuser crypto user (CU) in the CloudHSM cluster that is associated with the custom key store. This parameter is valid only for custom key stores with a CustomKeyStoreType of AWS_CLOUDHSM.

This parameter tells KMS the current password of the kmsuser crypto user (CU). It does not set or change the password of any users in the CloudHSM cluster.

To change this value, the CloudHSM key store must be disconnected.

Source

pub fn cloud_hsm_cluster_id(self, input: impl Into<String>) -> Self

Associates the custom key store with a related CloudHSM cluster. This parameter is valid only for custom key stores with a CustomKeyStoreType of AWS_CLOUDHSM.

Enter the cluster ID of the cluster that you used to create the custom key store or a cluster that shares a backup history and has the same cluster certificate as the original cluster. You cannot use this parameter to associate a custom key store with an unrelated cluster. In addition, the replacement cluster must fulfill the requirements for a cluster associated with a custom key store. To view the cluster certificate of a cluster, use the DescribeClusters operation.

To change this value, the CloudHSM key store must be disconnected.

Source

pub fn set_cloud_hsm_cluster_id(self, input: Option<String>) -> Self

Associates the custom key store with a related CloudHSM cluster. This parameter is valid only for custom key stores with a CustomKeyStoreType of AWS_CLOUDHSM.

Enter the cluster ID of the cluster that you used to create the custom key store or a cluster that shares a backup history and has the same cluster certificate as the original cluster. You cannot use this parameter to associate a custom key store with an unrelated cluster. In addition, the replacement cluster must fulfill the requirements for a cluster associated with a custom key store. To view the cluster certificate of a cluster, use the DescribeClusters operation.

To change this value, the CloudHSM key store must be disconnected.

Source

pub fn get_cloud_hsm_cluster_id(&self) -> &Option<String>

Associates the custom key store with a related CloudHSM cluster. This parameter is valid only for custom key stores with a CustomKeyStoreType of AWS_CLOUDHSM.

Enter the cluster ID of the cluster that you used to create the custom key store or a cluster that shares a backup history and has the same cluster certificate as the original cluster. You cannot use this parameter to associate a custom key store with an unrelated cluster. In addition, the replacement cluster must fulfill the requirements for a cluster associated with a custom key store. To view the cluster certificate of a cluster, use the DescribeClusters operation.

To change this value, the CloudHSM key store must be disconnected.

Source

pub fn xks_proxy_uri_endpoint(self, input: impl Into<String>) -> Self

Changes the URI endpoint that KMS uses to connect to your external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

For external key stores with an XksProxyConnectivity value of PUBLIC_ENDPOINT, the protocol must be HTTPS.

For external key stores with an XksProxyConnectivity value of VPC_ENDPOINT_SERVICE, specify https:// followed by the private DNS name associated with the VPC endpoint service. Each external key store must use a different private DNS name.

The combined XksProxyUriEndpoint and XksProxyUriPath values must be unique in the Amazon Web Services account and Region.

To change this value, the external key store must be disconnected.

Source

pub fn set_xks_proxy_uri_endpoint(self, input: Option<String>) -> Self

Changes the URI endpoint that KMS uses to connect to your external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

For external key stores with an XksProxyConnectivity value of PUBLIC_ENDPOINT, the protocol must be HTTPS.

For external key stores with an XksProxyConnectivity value of VPC_ENDPOINT_SERVICE, specify https:// followed by the private DNS name associated with the VPC endpoint service. Each external key store must use a different private DNS name.

The combined XksProxyUriEndpoint and XksProxyUriPath values must be unique in the Amazon Web Services account and Region.

To change this value, the external key store must be disconnected.

Source

pub fn get_xks_proxy_uri_endpoint(&self) -> &Option<String>

Changes the URI endpoint that KMS uses to connect to your external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

For external key stores with an XksProxyConnectivity value of PUBLIC_ENDPOINT, the protocol must be HTTPS.

For external key stores with an XksProxyConnectivity value of VPC_ENDPOINT_SERVICE, specify https:// followed by the private DNS name associated with the VPC endpoint service. Each external key store must use a different private DNS name.

The combined XksProxyUriEndpoint and XksProxyUriPath values must be unique in the Amazon Web Services account and Region.

To change this value, the external key store must be disconnected.

Source

pub fn xks_proxy_uri_path(self, input: impl Into<String>) -> Self

Changes the base path to the proxy APIs for this external key store. To find this value, see the documentation for your external key manager and external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

The value must start with / and must end with /kms/xks/v1, where v1 represents the version of the KMS external key store proxy API. You can include an optional prefix between the required elements such as /example/kms/xks/v1.

The combined XksProxyUriEndpoint and XksProxyUriPath values must be unique in the Amazon Web Services account and Region.

You can change this value when the external key store is connected or disconnected.

Source

pub fn set_xks_proxy_uri_path(self, input: Option<String>) -> Self

Changes the base path to the proxy APIs for this external key store. To find this value, see the documentation for your external key manager and external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

The value must start with / and must end with /kms/xks/v1, where v1 represents the version of the KMS external key store proxy API. You can include an optional prefix between the required elements such as /example/kms/xks/v1.

The combined XksProxyUriEndpoint and XksProxyUriPath values must be unique in the Amazon Web Services account and Region.

You can change this value when the external key store is connected or disconnected.

Source

pub fn get_xks_proxy_uri_path(&self) -> &Option<String>

Changes the base path to the proxy APIs for this external key store. To find this value, see the documentation for your external key manager and external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

The value must start with / and must end with /kms/xks/v1, where v1 represents the version of the KMS external key store proxy API. You can include an optional prefix between the required elements such as /example/kms/xks/v1.

The combined XksProxyUriEndpoint and XksProxyUriPath values must be unique in the Amazon Web Services account and Region.

You can change this value when the external key store is connected or disconnected.

Source

pub fn xks_proxy_vpc_endpoint_service_name( self, input: impl Into<String>, ) -> Self

Changes the name that KMS uses to identify the Amazon VPC endpoint service for your external key store proxy (XKS proxy). This parameter is valid when the CustomKeyStoreType is EXTERNAL_KEY_STORE and the XksProxyConnectivity is VPC_ENDPOINT_SERVICE.

To change this value, the external key store must be disconnected.

Source

pub fn set_xks_proxy_vpc_endpoint_service_name( self, input: Option<String>, ) -> Self

Changes the name that KMS uses to identify the Amazon VPC endpoint service for your external key store proxy (XKS proxy). This parameter is valid when the CustomKeyStoreType is EXTERNAL_KEY_STORE and the XksProxyConnectivity is VPC_ENDPOINT_SERVICE.

To change this value, the external key store must be disconnected.

Source

pub fn get_xks_proxy_vpc_endpoint_service_name(&self) -> &Option<String>

Changes the name that KMS uses to identify the Amazon VPC endpoint service for your external key store proxy (XKS proxy). This parameter is valid when the CustomKeyStoreType is EXTERNAL_KEY_STORE and the XksProxyConnectivity is VPC_ENDPOINT_SERVICE.

To change this value, the external key store must be disconnected.

Source

pub fn xks_proxy_authentication_credential( self, input: XksProxyAuthenticationCredentialType, ) -> Self

Changes the credentials that KMS uses to sign requests to the external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

You must specify both the AccessKeyId and SecretAccessKey value in the authentication credential, even if you are only updating one value.

This parameter doesn't establish or change your authentication credentials on the proxy. It just tells KMS the credential that you established with your external key store proxy. For example, if you rotate the credential on your external key store proxy, you can use this parameter to update the credential in KMS.

You can change this value when the external key store is connected or disconnected.

Source

pub fn set_xks_proxy_authentication_credential( self, input: Option<XksProxyAuthenticationCredentialType>, ) -> Self

Changes the credentials that KMS uses to sign requests to the external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

You must specify both the AccessKeyId and SecretAccessKey value in the authentication credential, even if you are only updating one value.

This parameter doesn't establish or change your authentication credentials on the proxy. It just tells KMS the credential that you established with your external key store proxy. For example, if you rotate the credential on your external key store proxy, you can use this parameter to update the credential in KMS.

You can change this value when the external key store is connected or disconnected.

Source

pub fn get_xks_proxy_authentication_credential( &self, ) -> &Option<XksProxyAuthenticationCredentialType>

Changes the credentials that KMS uses to sign requests to the external key store proxy (XKS proxy). This parameter is valid only for custom key stores with a CustomKeyStoreType of EXTERNAL_KEY_STORE.

You must specify both the AccessKeyId and SecretAccessKey value in the authentication credential, even if you are only updating one value.

This parameter doesn't establish or change your authentication credentials on the proxy. It just tells KMS the credential that you established with your external key store proxy. For example, if you rotate the credential on your external key store proxy, you can use this parameter to update the credential in KMS.

You can change this value when the external key store is connected or disconnected.

Source

pub fn xks_proxy_connectivity(self, input: XksProxyConnectivityType) -> Self

Changes the connectivity setting for the external key store. To indicate that the external key store proxy uses a Amazon VPC endpoint service to communicate with KMS, specify VPC_ENDPOINT_SERVICE. Otherwise, specify PUBLIC_ENDPOINT.

If you change the XksProxyConnectivity to VPC_ENDPOINT_SERVICE, you must also change the XksProxyUriEndpoint and add an XksProxyVpcEndpointServiceName value.

If you change the XksProxyConnectivity to PUBLIC_ENDPOINT, you must also change the XksProxyUriEndpoint and specify a null or empty string for the XksProxyVpcEndpointServiceName value.

To change this value, the external key store must be disconnected.

Source

pub fn set_xks_proxy_connectivity( self, input: Option<XksProxyConnectivityType>, ) -> Self

Changes the connectivity setting for the external key store. To indicate that the external key store proxy uses a Amazon VPC endpoint service to communicate with KMS, specify VPC_ENDPOINT_SERVICE. Otherwise, specify PUBLIC_ENDPOINT.

If you change the XksProxyConnectivity to VPC_ENDPOINT_SERVICE, you must also change the XksProxyUriEndpoint and add an XksProxyVpcEndpointServiceName value.

If you change the XksProxyConnectivity to PUBLIC_ENDPOINT, you must also change the XksProxyUriEndpoint and specify a null or empty string for the XksProxyVpcEndpointServiceName value.

To change this value, the external key store must be disconnected.

Source

pub fn get_xks_proxy_connectivity(&self) -> &Option<XksProxyConnectivityType>

Changes the connectivity setting for the external key store. To indicate that the external key store proxy uses a Amazon VPC endpoint service to communicate with KMS, specify VPC_ENDPOINT_SERVICE. Otherwise, specify PUBLIC_ENDPOINT.

If you change the XksProxyConnectivity to VPC_ENDPOINT_SERVICE, you must also change the XksProxyUriEndpoint and add an XksProxyVpcEndpointServiceName value.

If you change the XksProxyConnectivity to PUBLIC_ENDPOINT, you must also change the XksProxyUriEndpoint and specify a null or empty string for the XksProxyVpcEndpointServiceName value.

To change this value, the external key store must be disconnected.

Trait Implementations§

Source§

impl Clone for UpdateCustomKeyStoreFluentBuilder

Source§

fn clone(&self) -> UpdateCustomKeyStoreFluentBuilder

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for UpdateCustomKeyStoreFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to Color::Primary.

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to Color::Fixed.

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to Color::Rgb.

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to Color::Black.

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to Color::Red.

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to Color::Green.

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::Yellow.

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::Blue.

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::Magenta.

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::Cyan.

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to Color::White.

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlack.

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightRed.

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightGreen.

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightYellow.

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightBlue.

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightMagenta.

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightCyan.

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to Color::BrightWhite.

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to Color::Primary.

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to Color::Fixed.

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to Color::Rgb.

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::Black.

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::Red.

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::Green.

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::Yellow.

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::Blue.

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::Magenta.

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::Cyan.

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::White.

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlack.

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightRed.

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightGreen.

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightYellow.

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightBlue.

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightMagenta.

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightCyan.

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to Color::BrightWhite.

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Bold.

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Dim.

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Italic.

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Underline.

§Example
println!("{}", value.underline());

Returns self with the attr() set to Attribute::Blink.

§Example
println!("{}", value.blink());

Returns self with the attr() set to Attribute::RapidBlink.

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Invert.

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Conceal.

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to Attribute::Strike.

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Mask.

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Wrap.

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Linger.

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to Quirk::Clear.

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Resetting.

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::Bright.

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to Quirk::OnBright.

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,

Source§

impl<T> MaybeSendSync for T